Hüsing N, Schubert U. Aerogels-airy materials: Chemistry, structure, and properties [J]. Angew Chem Int Ed, 1998, 37(1/2): 22-45.
[2]
Hüsing N, Schubert U. Aerogels [M]. Weinheim: Wiley, 2005: 1-27.
[3]
Schmidt M, Schwertfeger F. Applications for silica aerogel products [J]. J Non-Cryst Solids, 1998, 225: 364-368.
[4]
Hrubesh L W. Aerogel applications [J]. J Non-Cryst Solids, 1998, 225: 335-342.
[5]
杨海龙, 倪 文, 陈德平, 等. 制备条件对硅酸钙复合纳米孔超级绝热材料的热导率的影响 [J]. 北京科技大学学报, 2008, 30(1): 57-62. Yang Hailong, Ni Wen, Chen Deping, et al. Effect of preparation condition on the thermal conductivity of xonotlite-silica aerogel nanoporous super insulation materials [J]. Journal of University of Science and Technology Beijing, 2008, 30(1): 57-62.
[6]
Yang H L, Ni W, Chen D P, et al. Mechanism of low thermal conductivity of xonotlite-silica aerogel nanoporous super insulation material [J]. International Journal of Minerals Metallurgy and Materials, 2008, 15(5): 649-653.
[7]
杨海龙, 倪 文, 梁 涛, 等. 硅酸铝纤维增强纳米孔绝热材料的制备与表征 [J]. 材料工程, 2007(7): 63-66. Yang Hailong, Ni Wen, Liang Tao, et al. Preparation and characterization of nanoporous super insulation materials reinforced with aluminum silicate fiber [J]. Journal of Materials Engineering, 2007(7): 63-66.
[8]
冯 坚, 高庆福, 张长瑞, 等. SiO2溶胶配比对气凝胶隔热复合材料力学性能的影响 [J]. 复合材料学报, 2010, 27(6): 179-183. Feng Jian, Gao Qingfu, Zhang Changrui, et al. Effect of SiO2 sol proportion on the mechanical properties of aerogel insulation composites [J]. Acta Materiae Compositae Sinica, 2010, 27(6): 179-183.
[9]
Parmenter K E, Milstein F. Mechanical properties of silica aerogels [J]. J Non-Cryst Solids, 1998, 223(3): 179-189.
[10]
Zhang Z H, Shen J, Ni X Y, et al. Hydrophobic silica aerogels strengthened with nonwoven fibers [J]. J Macromol Sci, Part A: Pure Appl Chem, 2006, 43(11): 1663-1670.
[11]
Karout A, Buisson P, Perrard A, et al. Shaping and mechanical reinforcement of silica aerogel biocatalysts with ceramic fiber felts [J]. J Sol-Gel Sci Technol, 2005, 36(2): 163-171.
[12]
Aspen Aerogels, Inc. Products grid and case studies. http://www.aerogel.com.
[13]
White S, Rasky D. Tough, lightweight, supper insulating aerogel/tile composite have potential industrial applications [J]. Mater Technol, 1999, 14(1): 13-16.
[14]
Katti A, Shimpi N, Roy S, et al. Chemical, physical, and mechanical characterization of isocyanate cross-linked amine-modified silica aerogels [J]. Chem Mater, 2006, 18(2): 285-296.
[15]
Zhang G H, Dass A, Rawashdeh A M, et al. Isocyanate-crosslinked silica aerogel monoliths: Preparation and characterization [J]. J Non-Cryst Solids, 2004, 350: 152-164.
Capadona L A, Meador M A B, Alunni A, et al. Flexible, low-density polymer crosslinked silica aerogels [J]. Polymer, 2006, 47(16): 5754-5761.
[18]
Meador M A, Capadona L A, Mccorkle L, et al. Structure-property relationships in porous 3D nanostructures as a function of preparation conditions: Isocyanate cross-linked silica aerogels [J]. Chem Mater, 2007, 19(9): 2247-2260.
[19]
Nguyen B N, Meador M A B, Medoro A, et al. Elastic behavior of methyltrimethoxysilane based aerogels reinforced with tri-isocyanate [J]. ACS Appl Mater Interfaces, 2010, 2(5): 1430-1443.
[20]
Meador M A B, Scherzer C M, Vivod S L, et al. Epoxy reinforced aerogels made using a streamlined process [J]. ACS Appl Mater Interfaces, 2010, 2(7): 2162-2168.
[21]
Mulik S, Sotiriou-Leventis C, Churu G, et al. Cross-linking 3D assemblies of nanoparticles into mechanically strong aerogels by surface-initiated free-radical polymerization [J]. Chem Mater, 2008, 20(15): 5035-5046.
[22]
Meador M A B, Fabrizio E F, Ilhan F, et al. Cross-linking amine-modified silica aerogels with epoxies: Mechanically strong lightweight porous materials [J]. Chem Mater, 2005, 17(5): 1085-1098.
[23]
Ilhan U F, Fabrizio E F, Mccorkle L, et al. Hydrophobic monolithic aerogels by nanocasting polystyrene on amine-modified silica [J]. J Mater Chem, 2006, 16(29): 3046-3054.
[24]
Leventis N, Palczer A, Mccorkle L, et al. Nanoengineered silica-polymer composite aerogels with no need for supercritical fluid drying [J]. J Sol-Gel Sci Technol, 2005, 35(2): 99-105.
[25]
Leventis N, Sotiriou-Leventis C, Zhang G H, et al. Nanoengineering strong silica aerogels [J]. Nano Lett, 2002, 2(9): 957-960.
[26]
Meador M A B, Weber A S, Hindi A, et al. Structure-property relationships in porous 3D nanostructures: Epoxy-cross-linked silica aerogels produced using ethanol as the solvent [J]. ACS Appl Mater Interfaces, 2009, 1(4): 894-906.
[27]
Nguyen B N, Meador M A B, Tousley M E, et al. Tailoring elastic properties of silica aerogels cross-linked with polystyrene [J]. ACS Appl Mater Interfaces, 2009, 1(3): 621-630.
[28]
Nilsen E, Einarsrud M A, Scherer G W. Effect of precursor and hydrolysis conditions on drying shrinkage [J]. J Non-Cryst Solids, 1997, 221(2/3): 135-143.
[29]
Smith D M, Scherer G W, Anderson J M. Shrinkage during drying of silica gel [J]. J Non-Cryst Solids, 1995, 188(3): 191-206.
