Yau S S, Chou T W. Strength of woven-fabric composites with drilled and molded holes [M]//Composite Materials: Testing and Design. American Society for Testing and Materials(ASTM), 1988: 423-437.
[2]
Eiblmeier J, Loughlan J. The buckling response of carbon fibre composite panels with reinforced cut-outs [J]. Composite Structures, 1995, 32: 97-113.
[3]
Mahdi S, Kinloch A J, Matthews F L, Crisfield M A. The mechanical performance of repaired stiffened panels Ⅰ : Experimental characterization [J]. Composites, 2002, 33: 343- 354.
[4]
Mahdi S, Kinloch A J, Crisfield M A, Matthews F L. The mechanical performance of repaired stiffened panels Ⅱ : Finite element modelling [J]. Composites, 2002, 33: 355-366.
[5]
Konrad G, Tamara H, Holger O. Application of the tailored fibre placement (TFP) process for a local reinforcement on an"open-hole"tension plate from carbon/epoxy laminates [J]. Composites Science and Technology, 2003, 63: 81-88.
[6]
罗小东, 寇长河, 于卫东, 石天路. 复合材料层合结构开口的非对称补强研究 [J]. 航空学报, 1994, 15(12): 1478-1481. Luo Xiaodong, Kou Changhe, Yu Weidong, Shi Tianlu.Asymmetric submerged reinforcement of composite laminates containing a circular hole [J]. Acta Aeronautica et Astronautica Sinica, 1994, 15(12): 1478-1481.
姜云鹏, 张庆茂, 王 毅, 岳珠峰. 复合材料层合板开口翻边补强试验和数值模拟 [J]. 复合材料学报, 2005, 22(5): 190-196. Jiang Yunpeng, Zhang Qingmao, Wang Yi, Yue Zhufeng. Experiment studies and FEM simulation of repaired composite laminates [J]. Acta Materiae Compositae Sinica, 2005, 22(5): 190-196.
[9]
李 黎, 黎观生. 三维编织复合材料孔边特性的工程计算及分析 [J]. 复合材料学报, 2006, 23(3): 176-180. Li Li, Li Guansheng. Engineering calculation and analysis for properties near the hole edge of 3D braided composites [J]. Acta Materiae Compositae Sinica, 2006, 23(3): 176-180.
[10]
Mouritz A P, Leong K H, Herszberg I. A review of the effect of stitching on the in-plane mechanical properties of the fiber-reinforced polymer composites [J]. Composites Part A, 1997, 28: 979-991.
[11]
Mouritz A P, Cox D N. A mechanistic approach to the properties of stitched laminates [J]. Composites Part A, 2000, 31: 1-27.
[12]
焦亚男, 李嘉禄, 韩雪梅, 孙其永. 缝合连接三维编织复合材料拉伸性能试验研究 [J]. 复合材料学报, 2008, 25(1): 127-132. Jiao Yanan, Li Jialu, Han Xuemei, Sun Qiyong. Experimental investigation on tensile property of stitching joint 3D braided composites [J]. Acta Materiae Compositae Sinica, 2008, 25(1): 127-132.
[13]
李 晨, 许希武. 缝合复合材料层板三维纤维弯曲模型及压缩强度预报 [J]. 复合材料学报, 2006, 23(6): 179-185. Li Chen, Xu Xiwu. 3D fiber waviness model and predication of compressive strength of stitched laminates [J]. Acta Materiae Compositae Sinica, 2006, 23(6): 179-185.
[14]
程小全, 郦正能, 寇长河. 缝合复合材料可用性——一般层合板的基本性能 [J]. 复合材料学报, 2004, 21(4): 71-76. Chen Xiaoquan, Li Zhengneng, Kou Changhe. Properties of stitched composite laminates-The principal properties of general laminates [J]. Acta Materiae Compositae Sinica, 2004, 21(4): 71-76.
[15]
孟凡颢, 童小燕, 陈绍杰, 杨 卫. 缝合复合材料弹性常数的有限元分析 //首届全国航空航天领域中的力学问题学术研讨会. 成都: 2004, 130-133. Meng Fanhao, Tong Xiaoyan, Chen Shaojie, Yang Wei. Finite element analysis of stitched-composites’engineering constants //The first academic proseminar about mechanical problems in the domain of aeronautica and astronautica. Chengdu: 2004, 130-133.
[16]
燕 瑛, 韩凤宇, 杨东升, 刘兵山. 缝合复合材料弹性性能的三维有限元细观分析与试验验证 [J]. 航空学报, 2004, 25(3): 267-269. Yan Ying, Han Fengyu, Yang Dongshen, Liu Bingshan. Finite element micromechanical analysis and experimental confirmation of the elastic properties of stitched composite materials [J]. Acta Aeronautica et Astronautica Sinica, 2004, 25(3): 267-269.
[17]
沈观林. 复合材料力学 [M]. 北京: 清华大学出版社, 1995.
[18]
Hashin Z. Fatigue failure criteria for unidirectional fiber composites [J]. Journal of Applied Mechanics, 1981, 47(4): 3292334.
[19]
杜 凯, 矫桂琼, 王 翔. 含离散源损伤复合材料加筋板的拉伸特性 [J]. 复合材料学报, 2008, 25(4): 181-186. Du Kai, Jiao Guiqiong, Wang Xiang. Tensile properties of stiffened composite panels with discrete-source damage [J]. Acta Materiae Compositae Sinica, 2008, 25(4): 181-186.
[20]
韩小平, 曹效昂, 朱西平, 岳珠峰. 孔口缝合补强对含孔层板应变集中影响的实验研究 [J]. 复合材料学报, 2006, 23(4): 169-174. Han Xiaoping, Cao Xiaoang, Zhu Xiping, Yue Zhufeng. Experimental investigation on strain concentration in composite laminates with a circular hole [J]. Acta Materiae Compositae Sinica, 2006, 23(4): 169-174.
