全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

Microwave Absorbing Properties of Nickel―coated Graphene

DOI: 10.3724/sp.j.1077.2011.00467

Keywords: graphene, chemical plating nickel, microwave absorption properties

Full-Text   Cite this paper   Add to My Lib

Abstract:

Graphene sheets were prepared by using chemical reduction of a colloidal suspension of graphene oxide sheets in water. After hydrophilic treatment and chemical plating, a layer of nickel particles was uniformly coated on the surfaces of the graphene sheets. The morphologies of the pure graphene (GF) and Ni―coated graphene (NGF), nickel element content on the graphene surface and magnetic properties of the NGF were examined by SEM, EDX and VSM, respectively. The complex relative permittivity and permeability of the NGF absorber were measured by using a microwave network analyzer in the frequency range of 2―18 GHz. The reflection loss curves of the GF and NGF were calculated using computer simulation technique. It is found that in the frequency range of 2―18 GHz, with the increase of the matching thickness, the maximum absorbing peaks of the GF and NGF shift to lower frequency region, so GF and NGF are dielectric loss microwave absorption materials. When the matching thickness is 1 mm, the maximum absorption peak of the GF is ―6.5dB at about 7GHz. When the matching thickness is 1.5 mm, the maximum absorption peak of the NGF is ―16.5dB at 9.25 GHz and the frequency region in which the maximum reflection loss is more than ―10.0 dB is 9.5―14.6 GHz.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133