The location and nature of the moisture leakages are sometimes difficult to detect. Moreover, the
relation between observed inside surface moisture patterns and where the moisture enters the
construction is often not clear. The objective of this paper is to investigate inverse modeling techniques
as a tool for the detection of moisture leakage locations in building constructions from inside
surface moisture patterns. It is concluded that although the presented methodology is promising,
more research is needed to confirm its usability.
References
[1]
Briggen, P.M. (2007) A Study on the Moisture Problems at Hunting Lodge St. Hubertus. M.Sc. Thesis, Technische Universiteit Eindhoven, Eindhoven, 120 p. (In Dutch)
[2]
Briggen, P.M., Blocken, B.J.E., van Schijndel, A.W.M. and Schellen, H.L. (2009) Wind-Driven Rain and Related Moisture Problems at the Tower of a Monumental Building. 4th International Building Physics Conference, 15-18 June 2009, Istanbul, 709-716.
[3]
Briggen, P.M., Blocken, B.J.E. and Schellen, H.L. (2009) Wind-Driven Rain on the Facade of a Monumental Tower: Numerical Simulation, Full-Scale Validation and Sensitivity Analysis. Building and Environment, 44, 1675-1690.
[4]
van Schijndel, A.W.M. (2007) Integrated Heat Air and Moisture Modeling and Simulation. Ph.D. Thesis, Technische Universiteit Eindhoven, Eindhoven, 200 p.
[5]
van Schijndel, A.W.M. (2009) Integrated Modeling of Dynamic Heat, Air and Moisture Processes in Buildings and Systems Using SimuLink and COMSOL. Building Simulation: An International Journal, 2, 143-155.
[6]
van Schijndel, A.W.M. (2009) The Exploration of an Inverse Problem Technique to Obtain Material Properties of a Building Construction. 4th International Building Physics Conference, 15-18 June 2009, Istanbul, 91-98.
