|
|
Material Sciences 2013
4Cr5MoSiV1钢的热变形行为及热加工图
|
Abstract:
| [1] | 潘健生, 胡明娟. 热处理工艺学[M]. 北京: 高等教育出版社, 2009: 247-253. |
| [2] | 周敬恩. 模具材料选用、热处理与使用寿命[J]. 金属热处理, 1999, 5: 1-13. |
| [3] | 干勇, 田志勇, 董瀚. 中国材料工程大典[M]. 北京: 化学工业出版社, 2005: 97-99. |
| [4] | 刘以宽, 李润宝, 毛文华. H13钢铝合金压铸模的研制和使用[J]. 金属热处理, 1990, 35(2): 51-55. |
| [5] | 陈杰. H13钢及其热处理[J]. 热处理技术与装备, 2008, 29(4): 44-46. |
| [6] | 晏广华, 黄新民, 褚作朋等. 不同热处理工艺下H13钢组织性能的变化[J]. 合肥工业大学学报(自然科学版), 2011, 34(6): 834-837. |
| [7] | C. Tekmen, M. Toparli, I. Ozdemir, et al. High temperature behaviour of H13 steel. Materials Research and Advanced Tech- niques, 2005, 96(12): 1431-1433. |
| [8] | R. Milovic, D. Manojlovic and M. Andjelic. Hot workability of M2 type high-speed steel. Steel Research, 1992, 62: 78-84. |
| [9] | W. Roberts. Dynamic changes that occur during hot working and their significance regarding microstructural development and hot workability. G. Krauss. Deformation, processing and structure. Metals Park: American Society for Metals, 1984: 109-184. |
| [10] | H. J. McQueen, N. D. Ryan. Constitutive analysis in hot work- ing. Materials Science and Engineering, 2002, 322(1-2): 47. |
| [11] | Y. Prasad, T. Seshacharyulu. Modeling of hot deformation for microstructural control. International Materials Reviews, 1998, 43(6): 243-258. |
| [12] | Y. V. R. K. Prasad, H. L. Gegel, S. M. Doraivelu, J. C. Malas, J. T. Morgan, K. A. Lark and D. R. Barker. Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242. Met- allurgical Transactions A, 1984, 15(10): 1883-1892. |
