|
- 2015
TiO2-GO的制备及TiO2-GO/环氧树脂涂层的抗腐蚀性能
|
Abstract:
为了提高环氧树脂涂层的抗腐蚀性能, 首先, 利用改进的Hummers法制备了氧化石墨烯(GO)。然后, 将3-氨基丙基三乙氧基硅烷(KH550)改性纳米TiO2负载在GO表面, 制备了改性纳米TiO2与GO的复合颗粒(TiO2-GO), 通过FTIR、XRD和SEM对TiO2-GO进行了表征。最后, 将TiO2-GO分散于环氧树脂中, 分别制备出TiO2-GO含量为1wt%、2wt%和3wt%的TiO2-GO/环氧树脂涂层及纯环氧树脂涂层, 通过SEM观察了涂层断面形貌, 利用电化学工作站和高温高压抗腐蚀测试表征了涂层的防腐蚀性能。结果表明:纳米TiO2通过化学键与GO结合在一起, 将TiO2-GO分散于环氧树脂涂层中可以显著提高环氧树脂涂层的抗腐蚀性能。研究为通过添加GO的方法改善环氧树脂涂层的防腐性能提供了参考。 In order to enhance the anti-corrosion performances of epoxy coatings, first, graphene oxide (GO) was prepared by modified Hummers method. Then, by loading 3-aminopropyltriethoxysilane (KH550) modified nano-TiO2 on the surface of GO, composite particles of modified nano-TiO2 and GO (TiO2-GO) were prepared, and TiO2-GO were characterized by FTIR, XRD and SEM. Finally, the TiO2-GO were dispersed in epoxy, and TiO2-GO/epoxy coatings whose TiO2-GO contents were 1wt%, 2wt% and 3wt% and pure epoxy coatings were fabricated, respectively. The fracture surface morphologies of coatings were observed by SEM, and the anti-corrosion performances of coatings were characterized by electrochemical workstation and high temperature and high pressure corrosion test. The results demonstrate that nano-TiO2 connects with GO by chemical bond, and dispersing TiO2-GO in epoxy coating can evidently enhance the anti-corrosion performances of epoxy coatings. The research provides references for improving the anti-corrosion performances of epoxy coatings by means of adding GO. 四川省应用基础研究计划(V200801)
[1] | Mallakpour S, Barati A. Efficient preparation of hybrid nanocomposite coatings based on poly(vinyl alcohol) and silane coupling agent modified TiO2 nanoparticles[J]. Progress in Organic Coatings, 2011, 71(4): 391-398. |
[2] | Wang C, Mao H, Wang C, et al. Dispersibility and hydrophobicity analysis of titanium dioxide nanoparticles grafted with silane coupling agent[J]. Industrial & Engineering Chemistry Research, 2011, 50(21): 11930-11934. |
[3] | Chen W, Yan L, Bangal P R. Preparation of graphene by the rapid and mild thermal reduction of graphene oxide induced by microwaves[J]. Carbon, 2010, 48(4): 1146-1152. |
[4] | National Energy Administration. SY/T 0544—2010 Specification of internal coating for petroleum drill pipes[S]. Beijing: Petroleum Industry Press, 2010 (in Chinese). 国家能源局. SY/T 0544—2010 石油钻杆内涂层技术条件[S]. 北京: 石油工业出版社, 2010. |
[5] | Lin Y, Jin J, Song M. Preparation and characterisation of covalent polymer functionalized graphene oxide[J]. Journal of Materials Chemistry, 2011, 21(10): 3455-3461. |
[6] | He F, Fan J, Ma D, et al. The attachment of Fe3O4 nanoparticles to graphene oxide by covalent bonding[J]. Carbon, 2010, 48(11): 3139-3144. |
[7] | Yusoff N, Huang N M, Muhamad M R, et al. Hydrothermal synthesis of CuO/functionalized graphene nanocomposites for dye degradation[J]. Materials Letters, 2013, 93: 393-396. |
[8] | Feng H, Wang X, Wu D. Fabrication of spirocyclic phosphazene epoxy-based nanocomposites with graphene via exfoliation of graphite platelets and thermal curing for enhancement of mechanical and conductive properties[J]. Industrial & Engineering Chemistry Research, 2013, 52(30): 10160-10171. |
