Ghannadpour S A M, Najafi A, Mohammadi B. On the buckling behavior of cross-ply laminated composite plates due to circular/elliptical cutouts [J]. Composite Structures, 2006, 75: 3-6.
[3]
Jain P, Kumar A. Postbuckling response of square laminates with a central circular/elliptical cutout [J]. Composite Structures, 2004, 65(2): 179-185.
[4]
Komur M A, Sen F, Atas A, et al. Buckling analysis of laminated composite plates with an elliptical/circular cutout using FEM [J]. Advances in Engineering Software, 2010, 41(2): 161-164.
[5]
Komur M A, Sonmez M. Elastic buckling of rectangular plates under linearly varying in-plane normal load with a circular cutout [J]. Mechanics Research Communications, 2008, 35(6): 361-371.
[6]
Oabay M, Ozer D. The analysis of elasto-plastic stresses in the composite laminate with a circular hole subjected to in-plane loads by means of finite element method [J]. Journal of Reinforced Plastics and Composites, 2005, 24(6): 621-631.
[7]
Singh S B, Kumar A. Postbuckling response and failure of symmetric laminates under in-plane shear [J]. Composite Science Technology, 1998, 58(12): 1949-1960.
[8]
Kumar D, Singh S B. Postbuckling strengths of composite laminate with various shaped cutouts under in-plane shear [J]. Composite Structures, 2010, 92(12): 2966-2978.
[9]
Kumar D, Singh S B. Effects of boundary conditions on buckling and postbuckling responses of composite laminate with various shaped cutouts [J]. Composite Structures, 2010, 92(3): 769-779.
[10]
Guo S, Zhou L, Cheung C W. Cutout reinforcements for shear loaded laminate and sandwich composite panels [J]. Int J Mech Mater Des, 2008, 41: 57-71.
[11]
Guo S J. Stress concentration and buckling behaviour of shear loaded composite panels with reinforced cutouts [J]. Composite Structures, 2007, 80(1): 1-9.
[12]
王丹勇, 温卫东, 崔海涛. 含孔复合材料层合板静拉伸三维逐渐损伤分析 [J]. 力学学报, 2005, 37(6): 788-795. Wang Danyong, Wen Weidong, Cui Haitao. Three-dementional progressive damege analysis of composite laminates containing a hole subjected to tensile load [J]. Chinese Journal of Theoretical and Applied Mechanics, 2005, 37(6): 788-795.
[13]
韩小平, 郭章新, 朱希平, 等. 含孔复合材料层合板孔边的力集中 [J]. 复合材料学报, 2009, 26(1): 168-173. Han Xiaoping, Guo Zhangxin, Zhu Xiping, et al. Stress distribution near the opening and stress concentration for composite laminates with a circular opening [J]. Acta Materiae Compositae Sinica, 2009, 26(1): 168-173.
[14]
韩小平, 曹效昂, 朱西平, 等. 孔口缝合补强对含孔层板应变集中影响的试验研究 [J]. 复合材料学报, 2006, 23(4): 169-174. Han Xiaoping, Cao Xiaoang, Zhu Xiping, et al. Experimental investigation on strain concentration in composite laminates with a circular hole [J]. Acta Materiae Compositae Sinica, 2006, 23(4): 169-174.
