Andersson M, Gebart R, Lundstrom S, et al. Development of guidelines for the vacuum infusion process[C]//Proceedings of International Conference on Fiber-Reinforced Polymer. Cambridge: Woodhead Publishing Materials, 2000: 113-120.
[2]
赵晨辉, 张广成, 张悦周. 真空辅助树脂注射成型(VARI)研究进展[J]. 玻璃钢/复合材料, 2009(1): 80-84. Zhao Chenhui, Zhang Guangcheng, Zhang Yuezhou. The development of vacuum assisted resin infusion (VARI)[J]. Fiber Reinforced Plastics/Composites, 2009(1): 80-84.
[3]
陈祥宝. 先进复合材料低成本技术[M]. 北京: 化学工业出版社, 2004: 99-155. Chen Xiangbao. Advanced composites with low cost manufacturing[M]. Beijing: Chemical Industry Press, 2004: 99-155.
[4]
张一帆, 陈 利, 孙 绯, 等. 预定型机织物剪切变形实验研究[J]. 复合材料学报, 2009, 26(3): 29-34. Zhang Yifan, Chen Li, Sun Fei, et al. Experiment research on shear deformation of tackified woven fabrics[J]. Acta Materiae Compositae Sinica, 2009, 26(3): 29-34.
[5]
益小苏. 先进复合材料技术研究与发展[M]. 北京: 国防工业出版社, 2006: 99-107. Yi Xiaosu. Research and development of advanced composite material technology[M]. Beijing: National Defence Industry Press, 2006: 99-107.
[6]
Yu J Z, Cai Z, Ko K F. Formability of textile performs for composite applications I: Characterization experiments[J]. Composites Manufacturing, 1994, 5(2): 113-122.
[7]
廖勇波, 梁子青, 李 玲. 定型剂对复合材料力学性能的影响[J]. 化工新型材料, 2006, 34(10): 62-65. Liao Yongbo, Liang Ziqing, Li Ling. Researching that tackifier A was how to affecting the mechanical performance of composites[J]. New Chemical Materials, 2006, 34(10): 62-65.
[8]
梁子青, 唐邦铭, 李艳亮, 等. 定型剂与树脂基体相容性的研究[J]. 材料工程, 2005(4): 15-17. Liang Ziqing, Tang Bangming, Li Yanliang, et al. Research on compatibility of tackifier and resin[J]. Materials Engineering, 2005(4): 15-17.
Depase E, Hayes B S, Seferis J C. Interlayer toughening of VARTM composites-effects of tackifier loading[C]//47th International SAMPE Symposium and Exhibition. Long Beach: SAMPE, 2002: 417-427.
[11]
Rohatgi V, Lee L J. Moldability of tackified fiber performs in liquid composite molding[J]. Journal of Composite Materials, 1997, 31(7): 720-744.
[12]
李斌太, 张宝艳, 邢丽英, 等. 复合材料双真空袋成型工艺研究[J]. 航空材料学报, 2006, 26(3): 222-225. Li Bintai, Zhang Baoyan, Xing Liying, et al. Double-vacuum-bag process for composites[J]. Journal of Aeronautical Materials, 2006, 26(3): 222-225.
[13]
国家质量技术监督局. GB/T 3356-1999单向纤维增强塑料弯曲性能试验方法[S]. 北京: 中国标准出版社, 1999. State Bureau of Quality and Technical Supervision. GB/T 3356-1999 Test method for flexural properties of unidirectional fiber reinforced plastic[S]. Beijing: China Standard Press, 1999.
[14]
国家标准局. JC/T 773-1996 纤维增强塑料短梁法测定层间剪切强度[S]. 北京: 中国建材工业出版社, 1996. National Bureau of Standards. JC/T 773-1996 Test method for interplay shear strength of unidirectional fiber reinforced plastics[S]. Beijing: China Building Materials Press, 1996.
[15]
中国航空工业总公司. HB 7402-1996 碳纤维复合材料层合板Ⅰ型层间断裂韧性 GⅠC 试验方法[S]. 北京: 航空工业出版社, 1996. Aviation Industry Corporation of China. HB 7402-1996 Test method for mode I interlaminar fracture toughness GⅠC of carbon fiber-reinforced composites laminates[S]. Beijing: Aviation Industry Press, 1996.
[16]
张 明, 安学锋, 唐邦铭, 等. 增韧环氧树脂相结构[J]. 复合材料学报, 2007, 24(1): 13-17. Zhang Ming, An Xuefeng, Tang Bangming, et al. Phase structure of a toughened epoxy system[J]. Acta Materiae Compositae Sinica, 2007, 24(1): 13-17.
[17]
益小苏. 先进树脂基复合材料高性能化理论与实践[M]. 北京: 国防工业出版社, 2011: 381-385. Yi Xiaosu. Theory and application of high-performance polymer matrix composites[M]. Beijing: National Defence Industry Press, 2011: 381-385.
[18]
乌云其其格, 益小苏. 一种中温定型剂及其RTM预制体性能[J]. 材料工程, 2006(3): 37-43. Wuyunqiqige, Yi Xiaosu. A medium-temperature tackifier and tackification behavior[J]. Materials Engineering, 2006, (3): 37-43.
[19]
严柳芳. 双轴向经编增强织物缝合工艺对复合材料力学性能影响的研究[D]. 上海: 东华大学, 2006. Yan Liufang. Study on the influence of stitching technique of bⅠaxial warp-knitted fabrics on mechanical performance of composites[D]. Shanghai: Donghua University, 2006.
[20]
赵时熙, 王 波, 陈焕春, 等. 高模量碳环氧复合材料混合模式分层断裂研究[J]. 中国空间科学技术, 1998, 18(5): 25-30. Zhao Shixi, Wang Bo, Chen Huanchun, et al. Mixed mode interlaminar fracture of high modulus carbon epoxy composites[J]. Chinese Space Science and Technology, 1998, 18(5): 25-30.
