A Combined Discrete Event—Agent Based Approach to Modeling Tensile Strength of One-Dimensional Fibrous Materials. Face Validation and Effect of the Basic Model Parameters
A combined method of discrete event and agent based modelling has been applied to the computer modelling and simulation of the tensile strength of one-dimensional fibrous materials (ODFM). This combined method is based on the concept of discrete event simulation as being applied to the modeling of the structure of the fiber flow and on the concept of agent based modelling for modelling and simulation of the fiber interaction within the structure of the fibrous material. Frictional and traction forces arise as the result of this fiber interaction. A model of the ODFM tensile strength, which is based on the slippage effect, is created and studied in this research. Only frictional and traction forces determine the tensile strength in this kind of the model. The article examines the validation problem of the slippage effect based tensile strength model and questions regarding the strength potential estimation through variation in the parameters of the model.
References
[1]
Xie, Y.O. (1986) A Study of the Strength of Wrapped Yarns. Part III: The Relationship between Structural Parameters and Strength. Journal of the Textile Institute, 5, 314-326.
[2]
Ghosh, A.I. (2005) Predictive Models for Strength of Spun Yarns: An Overview. Autex Research Journal, 5, 20-29.
[3]
Furferi, R. and Gelli, M. (2010) Yarn Strength Prediction: A Practical Model Based on Artificial Neural Networks. Advances in Mechanical Engineering, 2010, Article ID: 640103.
[4]
Majumbar, A. (2008) Yarn Strength Modeling Using Fuzzy Expert System. Journal of Engineered Fibers and Fabrics, 3, 61-68.
[5]
Hearle, J.G., Grosberg, P. and Backer, S. (1969) Structural Mechanics of Fibers, Yarns and Fabrics. Wiley-Interscience, New York, 482.
[6]
Sullivan, R.R. (1942) A Theoretical Approach to the Problem of Yarn Strength. Journal of Applied Physics, 13, 157- 167. http://dx.doi.org/10.1063/1.1714849
[7]
Grossberg, P. (1966) The Strength of Slivers of Relatively Low Twist. Journal of the Textile Institute Transactions, 57, T15-T23. http://dx.doi.org/10.1080/19447026608662332
[8]
Koo, H.S. (2001) Variance Tolerancing and Decomposition in Short-Staple Spinning Process. Part 1: Modeling Spun Yarn Strength through Intrinsic Components. Textile Research Journal, 71, 1-7.
[9]
Wang, Y.S. (2001) Digital-Element Simulation of Textile Processes. Composites Science and Technology, 61, 311-319.
http://dx.doi.org/10.1016/S0266-3538(00)00223-2
[10]
Vas, L.H. (1994) Modelling the Breaking Process of Twisted Fibre Bundles and Yarns. Periodica Polytechnica, Ser. Mechanical Engineering, 38, 325-350.
[11]
Phoenix, S.L. (1979) Statistical Theory for the Strength of Twisted Fiber Bundles with Applications to Yarns and Cables. Textile Research Journal, 49, 407-423. http://dx.doi.org/10.1177/004051757904900708
[12]
Djaja, R.M. (1992) Finite Element Modelling for an Oriented Assembly of Continuous Fibers. Textile Research Journal, 62, 445-457.
[13]
Keefe, M. (1994) Solid Modeling Applied to Fibrous Assemblies. Part 1: Twisted Yarn. Textile Research Journal, 85, 338-349. http://dx.doi.org/10.1080/00405009408631278
[14]
Langenhove, L. (1997) Simulating the Mechanical Properties of a Yarn Based on the Properties and Arrangement of Its Fibers. Part 1: The Finite Element Model. Textile Research Journal, 67, 263-268.
[15]
Morris, P.M. (1999) Modelling of Yarn Properties from Fiber Properties. Journal of the Textile Institute, 90, 322-335.
