|
Examples of New Models Applied in Selected Simulation Systems with Respect to DatabaseKeywords: Application of Information Technology to the Foundry Industry , Porosity and structure prediction , Databases , Thermo-physical , parameters , Simulation codes , AlSi alloys Abstract: The tolerance of damage rule progressively meets the approval in the design casting parts procedures. Therefore, there were appeared thenew challenges and expectations for permanent development of process virtualization in the mechanical engineering industry.Virtualization is increasingly developed on the stage of product design and materials technologies optimization. Increasing expectations of design and process engineers regarding the practical effectiveness of applied simulation systems with new proposed up-grades modules is observed. The purpose is to obtain simulation tools allowing the most possible realistic prognosis of the casting structure, including indication, with the highest possible probability, places in the casting that are endangered with the possibility of shrinkage– and gas porosity formation. This 3D map of discontinuities and structure transformed in local mechanical characteristics are used to calculate the local stresses and safety factors. The needs of tolerance of damage and new approach to evaluate the quality of such prognosis must be defined. These problems of validation of new models/modules used to predict the shrinkage– and gas porosity including the chosen structure parameters in the example of AlSi7 alloy are discussed in the paper.
|