LAN MAN Standards Committee of IEEE Computer Society. IEEE standard for wireless LAN medium access con- trol (MAC) and physical layer (PHY) specifications [S]. New York: , 1999: 72-86.
[2]
Bensaou B, Wang Y, Ko C C. Fair medium access in 802.11 based wireless Ad hoc network //MOBIHOC 2000. Massachusetts: IEEE Press, 2000: 99-106.
[3]
Jian Y, Chen S G. Can CSMA/CA networks be made fair? //MOBICOM 2008. California: IEEE Press, 2008: 235-246.
[4]
董超, 陈贵海, 王海. 无线Mesh网络QoS研究进展 [J]. 软件学报, 2009, 20(6): 1539-1552. Dong C, Chen G H, Wang H. Research of QoS on wireless Mesh networks [J]. Journal of Software, 2009, 20(6): 1539-1552.
[5]
Qian Z, Qin Z Y. Cross-layer design for QoS support in multihop wireless networks [J]. Proceedings of the IEEE, 2008, 96(1): 64-76.
[6]
Chen S, Zhang Z. Localized algorithm for aggregate fairness in wireless sensor networks //MOBICOM 2006. California: IEEE Press, 2006: 274-285.
[7]
Wang X, Kar K. Throughput modeling and fairness issues in CSMA/CA based Ad hoc networks //INFOCOM 2005. Miami: IEEE Press, 2005: 23-34.
[8]
滕达, 杨寿保, 孙伟峰, 等. 车载网络中提高公平性的数据包大小自适应调节方案[J]. 电子学报, 2007, 35(8): 1521-1526. Teng D, Yang S B, Sun W F, et al. An adaptive packet-size adjusting scheme for improving fairness in vehicle networks[J]. Journal of Electronics, 2007, 35(8): 1521-1526.
[9]
Koksal C M, Kassab H, Balakrishnan H. An analysis of short-term fairness in wireless media access protocols //SIGMETRICS 2000. Santa Clara: IEEE Press, 2000: 118-119.
[10]
Bottigliengo M, Casetti C, Chiasserini C F, et al. Short-term faireness for TCP flows in 802.11b WLANs //INFOCOM 2004. Hong Kong: IEEE Press, 2004: 1383-1392.
[11]
Lin K, Kushman N, Katabi D. ZipTx: harnessing partial packets in 802.11 networks //MobiCom 2008. California: IEEE Press, 2008: 351-362.
[12]
Hui P, Chaintreau A, Scott J, et al. Packet switched networks and human mobility in conference environments //SIGCOMM 2005. Philadelphia: IEEE Press, 2005: 244-255.
[13]
Fall K. A delay-tolerant network architecture for challenged internet. : Intel Corporation, 2003.
