Glaessgen E H, Raju I S. Debonding of stitched composite sandwich structures. Atlanta, GA: AIAA, 2000, 1614-2000.
[2]
杜善义, 章继峰, 张博明. 先进复合材料格栅结构(AGS)应用与研究进展 [J]. 航空学报, 2007, 28(2): 419-424. Du Shanyi, Zhang Jifeng, Zhang Boming. Overview of application and research on advanced composite grid structures [J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(2): 419-424.
[3]
Seibert H. Applications for PMI foam in aerospace sandwich structures [J]. Reinforced Plastics, 2006, 50(1): 44-48.
[4]
郑晓霞, 郑锡涛, 屈天骄, 等. 缝纫泡沫芯夹层结构低速冲击损伤分析 [J]. 西北工业大学学报, 2010, 28(5): 774-779. Zheng Xiaoxia, Zheng Xitao, Qu Tianjiao, et al. Exploring damage characteristics of stitched foam-core sandwich structure under low-velocity impact [J]. Journal of Northwestern Polytechnical University, 2010, 28(5): 774-779.
[5]
Stanley L E, Adams D O. Development and evaluation of stitched sandwich panelsz, CR-211025. Washington: NASA, 2001.
[6]
Marasco A I, Cartié D D R, Partridge I K, et al. Mechanical properties balance in novel Z-pinned sandwich panels: Out of plane properties [J]. Composites Part A, 2006, 37(2): 295- 302.
[7]
Carastensen T C, Kunkel E, Magee C. X-cor advanced sandwich core material //33rd International SAMPE Technial Conference. Seattle, WA: CSA, 2001, 11: 452-466.
[8]
季苏东, 李 敏, 孙志杰, 等. 斜缝与Z-pin混合增强泡沫夹层复合材料力学性能实验研究 [J]. 复合材料学报, 2010, 27(4): 87-93. Ji Sudong, Li Min, Sun Zhijie, et al. Experimental study on the mechanical properties of sandwich composite reinforced by bias stitching and Z-pin inserting [J]. Acta Materiae Compositae Sinica, 2010, 27(4): 87-93.
[9]
郝继军, 张佐光, 李 敏, 等. X-cor夹层复合材料平压性能分析 [J]. 航空学报, 2008, 29(4): 1079-1083. Hao Jijun, Zhang Zuoguang, Li Min, et al. Compression property analysis of X-cor sandwich composites [J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(4): 1079-1083.
[10]
杜 龙, 矫桂琼, 黄 涛, 等. Z-pin增强泡沫夹层结构面压缩性能研究 [J]. 航空材料学报, 2008, 28(4): 101-105. Du Long, Jiao Guiqiong, Huang Tao, et al. Through-thickness compression properties of Z-pin reinforced foam core sandwich [J]. Journal of Aeronautical Materials, 2008, 28(4): 101-105.
[11]
马元春, 韩海涛, 卢子兴, 等. 缝纫泡沫夹芯复合材料的刚度预测与试验验证 [J]. 复合材料学报, 2010, 27(5): 101-107. MA Yuanchun, Han Haitao, Lu Zixing, et al. Theoretical prediction and experimental study of the stiffness of stitched foam-core sandwich composites [J]. Acta Materiae Compositae Sinica, 2010, 27(5): 101-107.
[12]
马元春, 韩海涛, 卢子兴, 等. 缝纫泡沫夹芯复合材料失效强度的理论预测与试验验证 [J]. 复合材料学报, 2010, 27(5): 112-119. Ma Yuanchun, Han Haitao, Lu Zixing, et al. Theoretical prediction and experimental study of the failure strength of stitched foam-core sandwich composites [J]. Acta Materiae Compositae Sinica, 2010, 27(5): 112-119.
[13]
Zenkert D, Burman M. Failure mode shifts during constant amplitude fatigue loading of GFRP/foam core sandwich beams [J]. International Journal of Fatigue, 2011, 33: 217-222.
[14]
郑锡涛, 孙 秦, 李 野, 等. 全厚度缝合复合材料泡沫芯夹层结构力学性能研究与损伤容限评定 [J]. 复合材料学报, 2006, 23(6): 29-36. Zheng Xitao, Sun Qin, Li Ye, et al. Mechanical behavior and damage tolerance tests of composites through thickness stitched foam sandwich panels [J]. Acta Materiae Compositae Sinica, 2006, 23(6): 29-36.
