付铁, 李金泉, 杨向东, 等. 新型码垛机械手的动态载荷计算与选型[J]. 北京理工大学报, 2008, 28(1): 24-28. Fu Tie, Li Jinquan, Yang Xiangdong, et al. Dynamic computation and type-selection design of palletizing manipulator [J]. Transactions of Beijing Institute of Technology, 2008, 28(1): 24-28.
[2]
冯志友, 李永刚, 张策, 等. 并联机器人运动与动力分析研究现状及展望[J]. 中国机械工程, 2006, 17(9): 979-984. Feng Zhiyou, Li Yonggang, Zhang Ce, et al. Present state and perspectives of research on kinematics and dynamics of parallel manipulators[J]. China Mechanical Engineering, 2006, 17(9): 979-984.
[3]
袁泉. 喷浆机器人的工作空间分析[J]. 机械科学与技术, 2001, 20(1): 62-63. Yuan Quan. An analysis of the work-space of a spray robot [J]. Mechanical Science and Technology, 2001, 20(1): 62-63.
[4]
曹永刚, 张玉茹, 马运忠. 6RSS-型并联机构的工作空间分析和参数优化[J]. 机械工程学报, 2008, 44(1): 19-23. Cao Yonggang, Zhang Yuru, Ma Yunzhong. Workspace analysis and parameteroptimization of 6-RSS parallel mechanism[J]. Chinese Journal of Mechanical Engineering, 2008, 44(1): 19-23.
[5]
曹毅, 李秀娟, 宁祎, 等. 三维机器人工作空间及几何误差分析[J]. 机械科学与技术, 2006, 25(12): 979-984. Cao Yi, Li Xiujuan, Ning Wei, et al. Computation and geometrical error analysis of a 3D robot’s workspace[J]. Mechanical Since and Technology, 2006, 25(12): 979-984.
[6]
Bonev I A, Gosselin C M. Geometric algorithms for the computation of the constant-orientation workspace and singularity surfaces of a special 6-RUS parallel manipulator//Proceedings of DETC’2002 ASME. Montreal: ASME, 2002: 1-10.
[7]
刘辛军, 张立杰, 高峰. 基于AutoCAD平台的六自由度并联机器人位置工作空间的解析求解方法[J]. 机器人, 2000, 22(6): 457-465. Liu Xinjun, Zhang Lijie, Gao Feng. Geometrical determination of workspace for 6-DOF parallel manipulators based on AutoCAD platform [J]. Robot, 2000, 22(6): 457-465.
