二元不互溶Cr-Mo系高能球磨固溶研究
Research on Solid Solution of Cr-Mo Immiscible Binary System by High-Energy Ball Milling

DOI: 10.12677/MS.2014.44019, PP. 127-133

Keywords: Cr-Mo二元不互溶系，机械合金化，固溶体，热力学
Cr-Mo Immiscible Binary System, Mechanical Alloying, Solid Solution, Thermo-Dynamics

Full-Text   Cite this paper   Add to My Lib

Abstract:

对Cr-62at.%Mo, Cr-35at.%Mo 和 Cr-15at.%Mo三种粉末进行机械合金化，探究粉末合金化过程中的形貌及物相变化。通过对粉末进行扫描电镜和X射线衍射分析发现，三种成份的混合粉末在高能球磨18 h后都实现了Cr、Mo的完全互固溶，形成具有不同固溶度的Cr(Mo)固溶体。根据Miedema模型，热力学计算结果表明：Cr-Mo二元系在平衡状态下不具备形成Cr(Mo)固溶体的热力学驱动力。而球磨过程中储存较多的能量有利于组元越过能垒形成Cr(Mo)固溶体。X射线衍射分析发现，形成的固溶体是置换固溶体。
Morphologies and phase transition of three kinds of powders Cr-62at.%Mo, Cr-35at.%Mo and Cr-15at.%Mo synthesized by mechanical alloying at low-temperature were investigated. The milled powders were examined by scanning electron microscope (SEM) analysis and X-ray diffraction (XRD) phase analysis, respectively. The results showed that three kinds of powders milled for 18 h were composed of the Cr(Mo) solid solution with different solid solubility. Based on the Miedema’s model, the thermodynamic calculation indicated that under the equilibrium-state, Cr-Mo binary system has no thermodynamic driving force for forming Cr(Mo) solid solution. So, the energy barrier for forming Cr(Mo) solid solution could be overcome during mechanical alloying. XRD analyses showed Cr(Mo) solid solution synthesized by high-energy ball milling was sub-stitu- tional solid solution.

References

[1]	罗雯雯 (2012) Ni-Mo及Cr-Mo熔覆层的制备及特性研究. 硕士论文, 华北电力大学, 保定.
[2]	徐晋勇, 唐万兴, 许敏, 杜丽 高原 徐重 (2006) 低碳钢等离子表面冶金Cr-Mo合金层的研究. 兵器材料科学与工程, 2, 23- 25.
[3]	梁勇, 王俊, 佟百运, 等 (1992) Cr-Mo合金激光合金化的组织结构及耐蚀性. 金属学报, 1, 39-44.
[4]	赵灵源, 姚素薇, 小若正伦 (1990) Cr-Mo合金镀层性能研究. 中国腐蚀与防护学报, 2, 151-158.
[5]	Benjamin, J.S. (1970) Dispersion strengthened superalloys by mechanical alloying. Metallurgical Transactions, 8, 2943-2946.
[6]	冉广, 周敬恩, 席生岐, 李鹏亮 (2004) 机械合金化过程中Al-Pb相变的热力学和动力学研究. 金属热处理, 7, 49-52.
[7]	李世波, 谢建新, 陈妹, 赵志毅 (2006) 机械合金化W-Cu固溶体的形成机理. 材料科学与工艺, 4, 424-427.
[8]	陈文革, 丁秉钧, 张晖 (2002) 机械合金化制备的纳米晶电触头材料. 中国有色金属学报, 6, 1224-1228.
[9]	李金平, 罗守靖, 龚朝晖, 等 (2000) Cu-Cr机械合金化工艺的研究. 兵器材料科学与工程, 6, 37-42.
[10]	盛娅峥, 王兴庆, 李俊 (2011) 铌一铝化合物的机械合金化制备及机理. 粉末冶金材料科学与工程, 6, 906-911.
[11]	张琦, 叶菲, 肖巍, 闵捷 孟令娟, 叶卫平, 程旭东 (2010) 机械合金化制备Zn-Ni过饱和固溶体. 稀有金属材料与工程, 1, 186-189.
[12]	Koohkan, R., Sharafi, S., Shokrollahi, H., et al. (2008) Preparation of nanocrystalline Fe-Ni powders by mechanical alloying used in soft magnetic composites. Journal of Magnetism and Magnetic Materials, 320, 1089-1094.
[13]	Xi, S.Q., Zuo, K.S., Li, X.G., et al. (2008) Study on the solid solubility extension of Mo in Cu by mechanical alloying Cu with amorphous Cr(Mo). Acta Material, 56, 6050-6060.
[14]	席生岐, 屈晓燕, 刘心宽, 马明亮, 周敬恩, 王笑天 (2000) 高能球磨固态扩散反应研究. 材料科学与工艺, 3, 88-91.
[15]	陈君平, 施雨湘, 张凡, 韩钰 (2004) 高能球磨中的机械合金化机理. 机械, 3, 52-54.
[16]	谢佑卿, 马柳莺 (1985) 广义Vegard定律和广义余氏定律. 中南矿冶学院学报, 8, 1-10.
[17]	Semiatin, S.L., Lahoti, G. and Jonas, J.J. (1985) ASM metals handbook. ASM, Metals Park, OH.

Full-Text