Ashby M F. Drivers for material development in the 21 century[J]. Progress in Materials Science, 2001, 46(3/4): 191-199.
[2]
泮世东, 冯吉才, 吴林志. 金字塔点阵夹芯结构的精细优化设计[J]. 哈尔滨工业大学学报, 2011, 43(1): 29-33. Pan Shidong, Feng Jicai, Wu Linzhi. Refined optimal design of sandwich structures with modified pyramidal lattice cores[J]. Journal of Harbin Institute of Technology, 2011, 43(1): 29-33.
[3]
熊 健, 马 力, 杨金水, 吴林志. 碳纤维复合材料金字塔点阵结构制备工艺及力学性能研究[J]. 固体力学学报, 2011, 32(S1): 8-13. Xiong Jian, Ma Li, Yang Jinshui, Wu Linzhi. Fabrication and mechanical response of carbon fiber sandwich panels with pyramidal truss cores[J]. Chinese Journal of Solid Mechanics, 2011, 32(S1): 8-13.
[4]
吴林志, 熊 健, 马 力, 王 兵, 张国旗, 杨金水. 新型复合材料点阵结构的研究进展[J]. 力学进展, 2012, 42(1): 41-67. Wu Linzhi, Xiong Jian, Ma Li, Wang Bing, Zhang Guoqi, Yang Jinshui. Progress in the study on novel composite sandwich panels with lattice truss cores[J]. Advances in Mechanics, 2012, 42(1): 41-67.
[5]
王 兵, 冯吉才, 李庆飞, 吴林志, 马 力. 纤维柱增强泡沫夹芯的等效力学性能研究[J]. 哈尔滨工业大学学报, 2012, 44(3): 29-33. Wang Bing, Feng Jicai, Li Qingfei, Wu Linzhi, Ma Li. Study on the effective mechanical properties of foam core sandwich structure reinforced by fiber composite columns[J]. Journal of Harbin Institute of Technology, 2012, 44(3): 29-33.
[6]
范华林, 杨 卫, 方岱宁, 等. 新型碳纤维点阵复合材料技术研究[J]. 航空材料学报, 2007, 27(1): 46-50. Fan Hualin, Yang Wei, Fang Daining, et al. Interlacing technique for new carbon fiber lattice materials[J]. Journal of Aeronautical Materials, 2007, 27(1): 46-50.
[7]
孙雨果, 高 亮. 复合材料点阵夹芯结构的换热特性[J]. 复合材料学报, 2011, 28(4): 185-195. Sun Yuguo, Gao Liang. Heat transfer characteristics of composite sandwich structure with lattice cores[J]. Acta Materiae Compositae Sinica, 2011, 28(4): 185-195.
[8]
邱志平, 马 一, 王晓军. 含不确定参数的复合材料板振动的区间分析方法[J]. 北京航空航天大学学报, 2004, 30(7): 682-685. Qiu Zhiping, Ma Yi, Wang Xiaojun. Interval analysis method for vibration of composite laminate with uncertain parameters[J]. Journal of Beijing University of Aeronautics and Astronautics, 2004, 30(7): 682-685.
[9]
苑凯华, 邱志平. 含不确定参数的复合材料壁板热颤振分析[J]. 航空学报, 2010, 31(1): 119-124. Yuan Kaihua, Qiu Zhiping. Thermal flutter analysis of composite panel with uncertain parameters[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(1): 119-124.
[10]
Han X, Jiang C, Huang Y H. Transient waves in composite-laminated plates with uncertain load and material property[J]. International Journal for Numerical Methods in Engineering, 2008, 75(3): 253-274.
[11]
Jiang C, Han X, Liu G P. Uncertain optimization of composite laminated using a nonlinear interval number programming method[J]. Computers and Structures, 2008, 86(17/18): 1696-1703.
[12]
郭惠昕. 望大望小特性设计目标的模糊稳健优化设计方法[J]. 西安交通大学学报, 2002, 36(5): 532-535, 540. Guo Huixin. Method for the fuzzy robust optimal design of the design objective with small-the-best or large-the-best characteristic[J]. Journal of Xi’an Jiaotong University, 2002, 36(5): 532-535, 540.
[13]
Houl A, Gramoll K. Design and fabrication of CFRP interstage attach fitting for launch vehicles[J]. Journal of Aerospace Engineering, 1999, 12(3): 83-91.
