全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
测绘学报  2015 

多尺度点云噪声检测的密度分析法

DOI: 10.11947/j.AGCS.2015.20130423, PP. 282-291

Keywords: 噪声检测,点云数据,多尺度,LiDAR,影像匹配

Full-Text   Cite this paper   Add to My Lib

Abstract:

当前机载激光雷达数据和影像匹配得到的点云是密集点云数据的两类主要来源,但都不可避免存在着噪声点.本文提出一种新的点云去噪算法,可适用于这两类数据中所包含的噪声点的去除.算法主要包括两步第1步利用多尺度的密度算法去除孤立噪声和小的簇状噪声;第2步利用三角网约束将第1步中误检测为噪声的点重新归为正常点.针对真实数据进行了剔噪试验,结果表明本文提出的基于密度分析的多尺度噪声检测算法对孤立噪声和簇状噪声都有较为效,且对于质量较差的影像匹配点云的检测也能有效处理.本文算法检测率达到97%以上.

References

[1]  AXELSSON P. DEM Generation from Laser Scanner Data Using Adaptive TIN Models[C]//Proceedings of International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Amsterdam: [s.n.], 2000: 110-117.
[2]  SUI Lichun,YANG Yun. Filtering of Airborne LiDAR Point Cloud Data Based on car(p,q) Model and Mathematical Morphology[J]. Acta Geodaetica et Cartographica Sinica, 2012,41(2): 219-224. (隋立春,杨耕. 基于car(p,q)模型和数学形态学理论的LiDAR点云数据滤波[J]. 测绘学报, 2012, 41(2): 219-224.)
[3]  SUI Lichun, ZHANG Yibin, LIU Yan, et al.Filtering of Airborne LiDAR Point Cloud Data Based on Adaptive Mathematical Morphology[J]. Acta Geodaetica et Cartographica Sinica, 2010, 39(4); 390-396. (隋立春,张熠斌,柳艳, 等. 基于改进的数学形态学算法的LiDAR点云数据滤波[J]. 测绘学报, 2010, 39(4): 390-396.)
[4]  ZHANG Yi, YAN Li. 3D Diffusion Filtering Method of Intensity Noise for Terrestrial Laser Scanning Point Cloud[J]. Acta Geodaetica et Cartographica Sinica, 2013, 42(4): 568-573. (张毅,闫利. 地面激光点云强度噪声的三维扩散滤波方法[J].测绘学报, 2010, 39(4); 219-224.)
[5]  CHENG Liang, GONG Jianya. Building Boundary Extraction Using Very High Resolution Images and LiDAR[J]. Acta Geodaetica et Cartographica Sinica, 2008, 37(3):391-393. (程亮,龚健雅. LiDAR辅助下利用超高分辨率影像提取建筑物轮廓方法[J]. 测绘学报, 2008, 37(3): 391-393.)
[6]  HASLER D, SBAIZ L, SVSSTRUNK S, et al. Outlier Modeling in Image Matching[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 2003, 25(3): 301-315.
[7]  SITHOLE G, VOSSELMAN G. Experimental Comparison of Filter Algorithms for Bare-Earth Extraction from Airborne Laser Scanning Point Clouds[J]. ISPRS Journal of Photogrammetry and Remote Sensing, 2004, 59 (1-2): 85-101.
[8]  ZUO Zhiquan, ZHANG Zuxun, ZHANG Jianqing. Noise Removal Algorithm of LIDAR Point Clouds Based on 3D Finite-element[J]. Journal of Remote Sensing, 2012, 16(2): 297-309.(左志权,张祖勋,张剑清.三维有限元分析的LIDAR点云噪声剔除算法[J].遥感学报,2012, 16(2): 297-309.)
[9]  HAN Wenjun,ZUO Zhiquan. Noise Removing Algorithm of LiDAR Point Clouds Based on TIN Smoothing Rules[J]. Journal of Surveying and Mapping, 2012, 37(6): 153-154. (韩文军,左志权. 基于三角网光滑规则的LiDAR 点云噪声剔除算法[J]. 测绘科学, 2012, 37(6): 153-154.)
[10]  SILVáN-CáRDENAS J L, WANG L. A Multi-resolution Approach for Filtering LiDAR Altimetry Data[J]. ISPRS Journal of Photogrammetry and Remote Sensing, 2006, 61(1): 11-22.