[16]
Porwal, P.B. (2007) Statistical Strength of Twisted Fiber Bundles with Load Sharing Controlled by Frictional Length Scales. Journal of Mechanics of Materials and Structures, 2, 773-791. http://dx.doi.org/10.2140/jomms.2007.2.773
[17]
Siewe, F.G. (2009) An Application of Queuing Theory to Modeling of Melange Yarns. Part 1: A Queuing Model of Melange Yarn Structure. Textile Research Journal, 79, 1467-1485. http://dx.doi.org/10.1177/0040517508095593
[18]
Pan, N. (1998) Investigation on the Strength-Size Relationship in Fibrous Structures Including Composites. Journal of Materials Science, 33, 2667-2672. http://dx.doi.org/10.1023/A:1004325907536
[19]
Vishwanath, B.V., Vernekar, S. and Ghosh, B (1999) Effect of Fiber Friction on Yarn Properties. Man-Made Text India, 7, 267-271.
[20]
Das, A., Ishtiaque, S.M. and Parida, J.R. (2005) Effect of Fiber Friction, Yarn Twist, and Splicing Air Pressure on Yarn Splicing Performance. Fibers and Polymers, 6, 72-78. http://dx.doi.org/10.1007/BF02875576
[21]
Cherkassky, A. and Bumagin, E. (2014) A Combined Discrete Event—Agent Based Approach to Modeling Tensile Strength of One-Dimensional Fibrous Materials. Part 1: Simulation Algorithm on the Base of the Fiber Slippage Effect. Journal of Engineered Fibers and Fabrics, 9, 1-15.
[22]
Law, A.K. and Kelton, W.D. (2000) Simulation Modeling and Analysis. 3rd Edition, McGraw-Hill, Singapore, 760.
[23]
Borshchev, A. (2013) The Big Book of Simulation Modeling. AnyLogic, America, 612.
[24]
Van Dam, K.H., Nikolic, I. and Lukszo, Z. (2013) Agent-Based Modelling of Socio-Technical Systems. Springer, Berlin, 267.
[25]
Allen, T.T. (2011) Introduction to Discrete Event Simulation and Agent-Based Modeling: Voting Systems, Health Care, Military, and Manufacturing. Springer, London, 215. http://dx.doi.org/10.1007/978-0-85729-139-4
[26]
Cherkassky, A. (2010) Neural Network Meta-Model of the Fibrous Materials Based on Discrete-Event Simulation. Part 1: Discrete-Event Simulation Model of the One-Dimensional Fibrous Material. Journal of The Textile Institute, 102, 442-454. http://dx.doi.org/10.1080/00405000.2010.488078
[27]
Das, B.R., Ishtiaque, S.M. and Rengasamy, R.S. (2010) Failure Mechanism of Staple Yarns: A Critical Review. Journal of Textile and Apparel, Technology and Management, 6, 1-10.
[28]
Ishtiaque, S.M.., Das, B.R.., Kumar, A. and Ramamoorthy, M. (2008) Static and Dynamic Failure Mechanisms of Cotton Yarns. Indian Journal of Fibre Textile Research, 33, 111-118.
American Society for Testing and Materials (ASTM) Standard (2006) Standard Test Method for Breaking Force and Elongation of Textile Fabrics. ASTM D, 5035-06, 274-279.
[31]
Evans, M.H. (2010) Triangular Distribution. In: Forbes, C., Evans, M., Hasting, N., et al., Eds., Statistical Distributions, 4th Edition, Wiley, New York, 210.
[32]
Brand, R.H. (1970) Measurement of Three-Dimensional Fiber Crimp. Textile Research Journal, 40, 169-177.
http://dx.doi.org/10.1177/004051757004000210
[33]
American Society for Testing and Materials (ASTM) Standard (2012) Standard Test Method for Crimp Frequency of Manufactured Staple Fibers, ASTM D, 3937-12, 256-259.
[34]
Sabin, P. (2014) Simulating War. Bloomsbury, London, New Delhi, New York and Sydney, 363.
[35]
Sreprateep, K.B. (2006) Computer Aids Modeling of Fiber Assemblies. Computer-Aided Design and Applications, 3, 367-376. http://dx.doi.org/10.1080/16864360.2006.10738475
