We try to give an explanation to the unexpected Urbach tailing associated to some phenomena which occur in some nano-compounds lattices. The provided discussion and notes are detailed here as a prelude to the lattice compatibility theory (LCT), a guide to a plausible understanding of this unsolved intrigue. 1. Introduction Urbach tailing alterations inside nanostructured lattices (Figure 1) have been always attributed to atomic-scale topological disorder, unexpected hybrid excitonic transitions, or topological filament occurrence [1–4]. In the beginning of the last decade, Urbach tailing has been attributed to the hydrogen content, and precisely the different E04 and sp2 contents inside nanofilms [5]. Another more realistic explanation has been provided earlier by Dow and Redfield [6]. This explanation claims that Urbach tailing is due to the broadening of the exciton absorption band which occurs when charged impurities in the lattice induce phonon-induced microelectric fields. This phenomenon has been also described, in II–VI compound semiconductors, as a reduction of holes-electrons Coulombic interactions which results in more free excitons, as long as exciton radii are larger than those of alkali halides. Many other causes have been proposed in the relevant literature [7–10]. Figure 1: Urbach tails occurrence scheme. In this paper, a prelude to the micro-chemistry-related Lattice Compatibility Theory (LCT) is provided as an attempt to explain Urbach tailing alterations in nano-structured lattices. The study is organized as follows. In Section 2, the experimental details and motivations are presented along with the studied nanomaterials patterns. In Section 3, the fundaments of the proposed Lattice Compatibility Theory LCT are discussed. Last section is a conclusion which summarizes the aim methods and perspectives of the work. 2. Experimental Details and Motivations In this study, targeted nano-materials are some bismuth oxides BSO, BGO, and BTO. These nano-materials are technologically interesting material, because they can function as a Pockels readout optical modulation (PROM) device and photorefractive sensors [11–18]. Crystals of these oxides were grown from highly purified Bi2O3, SiO2 and presintered BGO, and BTO powders using the Czochralski technique [19]. Elaboration was carried out in room atmosphere and the growing temperature was about 1110°C. Doped nano-crystals were prepared with doping content of 0.02？mol.% in the starting melt and the samples were reexcited each optically by UV radiations for photochromic effect studies. In order to
References
[1]
N. F. Mott, “Nobel Prize Lecture,” 1977.
[2]
N. F. Mott, Conduction in Non-Crystalline Materials, Calrendon Press, Oxford, UK, 2nd edition, 1993.
[3]
N. F. Mott, Metal-Insulator Transitions, Taylor & Francis, London, UK, 1974.
[4]
F. Urbach, “The long-wavelength edge of photographic sensitivity and of the electronic absorption of solids,” Physical Review, vol. 92, no. 5, p. 1324, 1953.
[5]
G. Fanchini and A. Tagliaferro, “Disorder and Urbach energy in hydrogenated amorphous carbon: a phenomenological model,” Applied Physics Letters, vol. 85, no. 5, pp. 730–732, 2004.
[6]
J. D. Dow and D. Redfield, “Toward a unified theory of Urbach's rule and exponential absorption edges,” Physical Review B, vol. 5, no. 2, pp. 594–610, 1972.
[7]
J. Zhou, Z. Zou, A. K. Ray, and X. S. Zhao, “Preparation and characterization of polycrystalline bismuth titanate Bi12TiO20 and its photocatalytic properties under visible light irradiation,” Industrial and Engineering Chemistry Research, vol. 46, no. 3, pp. 745–749, 2007.
[8]
P. Lacovara, “Room-temperature diode-pumped Yb: YAG laser,” Optics Letters, no. 16, pp. 1089–1091, 1991.
[9]
S. E. Lin, Y. L. Kuo, C. H. Chou, and W. C. J. Wei, “Characterization of electrolyte films deposited by using RF magnetron sputtering a 20 mol% gadolinia-doped ceria target,” Thin Solid Films, vol. 518, no. 24, pp. 7229–7232, 2010.
[10]
S. Tekeli and U. Demir, “Colloidal processing, sintering and static grain growth behaviour of alumina-doped cubic zirconia,” Ceramics International, vol. 31, no. 7, pp. 973–980, 2005.
[11]
C. H. Weng and W. C. J. Weiw, “Synthesis and properties of homogeneous Nb-doped bismuth oxide,” Journal of the American Ceramic Society, vol. 93, no. 10, pp. 3124–3129, 2010.
