岳广全. 整体化复合材料壁板结构固化变形模拟及控制方法研究. 哈尔滨: 哈尔滨工业大学, 2010. Yue Guangquan. Study on simulation and control method of cure-induced deformation for integrated composite panel. Harbin: Harbin Institute of Technology, 2010.
[2]
岳广全, 张博明, 戴福洪, 杜善义. 固化过程中模具与复合材料构件相互作用分析[J]. 复合材料学报, 2010, 27(6): 167-171. Yue Guangquan, Zhang Boming, Dai Fuhong, Du Shanyi. Interaction between mold and composite parts during curing process[J]. Acta Materiae Compositae Sinica, 2010, 27(6): 167-171.
[3]
Fernlund G, Rahman N, Courdji R, et al.Experimental and numerical study of the effect of cure cycle, tool surface, aspect ratio, and the lay-up on the dimensional stability of autoclave-processed composite parts[J]. Composites Part A, 2002, 33(3): 341-351.
[4]
Johnston A, Vaziri R, Poursartip A. A plane strain model for process-induced deformation of laminated composite structures[J]. J Compos Mat, 2001, 35(16): 1435-1469.
[5]
Radford D W, Rennick T S. Separating sources of manufacturing distortion in laminated composites[J]. J Reinforced Plast Compos, 2000, 19(8): 621-641.
[6]
Potter K D, Campbell M, Langer C, et al.The generation of geometrical deformations due to tool part interaction in the manufacture of composite components[J]. Composites Part A, 2005, 36(2): 301-308.
[7]
Satish K B, Lloyd V S. A linear finite element model to predict processing-induced distortion in FRP laminates[J]. Composites Part A, 2005, 36(12): 1666-1674.
[8]
Twigg G, Poursartip A, Fernlund G. An experimental method for quantifying tool-part shear interaction during composites processing[J]. Compos Sci Technol, 2003, 63(13): 1985-2002.
[9]
Twigg G, Poursartip A, Fernlund G. Tool-part interaction in composites processing Ⅰ: Experimental investigation and analytical model[J]. Composites Part A, 2004, 35(1): 121-133.
[10]
沈 真, 章怡宁, 黎观生, 等. 复合材料结构设计手册[M]. 北京: 航空工业出版社, 2001: 40-51. Shen Zhen, Zhang Yining, Li Guansheng, et al. Composites structure design handbook[M]. Beijing: Aviation Industry Press, 2001: 40-51.
[11]
Hughes William J. Metallic materials properties development and standardization[M]. Columbus: Federal Aviation Administration, 2010: 440-451.
[12]
万里冰, 武湛君, 张博明, 等. 光纤布拉格光栅监测复合材料固化[J]. 复合材料学报, 2004, 21(3): 1-5. Wan Libing, Wu Zhanjun, Zhang Boming, et al. Cure monitoring of composites using fiber bragg grating sensors[J]. Acta Materiae Compositae Sinica, 2004, 21(3): 1-5.
[13]
赵海涛. 基于光纤传感技术的复合材料结构全寿命健康监测研究. 哈尔滨: 哈尔滨工业大学, 2008. Zhao Haitao. Research on whole life health monitoring of composites structure based on fiber optic sensing technology. Harbin: Harbin Institute of Technology, 2008.
