全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

胶原蛋白/低密度聚乙烯复合材料的制备与性能

, PP. 944-948

Keywords: 低密度聚乙烯,胶原蛋白,马来酸酐接枝低密度聚乙烯,复合材料,相容剂

Full-Text   Cite this paper   Add to My Lib

Abstract:

为了探讨胶原蛋白(HC)和相容剂马来酸酐接枝低密度聚乙烯(LDPE-g-MAH)对聚合物材料性能产生的影响,以低密度聚乙烯(LDPE)为基体,用共混挤出的方法制备了HC/LDPE复合材料和HC/LDPE-MAH复合材料,并将复合材料注塑成不同规格样条。通过力学性能测试、SEM和热分析等表征方法研究了HC和LDPE-g-MAH含量对HC/LDPE及HC/LDPE-MAH复合材料结构和性能的影响。结果表明:当HC加入量为5wt%时,HC/LDPE复合材料拉伸强度达到最大值15.824MPa;LDPE-g-MAH的加入可明显改善界面粘结性,提高材料力学性能及热稳定性,当HC含量为20wt%,LDPE-g-MAH含量为4wt%时,HC/LDPE-MAH复合材料的拉伸性能最优。

References

[1]  蒋挺大. 胶原蛋白[M]. 北京: 化学工业出版社, 2001: 5-9. Jiang Tingda. Collagen[M]. Beijing: Chemical Industry Press, 2001: 5-9.
[2]  汪建根, 张新强, 杨奎. 胶原蛋白改性及其应用研究的进展[J]. 中国皮革, 2007, 36(5): 52-55. Wang Jiangen, Zhang Xinqiang, Yang Kui. The modification and application of basic research of collagen[J]. China Leather, 2007, 36(5): 52-55.
[3]  Kobayashi K, Maehata Y, Kawamura Y, et al. Direct assessments of the antioxidant effect of the novel collagen peptide on reactive oxygen species using electron spin resonance spectroscopy[J]. Journal of Pharmacological Sciences, 2011, 116(1): 97-106.
[4]  Saha N, Kresalkova M, Saha L, et al. The effect of anaerobic digestion on chrome sludge, a by-product of solid tanned leather waste[J]. Journal of the American Leather Chemists Association, 2003, 98(7): 255-261.
[5]  Mohamed O A, EI Sayed N H, Abdelhakim A A. Preparation and characterization of polyamide-leather wastes polymer composites[J]. Journal of Applied Polymer Science, 2010, 118(1): 446-451.
[6]  刘捷, 聂磊, 汤克勇. SiO2胶原水解物-聚乙烯醇杂化复合膜的制备与性能[J]. 复合材料学报, 2011, 28(2): 59-63. Liu Jie, Nie Lei, Tang Keyong. Preparation and properties of SiO2/collagen hydrolysate poly (vinyl alcohol) hybrid composite films[J]. Acta Materiae Compositae Sinica, 2011, 28(2): 59-63.
[7]  中国国家标准化管理委员会. GB/T 1040.2-2006 塑料拉伸性能的测定第2部分: 模塑和挤出塑料的试验条件[S]. 北京: 中国标准出版社, 2006. Standardization Administration of the People's Republic of China. GB/T 1040.2-2006 Plastic the measurement of tensile properties part 2: molding and extrusion plastic test conditions[S]. Beijing: Standards Press of China, 2006.
[8]  中国国家标准化管理委员会. GB/T 1043.1-2008 塑料简支梁冲击性能的测定第1部分: 非仪器化冲击试验[S]. 北京: 中国标准出版社, 2006. Standardization Administration of the People's Republic of China. GB/T 1043.1-2008 Plastic the impact properties of simply supported beam part 1: the uninstrumented impact test[S]. Beijing: Standards Press of China, 2006.
[9]  Wunderlich B, Cormier C M. Heat of fusion of polyethylene[J]. Journal of Polymer Science Part A-2: Polymer Physics, 1967, 5(5): 987-988.
[10]  解云川, 张乾, 范晓东, 等. 差示扫描量热法测定聚乙烯结晶度的不确定度评定[J]. 化学计量分析, 2003, 12(4): 7-9. Xie Yunchuan, Zhang Qian, Fan Xiaodong, et al. Uncertain evaluation of polyethylene crystallinity measured by DSC[J]. Chemical Analysis and Meterage, 2003, 12(4): 7-9.
[11]  Dasc?lu M C, Vasile C, Silvestre C, et al. On the compatibility of low density polyethylene/hydrolyzed collagen blends. II: New compatibilizers[J]. European Polymer Journal, 2005, 41(6): 1391-1402.
[12]  Nwabunma D, Kyu T, Polyolefin blends[M]. Hoboken: John Wiley & Sons, Inc., 2007: 1-40.
[13]  Pracella M, Haque M M U, Alvarez V. Functionalization, compatibilization and properties of polyolefin composites with natural fibers[J]. Polymers, 2010, 2(4): 554-574.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133