Current-activated tip-based sintering (CATS) is a novel process where spark plasma sintering conditions are applied through an electrically conducting tip on a locally controlled area on a green powder compact/bed. The localization of electric current in CATS allows for unique temporal and spatial current and temperature distributions within the tip and powder compact. In this paper, special experimental setups were used to monitor the temperature profiles in the tip and at multiple locations on the surface of nickel powder compacts. A variation in the initial green density was found to have a significant effect on the maximum temperature in the tip as well as the temperature distribution across the powder compact. In general, the lowest green density specimens displayed the best conditions for localized densification. The concept of effective current density is introduced and results are discussed in relation to the densification parameter.
References
[1]
Mal’tsev, M. Electric rolling of powder materials with a dielectric phase. Powder Metall. Metal Ceram. 2003, 42, 225–229, doi:10.1023/A:1025751125060.
[2]
Mal’tsev, M. Electric rolling of metal powders in roller electrodes. Powder Metall. Metal Ceram. 2005, 44, 222–227, doi:10.1007/s11106-005-0085-3.
[3]
Morsi, K.; El Desouky, A.; Johnson, B.; Mar, A.; Lanka, S. Spark plasma extrusion (SPE): Prospects and potential. Scr. Mater. 2009, 61, 395–398.
[4]
Morsi, K.; Essawi, A.M.K.; Borah, P.; Sayed, A.; Taher, M. Properties of single and dual matrix aluminum–carbon nanotube composites processed via spark plasma extrusion (SPE). Mat. Sci. Eng. 2010, 527, 5686–5690.
El Desouky, A. Multi-Scale Current Activated Tip-Based Sintering of Powder-Based Materials. Ph.D. Dissertation, University of California-San Diego and San Diego State University, USA, 2012.
[7]
Patel, M.; Moon, K.S.; Kassegne, S.K.; Morsi, K. Effect of current intensity and cumulative exposure time on the localized current-activated sintering of titanium nickelides. J. Mater. Sci. 2011, 46, 6690–6699, doi:10.1007/s10853-011-5622-5.
[8]
Numula, A.; Kassegne, K.S.; Moon, K.; Morsi, K. Current Activated Tip-Based Sintering of Ni-Al Intermetallics. Metallogr. Microstruct. Anal.. submitted for publication 2013.
[9]
El Desouky, A.; Moon, K.S.; Kassegne, S.K.; Morsi, K. Current Activated Tip-Based Sintering as a Micro-Fabrication Tool. In Proceeding of Europe PM2013 Congress & Exhibition, Sweden, 15–18 September 2013.
[10]
German, R.M. Sintering Theory and Practice; Wiley: New York, NY, USA, 1996.
[11]
Lefebvre, L.P.; Pleizier, G.; Deslandes, Y. Electrical resistivity of green powder compacts. Powder Metall. 2001, 44, 259–266.
[12]
Jones, W.D. Fundamental Principles of Powder Metallurgy; Edward Arnold: London, UK, 1960.