[9] | Prolongo S G, Jiménez-Suárez A, Moriche R, et al. Graphene nanoplatelets thickness and lateral size influence on the morphology and behavior of epoxy composites[J]. European Polymer Journal, 2014, 53: 292-301. |
[10] | Chang K, Hsu M, Lu H, et al. Room-temperature cured hydrophobic epoxy/graphene composites as corrosion inhibitor for cold-rolled steel[J]. Carbon, 2014, 66: 144-153. |
[11] | Liu J G, Gong G P, Yan C W. EIS study of corrosion behaviour of organic coating/Dacromet composite systems[J]. Electrochimica Acta, 2005, 50(16-17): 3320-3332. |
[12] | Shreepathi S, Naik S M, Vattipalli M R. Water transportation through organic coatings: Correlation between electrochemical impedance measurements, gravimetry, and water vapor permeability[J]. Journal of Coatings Technology and Research, 2012, 9(4): 411-422. |
[13] | He Y, Chen C L, Luo Z, et al. Preparation of TiO2-MWCNTs and properties of TiO2-MWCNTs/epoxy composite epoxy coatings[J]. Acta Materiae Compositae Sinica, 2014, 31(2): 429-435 (in Chinese). 何毅, 陈春林, 罗智, 等. TiO2-MWCNTs的制备及TiO2-MWCNTs/epoxy复合涂层性能[J]. 复合材料学报, 2014, 31(2): 429-435. |
[14] | Zhu C, Xie R, Xue J, et al. Studies of the impedance models and water transport behaviors of cathodically polarized coating[J]. Electrochimica Acta, 2011, 56(16): 5828-5835. |
[15] | Guo H, Wang X, Qian Q, et al. A green approach to the synthesis of graphene nanosheets[J]. ACS Nano, 2009, 3(9): 2653-2659. |
[16] | Botas C, álvarez P, Blanco P, et al. Graphene materials with different structures prepared from the same graphite by the Hummers and Brodie methods[J]. Carbon, 2013, 65: 156-164. |
[17] | Cao Y, Feng J, Wu P. Preparation of organically dispersible graphene nanosheet powders through a lyophilization method and their poly(lactic acid) composites[J]. Carbon, 2010, 48(13): 3834-3839. |
[18] | Min Y, Zhang K, Zhao W, et al. Enhanced chemical interaction between TiO2 and graphene oxide for photocatalytic decolorization of methylene blue[J]. Chemical Engineering Journal, 2012, 193-194: 203-210. |
[19] | Jiang G, Lin Z, Chen C, et al. TiO2 nanoparticles assembled on graphene oxide nanosheets with high photocatalytic activity for removal of pollutants[J]. Carbon, 2011, 49(8): 2693-2701. |
[20] | Wan Y, Tang L, Gong L, et al. Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties[J]. Carbon, 2014, 69: 467-480. |
[21] | Wei B J, Xiao T, Li X J, et al. Preparation and properties of graphene and MWCNTs reinforced epoxy resin composites[J]. Acta Materiae Compositae Sinica, 2012, 29(5): 53-60 (in Chinese). 卫保娟, 肖潭, 李雄俊, 等. 石墨烯与多壁碳纳米管增强环氧树脂复合材料的制备及性能[J]. 复合材料学报, 2012, 29(5): 53-60. |
[22] | Huang M R, Yang H J, Li X G. Studies on waterborne polyaniline microlatex and its coating for metal protection[J]. Development and Application of Materials, 2005, 20(2): 28-32 (in Chinese). 黄美荣, 杨海军, 李新贵. 水性聚苯胺微乳液及其防腐涂料研究[J]. 材料开发与应用, 2005, 20(2): 28-32. |