This study developed portable, non-invasive flexible humidity and temperature microsensors and an in situ wireless sensing system for a proton exchange membrane fuel cell (PEMFC). The system integrated three parts: a flexible capacitive humidity microsensor, a flexible resistive temperature microsensor, and a radio frequency (RF) module for signal transmission. The results show that the capacitive humidity microsensor has a high sensitivity of 0.83 pF%RH？1 and the resistive temperature microsensor also exhibits a high sensitivity of 2.94 × 10？3 °C？1. The established RF module transmits the signals from the two microsensors. The transmission distance can reach 4 m and the response time is less than 0.25 s. The performance measurements demonstrate that the maximum power density of the fuel cell with and without these microsensors are 14.76 mW·cm？2 and 15.90 mW·cm？2, with only 7.17% power loss.
References
[1]
Carrette, L; Friedrich, KA; Stimming, U. Fuel cells: Principles, types, fuels, and applications. ChemPhysChem 2000, 1, 162–193.
Rowe, A; Li, X. Mathematical modeling of proton exchange membrane fuel cells. J. Power Sources 2001, 102, 82–96.
[4]
Prater, KB. Polymer electrolyte fuel cells: A review of recent developments. J. Power Sources 1994, 51, 129–144.
[5]
Nishikawa, H; Kurihara, R; Sukemori, S. Measurements of humidity and current distribution in a PEFC. J. Power Sources 2006, 155, 213–218.
[6]
Lee, CY; Wu, GW; Hsieh, CL. In situ diagnosis of micrometallic proton exchange membrane fuel cells using microsensors. J. Power Sources 2007, 172, 363–367.
Shannon, MA; Leicht, TM; Hrnjak, PS; Miller, NR; Khan, FA. Thin-film resistance sensor for measuring liquid mass fraction in super-heated refrigerant. Sens. Actuat. A 2001, 88, 164–177.
[9]
Dokmeci, M; Najafi, K. A high-sensitivity polyimide humidity sensor for monitoring hermetic micropackages. Proceedings of the 12th IEEE International Conference on Micro Electro Mechanical Systems, Orlando, FL, USA, 17–21 January 1999; pp. 279–284.
[10]
Kim, Y; Jung, B; Lee, H; Kim, H; Lee, K; Park, H. Capacitive humidity sensor design based on anodic aluminum oxide. Sens. Actuat. B 2009, 141, 441–446.
[11]
Gu, L; Huang, QA; Qin, M. A novel capacitive-type humidity sensor using CMOS fabrication technology. Sens. Actuat. B 2004, 99, 491–498.
[12]
Kim, JS; Kwak, KY; Kwon, KH; Min, NK; Kang, MS. A locally cured polyimide-based humidity sensor with high sensitivity and high speed. Proceedings of the IEEE International Conference on Sensors, Lecce, Italy, 26–29 October 2008; pp. 434–437.
[13]
Kim, JH; Hong, SM; Lee, JS; Moon, BM; Kim, K. High sensitivity capacitive humidity sensor with a novel polyimide design fabricated by MEMS technology. Proceedings of the 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Shenzhen, China, 5–8 January 2009; pp. 703–706.
[14]
Wilson, JS. Sensor Technology Handbook; Butterworth-Heinemann: Boston, MA, USA, 2004.
[15]
Xiao, S; Che, L; Li, X; Wang, Y. A cost-effective flexible MEMS technique for temperature sensing. Microelectron. J 2007, 38, 360–364.
[16]
Shih, WP; Tsao, LC; Lee, CW; Cheng, MY; Chang, C; Yang, YJ; Fan, KC. Flexible temperature sensor array based on a graphite-polydimethylsiloxane composite. Sensors 2010, 10, 3597–3610.
[17]
Innovative Sensor Technology, Available online: www.ist-ag.ch (accessed on 15 July 2011).
[18]
Lee, CY; Hsieh, WJ; Wu, GW. Embedded flexible microsensors in MEA for measuring temperature and humidity in a micro-fuel cell. J. Power Sources 2008, 181, 237–243.
