Wang Xueming, Zhang Zuoguang, Xie Fuyuan, Li Min. Correlated rules between complex structure of composite components and manufacturing defects in autoclave molding technology [J]. Journal of Reinforced Plastics and Composites, 2009, 28(22): 2791-2803.
[2]
Pavier M J, Chester W T. Compression failure of carbon fibre-reinforced coupons containing central delaminations [J]. Composites, 1990, 21(1): 23-31.
[3]
Riccio A, Scaramuzzino F, Perugini P. Embedded delamination growth in composite panels under compressive load [J]. Composites: Part B, 2001, 32: 209-218.
[4]
Chen Haoran, Sun Xiannian. Residual compressive strength of laminated plates with delamination [J]. Composite Structures, 1999, 47: 711-717.
[5]
Freitas de M, Carvalho de R. Residual strength of a damaged laminated CFRP under compressive fatigue stresses [J]. Composites Science and Technology, 2006, 66: 373-378.
[6]
程小全, 王 进, Ali Al-Mansour, 等. 含矩形边缘分层缺陷层合板的压缩性能 [J]. 复合材料学报, 2007, 24(2): 151-158. Cheng Xiaoquan, Wang Jin, Ali Al-Mansour, et al. Study on compressive properties of composite laminates with edge rectangular delamination defect [J]. Acta Materiae Compositae Sinica, 2007, 24(2): 151-158.
[7]
任浩雷, 刘元镛, 矫桂琼. 含预制分层损伤复合材料层合板在压缩载荷下破坏过程和剩余强度的模拟 [J]. 工程力学, 2002, 19(6): 110-114. Ren Haolei, Liu Yuanyong, Jiao Guiqiong. A simulation of compression failure process and residual strength in laminated composites containing a prefab delamination damage [J]. Engineering Mechanics, 2002, 19(6): 110-114.
[8]
陈群志, 关志东, 王 进. 分层缺陷对复合材料结构疲劳寿命影响研究 [J]. 机械强度, 2004, 26(S): 121-123. Chen Qunzhi, Guan Zhidong, Wang Jin. Study on influence of delmiantion flaw on fatigue life of composite structures [J]. Journal of Mechanical Strength, 2004, 26(S): 121-123.
[9]
陈丽华, 徐元铭, 刘 博. 复合材料分层问题中界面层方面的数值研究 [J]. 复合材料学报, 2010, 27(3): 144-149. Chen Lihua, Xu Yuanming, Liu Bo. Numerical study of cohesive zone approach for simulation of delamiantion in laminated composites [J]. Acta Materiae Compositae Sinica, 2010, 27(3): 144-149.
