This paper presents a novel self-timed multi-purpose sensor especially conceived for Field Programmable Gate Arrays (FPGAs). The aim of the sensor is to measure performance variations during the life-cycle of the device, such as process variability, critical path timing and temperature variations. The proposed topology, through the use of both combinational and sequential FPGA elements, amplifies the time of a signal traversing a delay chain to produce a pulse whose width is the sensor’s measurement. The sensor is fully self-timed, avoiding the need for clock distribution networks and eliminating the limitations imposed by the system clock. One single off- or on-chip time-to-digital converter is able to perform digitization of several sensors in a single operation. These features allow for a simplified approach for designers wanting to intertwine a multi-purpose sensor network with their application logic. Employed as a temperature sensor, it has been measured to have an error of？ ±0.67 °C, over the range of 20–100 °C, employing 20 logic elements with a 2-point calibration.
References
[1]
Ghosh, S.; Roy, K. Parameter variation tolerance and error resiliency: New design paradigm for the nanoscale era. Proc. IEEE 2010.
[2]
Zick, K.M.; Hayes, J.P. Low-cost sensing with ring oscillator arrays for healthier reconfigurable systems. ACM Trans. Reconfigurable Technol. Syst. 2012, 5, doi:10.1145/2133352.2133353.
[3]
Ituero, P.; Lopez-Vallejo, M.; Marcos, M.; Osuna, C. Light-weight on-chip monitoring network for dynamic adaptation and calibration. Sens. J. IEEE 2012, 12, 1736–1745.
Kumar, A. CAD Techniques for Robust FPGA Design Under Variability. Ph.D Thesis, University of Waterloo, Ontario, Canada, 1 September 2010.
[6]
Chen, P.; Shie, M.C.; Zheng, Z.Y.; Zheng, Z.F.; Chu, C.Y. A fully digital time-domain smart temperature sensor realized with 140 FPGA logic elements. In Circuits Syst. I Regul. Pap. IEEE Trans.; 2007; Volume 54, pp. 2661–2668.
[7]
Zick, K.M.; Hayes, J.P. On-Line Sensing for Healthier FPGA Systems. Proceedings of the 18th Annual ACM/SIGDA International Symposium on Field Programmable Gate Arrays, Association for Computing Machinery (ACM), New York, NY, USA; 2010; pp. 239–248.
[8]
Franco, J.; Boemo, E.; Castillo, E.; Parrilla, L. Ring Oscillators as Thermal Sensors in FPGAs: Experiments in Low Voltage. Proceedings of Programmable Logic Conference (SPL), Ipojuca, Brizal, 24–26 March 2010; pp. 133–137.
[9]
Hung, E.; Wilton, S.; Yu, H.; Chau, T.; Leong, P.H.W. A Detailed Delay Path Model for FPGAs. Proceedings of International Conference on Field-Programmable Technology, Sydney, Australia, 9–11 December 2009; pp. 96–103.
[10]
Rabaey, J.M.; Chandrakasan, A.; Nikolic, B. Digital Integrated Circuits; Prentice Hall: Upper Saddle River, NJ, USA, 2003.
[11]
Sedcole, P.; Cheung, P.Y.K. Within-Die Delay Variability in 90nm FPGAs and Beyond. Proceedings of IEEE International Conference on Field Programmable Technology, Bangkok, Thailand, 13–15 December 2006; pp. 97–104.
[12]
Masuda, H.; Ohkawa, S.; Kurokawa, A.; Aoki, M. Challenge: Variability Characterization and Modeling for 65- to 90-nm Processes. Proceedings of the Custom Integrated Circuits Conference, San Jose, CA, USA, 18–21 September 2005; pp. 593–599.
[13]
Friedberg, P.; Cao, Y.; Cain, J.; Wang, R.; Rabaey, J.; Spanos, C. Modeling Within-Die Spatial Correlation Effects for Process-Design Co-Optimization. Proceedings of the 6th International Symposium on Quality of Electronic Design, Washington, DC, USA, 21–23 March 2005; pp. 516–521.
[14]
Wolpert, D.; Ampadu, P. Managing Temperature Effects in Nanoscale Adaptive Systems; Springer: Berlin, Germany, 2012.
[15]
Gómez-Osuna, C.; Sánchez, M.A.; Ituero, P.; López-Vallejo, M. A Monitoring Infrastructure for FPGA Self-Awareness Dynamic Adaptation. Proceedings of 9th IEEE International Conference on Electronics, Circuits and Systems (ICECS), Sevilla, Spain, 10–13 December 2012.