[12]
S. Lanfredi, J. F. Carvalho, and A. C. Hernandes, “Electric and dielectric properties of Bi12TiO20 single crystals,” Journal of Applied Physics, vol. 88, no. 1, pp. 283–287, 2000.
[13]
S. Lanfredi and M. A. L. Nobre, “Conductivity mechanism analysis at high temperature in bismuth titanate: a single crystal with sillenite-type structure,” Applied Physics Letters, vol. 86, no. 8, Article ID 081916, 3 pages, 2005.
[14]
D. Dirksen and G. Von Bally, “Holographic double-exposure interferometry in near real time with photorefractive crystals,” Journal of the Optical Society of America B, vol. 11, no. 9, pp. 1858–1863, 1994.
[15]
A. A. Kamshilin and M. P. Petrov, “Continuous reconstruction of holographic interferograms through anisotropic diffraction in photorefractive crystals,” Optics Communications, vol. 53, no. 1, pp. 23–26, 1985.
[16]
S. Mallick, D. Rouède, and A. G. Apostolidis, “Efficiency and polarization characteristics of photorefractive diffraction in a Bi12SiO20 crystal,” Journal of the Optical Society of America, vol. 4, no. 8, pp. 1247–1259, 1987.
[17]
P. Günter and J.-P. Huignard, Photorefractive Materials and Their Applications: Fundamental Phenomena, vol. 61 of Topics in Applied Physics, Springer, Berlin, Germany, 1988.
[18]
Y. Dimitriev, K. Krupchanska, Y. Yvanova, and A. Staneva, “Sol-gel synthesis ofi materials in the system Bi2O3-SiO2,” Journal of the University of Chemical Technology and Metallurgy, vol. 45, no. 1, pp. 39–42, 2010.
[19]
Y. A. Borovlev, N. V. Ivannikova, V. N. Shlegel, Y. V. Vasiliev, and V. A. Gusev, “Progress in growth of large sized BGO crystals by the low-thermal-gradient Czochralski technique,” Journal of Crystal Growth, vol. 229, no. 1, pp. 305–311, 2001.
[20]
R. C. Troth and J. C. Dainty, “Holographic interferometry using anisotropic self-diffraction in Bi12SiO20,” Optics Letters, vol. 16, pp. 53–55, 1991.
[21]
C. Elissalde and J. Ravez, “Ferroelectric ceramics: defects and dielectric relaxations,” Journal of Materials Chemistry, vol. 11, no. 8, pp. 1957–1967, 2001.
[22]
R. J. Betsch and W. B. White, “Vibrational spectra of bismuth oxide and the sillenite-structure bismuth oxide derivatives,” Spectrochimica Acta A, vol. 34, no. 5, pp. 505–514, 1978.
[23]
M. H. Tuilier, H. Dexpert, P. Lagarde, M. Devalette, and N. Khachani, “An exafs study of the local distortions in some Bi12[ ]O20 oxides with sillenite-type structure,” Journal of Physics and Chemistry of Solids, vol. 48, no. 8, pp. 707–711, 1987.
[24]
Y. Nagao and Y. Mimura, “Properties of Bi12SiO20 single crystals containing first row transition metal,” Materials Research Bulletin, vol. 24, no. 2, pp. 239–246, 1989.
[25]
M. Ichimura and J. Narayan, “Atomic study of dislocation nucleation in Ge/(001)Si heterostructures,” Philosophical Magazine A, vol. 72, p. 281, 1995.
[26]
W. D. Nix, “Mechanical properties of thin films,” Metallurgical Transactions A, vol. 20, no. 11, pp. 2217–2245, 1989.
[27]
I. A. Ovid'ko, “Misfit dislocation walls in solid films,” Journal of Physics Condensed Matter, vol. 11, no. 34, pp. 6521–6527, 1999.
[28]
L. B. Freund, “The mechanics of dislocations in strained-layer semiconductor materials,” in Advances in Applied Mechanics, W. Hutchinson and T. Y. Wu, Eds., pp. 1–66, Academic Press, New York, NY, USA, 1993.
[29]
E. A. Fitzgerald, “Dislocations in strained-layer epitaxy: theory, experiment, and applications,” Materials Science Reports, vol. 7, no. 3, pp. 87–142, 1991.
[30]
J. H. Van der Merwe, “Strain relaxation in epitaxial overlayers,” Journal of Electronic Materials, vol. 20, no. 10, pp. 793–803, 1991.
