Today is the golden age of fashion. Fashion garments and apparels have been used everywhere to cope with the fashion era. These fashion garments and apparels are made of the fabrics of various structures and components through various processes. Among them gabardine is one of the most remarkable type of fabric and apparel dyeing is the latest process used for fashion apparel. From this research, the seam strength variations between dyed and un-dyed gabardine apparels after conceding the garment dyeing process can be known. It is a comparative research work which will deliver very effective knowledge about various types of seam, seam strength and seam performance. For comparative study, many dummy apparels body have been produced as samples which are dyed in Hams washing and dyeing limited. After that all samples have tested in Thermax woven dyeing laboratory. Since Bangladesh is a very potential fashion market and the fashion garments are being manufactured more and more. Hence the fashion trend is rapidly going to garments dyeing from conventional fabric/yarn dyeing processes. Gradually garments dyeing order are increasing higher to higher.
References
[1]
Kothari, V.K. (1999) Testing and Quality Management. IAFL Publications, New Delhi.
[2]
Anderson, K. (2009) Selecting the Correct Sewing Thread. 1-5. www.techexchange.com
[3]
Standard: ISO 4915:1991. Textiles, Stitch Guide.
[4]
Standard Practice for Stitch and Seam1. Designation: D 6193-97 (Reapproved 2004), ASTM international.
[5]
Kordoghli, B., Cheikhrouhou, M. and Saidene, C.K. (2009) Mechanica of Seams on Treated Fabrics. Autex Research Journal, 9, 87. http://www.autexrj.org/No3-2009/87 .
[6]
Bharani, M., Shiyamaladevi, P.S.S. and Mahendra Gowda, R.V. (2012) Characterization of Seam Strength and Seam Slippage on Cotton Fabric with Woven Structures and Finish. Research Journal of Engineering Sciences, 1, 41-50.
[7]
Kornfel, L.L. (1952) A Study of the Fundamental Factors That Affect Seam Strength. Georgia Institute of Technology, Atlanta.
[8]
Seetharam, G. and Nagarajan, L. (2014) Evaluation of Sewing Performance of Plain Twill and Satin Fabrics Based on Seam Slippage Seam Strength and Seam Efficiency. Journal of Polymer and Textile Engineering, 1, 9-21.
[9]
Carr, H. and Latham, B. (1995) The Technology of Clothing Manufacturing. Blackwell Scientific Publications, Oxford.
Behera, B.K. and Sharma, S. (1998) Low Stress Behavior and Sewability of Suiting and Shirting Fabrics. Indian Journal of Fiber and Textile Research, 23, 233-241.
[12]
Choudhury, P.K. (2000) Improvement in Seam Performance of Jute Bags. Indian Journal of Fiber and Textile Resear- ch, 25, 206-210.
[13]
Gribaa, S., Amar, S.B. and Dogui, A. (2006) Influence of Sewing Parameters, upon the Tensile Behavior of Textile Assembly. International Journal of Clothing Science and Technology, 18, 235-246.
http://dx.doi.org/10.1108/09556220610668581
[14]
http://angelasancartier.net/gabardine
[15]
(2014) Coats Sewing Solution; Seam types. Bulletin Post.
[16]
(2014) Coats Sewing Solution; Sewing Post Dyed Garments. Bulletin Post.
[17]
Chakraborty, J.N., Rudrajit, P. and Megha, P.R. (2005) Garment Dyeing. Indian Journal of Fibre & Textile Research, 30, 468-476.