[11]  MENG X, WANG L, SILVáN-CáRDENAS J L, et al. A Multidirectional Ground Filtering Algorithm for Airborne LiDAR[J]. ISPRS Journal of Photogrammetry and Remote Sensing, 2009, 64(1): 117-124.
[12]  ZHANG K Q, CHEN S, WHITMAN D, et al. A Progressive Morphological Filter for Removing Nonground Measurements from Airborne LiDAR Data[J]. IEEE Transactions on Geoscience and Remote Sensing, 2003, 41(4): 872-882.
[13]  MONGUS D, ZALIK B. Parameter-free Ground Filtering of LiDAR Data for Automatic DTM Generation[J]. ISPRS Journal of Photogrammetry and Remote Sensing, 2012, 67: 1-12.
[14]  KOBLER A, PFEIFER N, OGRINC P, et al. Repetitive Interpolation: A Robust Algorithm for DTM Generation from Aerial Laser Scanner Data in Forested Terrain[J]. Remote Sensing of Environment, 2007, 108(1): 9-23.
[15]  SOTOODEH S. Outlier Detection in Laser Scanner Point Clouds[C]//Proceedings of the ISPRS Commission V Symposium, Image Engineering and Vision Metrology, Commission V: 36. Dresden: ISPRS, 2006: 297-302.
[16]  SOTOODEH S. Hierarchical Clustered Outlier Detection in Laser Scanner Point Clouds[C]//Proceedings of ISPRS Commission V Symposium Image Enginerring and Vision Metrology. Deresden: ISPRS, 2007: 383-387.
[17]  ALMEIDA J A S, BARBOSA L M S, PAIS A, et al. Improving Hierarchical Cluster Analysis: A New Method with Outlier Detection and Automatic Clustering[J]. Chemometrics and Intelligent Laboratory Systems, 2007, 87(2): 208-217.
[18]  DESBRUN M, MEYER M, SCHROBDER P, et al. Implicit Fairing of Irregular Meshes Using Diffusion and Curvature Flow[C]//Proceedings of the 26th Annual Conference on Computer Graphics and Interactive Techniques. Los Angeles: [s.n.], 1999: 317-324.
[19]  BAJAJ C L, XU G. Anisotropic Diffusion of Surfaces and Functions on Surfaces[J]. ACM Transactions on Graphics, 2003, 22(1): 4-32.
[20]  CLARENZ U, DIEWALD U, RUMPF M. Anisotropic Geometric Diffusion in Surface Processing[C]//Proceedings of IEEE Visualization 2000. Salt Lake City: IEEE, 2000: 397-412.
[21]  YE Aifen, GONG Shengrong, WANG Zhaohui, et al. Point Cloud Density Extraction Based on Stochastic Distribution Estimation[J]. Computer Engineering, 2009, 35(4): 183-186. (叶爱芬,龚声蓉,王朝晖,等.基于随机分布估计的点云密度提取[J]. 计算机工程, 2009, 35(4): 183-186.)
[22]  PATEL J K, READ C B. Handbook of the Normal Distribution[M]. 2nd ed. London: CRC Press, 1996.
[23]  MANN P S. Introductory Statistics[M]. 7th ed. New York: John Wiley and Sons Inc, 2010.
[24]  PCL. Point Cloud Library(PCL) Module Filters[EB/OL]. [2013-06-12]. http://docs.pointclouds. org/trunk/group_filters.html.
[25]  ISPRS. ISPRS Test on Extracting DEMS from Point Clouds: A Comparison of Existing Automatic Filters[EB/OL].2006[2013-08-06]. http://www.itc.nl/isprswgiii-3/filtertest.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133