In a ground anchor system, cables or tendons connected to a bearing plate are used for stabilization of slopes. Then, the stability of a slope is dependent on maintaining the tension levels in the cables. So far, no research on a strain-based field sensing system for ground anchors has been reported. Therefore, in this study, a practical monitoring system for long-term sensing of tension levels in tendons for anchor-reinforced slopes is proposed. The system for anchor-reinforced slopes is composed of: (1) load cells based on vibrating wire strain gauges (VWSGs), (2) wireless sensor nodes which receive and process the signals from load cells and then transmit the result to a master node through local area communication, (3) master nodes which transmit the data sent from sensor nodes to the server through mobile communication, and (4) a server located at the base station. The system was applied to field sensing of ground anchors in the 62 m-long and 26 m-high slope at the side of the highway. Based on the long-term monitoring, the safety of the anchor-reinforced slope can be secured by the timely applications of re-tensioning processes in tendons.
References
[1]
Rahimi, A.; Rahardjo, H.; Leong, E.C. Effect of hydraulic properties of soil on rainfall-induced slope failure. Eng. Geol. 2010, 114, 135–143.
[2]
Lee, D.H.; Yang, Y.E.; Lin, H.M. Assessing slope protection methods for weak rock slopes in Southwestern Taiwan. Eng. Geol. 2007, 91, 100–116.
[3]
Angeli, M.G.; Pasuto, A.; Silvano, S. A critical review of landslide monitoring experiences. Eng. Geol. 2000, 66, 133–147.
[4]
Corominas, J.; Moya, J.; Lloret, A.; Gili, J.A.; Angeli, M.G.; Pasuto, A.; Silvano, S. Measurement of landslide displacements using a wire extensometer. Eng. Geol. 2000, 55, 149–166.
[5]
Okamoto, K.; Watanabe, T.; Ban, H.; Maeda, Y. Video monitoring of slope failure using spatiotemporal gabor filtering. Proceedings of IEEE International Conference on Systems, Man and Cybernetics, San Antonio, TX, USA, 11–14 October 2009; pp. 960–965.
[6]
Zhao, X.P.; Yan, L.L; Liu, W.L. Research on monitoring the shape of slope based on the three-dimensional laser scanning technology. Sci. Surv. Map. 2010, 35, 25–27.
[7]
Su, M.B.; Chen, I.H.; Liao, C.H. Using TDR cables and GPS for landslide monitoring in high mountain area. J. Geotech. Geoenviron. Eng. 2009, 135, 1113–1121.
[8]
Smoltczyk, U. Geotechnical Engineering Handbook: Volume 2: Procedures; Ernst & Sohn: Berlin, Germany, 2003; pp. 169–230.
[9]
Execution of Special Geotechnical Works: Ground Anchors. BS EN 1537:2000; European Committee for Standardization: Brussels, Belgium, 2000.
[10]
Recommendations for Prestressed Rock and Soil Anchors; Post-Tensioning Institute: Phoenix, AZ, USA, 2004.
[11]
Japanese Geotechnical Society. Guidelines for the Design and Application of Ground Anchors, Including Interpretation (In Japanese). JGS 4101-2000; Japanese Geotechnical Society: Tokyo, Japan, 2007.
[12]
Jung, H.; Kim, J.Y.; Chang, K.T.; Jung, C.S. Slope movement detection using ubiquitous sensor network. J. Electr. Eng. Technol. 2009, 14, 143–148.
[13]
He, M.C.; Tao, Z.G.; Zhang, B. Application of remote monitoring technology in landslides in the Luoshan mining area. Min. Sci. Technol. 2009, 19, 609–614.
[14]
Song, X.G.; Ma, Z.; Zhang, H.B.; Wang, Q.; Zhuang, P.Z. Design and application of automatic monitoring system in side slope. Adv. Mater. Res. 2011, 243–249, 2613–2617.
[15]
Barley, A.D.; Windsor, C.R. Recent advances in ground anchor and ground reinforcement technology with reference to the development of the art. Proceedings of GeoEng2000: International Conference on Geotechnical and Geological Engineering, Melbourne, Australia, 19–24 November 2000; pp. 1084–1094.
[16]
Public Works Research Institute and Japan Anchor Association. Ground Anchor Maintenance Management Manual (In Japanese); Kajima Institute Publishing Co, Ltd.: Tokyo, Japan, 2008.
[17]
Sreeshylam, P.; Ravisankar, K.; Parivallal, S.; Kesavan, K.; Sridhar, S. Condition monitoring of prestressed concrete structures using vibrating wire sensors. Int. J. COMADEM 2008, 11, 46–54.
[18]
Lee, H.M.; Kim, J.M.; Sho, K.; Park, H.S. A wireless vibrating wire sensor node for continuous structural health monitoring. Smart Mater. Struct. 2010, 19, doi:10.1088/0964-1726/19/5/055004.
[19]
Texas Instruments. Single Chip Very Low Power RF Transceiver with 8051-Compatible Microcontroller. Available online: http://www.ti.com/product/cc1010 (accessed on 12 February 2013).
[20]
Mitchell, K.; Dang, N.; Liu, P.; Rao, V.S.; Pottinger, H.J. Web-controlled wireless network sensors for structural health monitoring. Proc. SPIE 2001, 4334, 234–243.