[14]
Vasiliev V V, Barynin V A, Basin A F. Anisogrid lattice structures survey of development and application[J]. Composite Structures, 2001, 54(2/3): 361-370.
[15]
Deshpande V S, Ashby M F, Fleck N A. Form topology bending versus stretching dominated architectures[J]. Acta Materialia, 2001, 49(10): 1035-1040.
[16]
Evans A G, Hutchinson J W, Fleck N A, et al. The topological design of multifunctional cellular metals[J]. Progress in Materials Science, 2001, 50(3/4): 309-327.
[17]
Deshpande V S, Fleck N A, Ashby M F. Effective properties of the octet-truss lattice material[J]. Journal of the Mechanics and Physics of Solids, 2001, 49(8): 1747-1769.
[18]
Finnegan K, Kooistra G, Wadley H N G, Deshpande V S. The compressive response of carbon fiber composite pyramidal truss sandwich cores[J]. International Journal of Materials Research, 2007, 98(12): 1264-1272.
[19]
Russell B P, Deshpande V S, Wadley H N G. Quasistatic Deformation and failure modes of composite square honeycombs[J]. Journal of Mechanics of Materials and Structures, 2008, 3(7): 1315-1340.
[20]
Fan H L, Meng F H, Yang W. Sandwich panels with Kagome lattice cores reinforced by carbon fibers[J]. Composite Structures, 2007, 81: 533-539.
[21]
Queheillalt D T, Wadley H N G. Cellular metal lattices with hollow trusses[J]. Acta Materialia, 2005, 53(2): 303-313.
[22]
Sypeck D J. Cellular truss core sandwich structures[J]. Applied Composite Materials, 2005, 12: 229-246.
[23]
Wadley H N G. Cellular metals manufacturing[J]. Advanced Engineering Materials, 2002, 4(10): 726-733.
[24]
Sypeck D J, Wadley H N G. Cellular metal truss core sandwich structures[J]. Advanced Engineering Materials, 2002, 4(10): 759-764.
[25]
Wadley H N G. Multifunctional periodic cellular metals[J]. Philosophical Transactions of the Royal Society A, 2006, 364(1838): 31-68.
[26]
卢天健, 何德坪, 陈常青, 等. 超轻多孔金属材料的多功能特性及应用[J].力学进展, 2006, 36(4): 517-535. Lu Tianjian, He Deping, Chen Changqing, et al. The multi-functionality of ultra-light porous metals and their applications[J]. Advances in Mechanics, 2006, 36(4): 517-535.
[27]
范华林, 杨 卫.轻质高强点阵材料及其力学性能研究进展[J].力学进展, 2007, 37(1): 99-113. Fan Hualin, Yang Wei. Development of lattice materials with high specific stiffness and strength[J]. Advances in Mechanics, 2007, 37(1): 99-113.
[28]
卢天健, 刘 涛, 邓子辰.多孔金属材料多功能化设计的若干进展[J].力学与实践, 2008, 30(1): 1-9. Lu Tianjian, Liu Tao, Deng Zichen. Multifunctional design of cellular metals: A review[J]. Mechanics in Engineering, 2008, 30(1): 1-9.
[29]
吴林志, 殷 莎, 马 力. 复合材料点阵夹芯结构的耦合换热及热应力分析[J]. 功能材料, 2010, 41(6): 969-972. Wu Linzhi, Yin Sha, Ma Li. Coupled heat transfer and thermal stress analysis of composite lattice core sandwich structure[J]. Journal of Functional Materials, 2010, 41(6): 969-972.
[30]
王 兵, 吴林志, 杜善义, 孙雨果, 马 力. 碳纤维增强金字塔点阵夹芯结构的抗压缩性能[J]. 复合材料学报, 2010, 27(1): 133-138. Wang Bing, Wu Linzhi, Du Shanyi, Sun Yuguo, Ma Li. Compressive behavior of sandwich structures with carbon fiber reinforced pyramidal lattice truss cores[J]. Acta Materiae Compositae Sinica, 2010, 27(1): 133-138.
[31]
娄 佳, 马 力, 吴林志. 复合材料四面体点阵夹芯梁的自由振动分析[J]. 固体力学学报, 2011, 32(4): 339-345. Lou Jia, Ma Li, Wu Linzhi. Free vibration analysis of all-composite tetrahedral lattice truss core sandwich beam[J]. Chinese Journal of Solid Mechanics, 2011, 32(4): 339-345.
