The response to stress delivered by a non-isochoric hollow cylinder is
critical to its future life and integrity. The design of cylinders must
emphasize durability; therefore, the knowledge of the yield stress of the
constituent material is essential. The stress component of a pressurized
compressible circular cylinder made of non-linearly elastic material was
considered here and the yield stress was determined.
References
[1]
Ayob, A.B., Tamin, M.N. and Elbasheer, M.K. (2009) Pressure
Limits of Thick-Walled
Cylinders. Proceedings of the International Multi-Conference
of Engineers
and Computer Scientists 2009, Vol. II
IMECS, 18-20 March 2009.
[2]
Wang, Z. (1995) Elastic-Plastic Fracture Analysis of a Thick-Walled
Cylinder. International Journal of Pressure Vessels
and Piping, 63, 165-168. http://dx.doi.org/10.1016/0308-0161(94)00048-N
[3]
Chaaban, A. and Barake, N. (1993) Elasto-Plastic Analysis of High Pressure Vessels
with Radial Cross Bores. High
Pressure Technology, 263, 67-123.
[4]
Blatz, P.D. and Ko, W.L. (1962) Application of Finite Elasticity to the Deformation
of Rubbery Materials. Transactions
of the Society of Rheology, 6, 223-251. http://dx.doi.org/10.1122/1.548937
[5]
Chung, D.T., Horgan, C.O. and Abeyaratne, R. (1986) The Finite Deformation of Internally Pressurized
Hollow Cylinders and Spheres for a Class of Compressible Elastic Materials. International Journal of Solids and Structures, 22, 1557-1570. http://dx.doi.org/10.1016/0020-7683(86)90062-4
[6]
Hills, J.M. and
Arrigo, D.J. (1996)
On Axially Symmetric Deformation of Perfectly Elastic Compressible Material. Quarterly Journal of Mechanics Applied
Mathematics, 49, 19-28. http://dx.doi.org/10.1093/qjmam/49.1.19
[7]
Perry, T.
and Aboudi, J. (2003)
Elastic-Plastic Stresses in Thick-Walled Cylinders. Journal of Pressure Vessel Technology, 125, 248. http://dx.doi.org/10.1115/1.1593078
[8]
Zhao,
W., Seshadri, R. and Dubey, R.N. (2003) On Thick-Walled Cylinder under Internal
Pressure. Journal of Pressure Vessel Technology, 125, 267-273. http://dx.doi.org/10.1115/1.1593082
[9]
Ejike, U.B.C.O.
and Erumaka,
E.N. (2006)
Finite Deformation of Rotating Circular Cylinder of Blatz-Ko Material. Journal of Mathematical Sciences, 17, 63-71.
[10]
Nzerem, F.E. (2007)
The Component of Stress on an Internally Pressurized Circular Cylinder of the
Blatz-Ko Material. Research
Journal of Applied Sciences, 2, 420-423.
[11]
Nzerem,
F.E. (2007)
Stresses Resulting from Fluid Flow in Pipes. M.Sc. Thesis, Federal University of Technology, Owerri.
