Zhou G, Movva S, Guerra D, Lee L J. Preparation and properties of nano-particle and long fiber reinforced thermoset composites//Proceedings of ANTEC 2007. Cincinnati, OH: ANTEC, 2007.
[2]
Veers P S, Ashwill T D, Sutherland H J, et al. Trends in the design, manufacture and evaluation of wind turbine blades[J]. Wind Energy, 2003, 6(3): 245-259.
[3]
Kris H, Daniela D. New set-up for permeability properties of fibrous reinforcement for RTM[J]. Composite Part A, 2002, 33(1): 959-969.
[4]
段华军, 马会茹. RTM工艺国内外研究现状[J]. 玻璃钢/复合材料, 2000(5): 462-471. Duan Huajun, Ma Huiru. Research status of RTM process at home and abroad[J]. Fiber Reinforced Plastic/Composite, 2000(5): 462-471.
[5]
Long A C. Process modeling for liquid moulding of braided preforms[J]. Composites Part A, 2001, 32(7): 941-953.
[6]
戴福红, 张博明, 杜善义. 基于均匀化方法的单向纤维增强体渗透率预报[J]. 力学学报, 2004, 36(6): 709-713. Dai Fuhong, Zhang Boming, Du Shanyi. Permeability estimation of unidirectional reinforcements based on the homogenization theory[J].Acta Mechanica Sinica, 2004, 36(6): 709-713.
[7]
李嘉禄, 吴晓青, 冯 驰. RTM中纤维渗透率预测的研究进展[J]. 复合材料学报, 2006, 23(6): 1-8. Li Jialu, Wu Xiaoqing, Feng Chi. Research progress on the permeability prediction of fiber in RTM[J]. Acta Materiae Compositae Sinica, 2006, 23(6): 1-8.
[8]
陈 萍, 李宏运, 陈祥宝. 铺层方式对织物渗透率的影响[J]. 复合材料学报, 2001, 18(1): 30-33. Chen Ping, Li Hongyun, Chen Xiangbao, Effect of layers on permeability[J].Acta Materiae Compositae Sinica, 2001, 18(1): 30-33.
[9]
Chan A W, Hwang S T. Modeling of impregnation process during resin transfer molding[J]. Polymer Engand Sci, 1991, 31(15): 1149-1156.
[10]
Parnas R S, Flynn K M, Dal-Favero M E.A permeability database for composite manufacturing[J]. Polymer Composites, 1997, 18(5): 623-633.
