INFLUENCE OF LOCAL BRITTLE ZONE ON THE FRACTURE TOUGHNESS OF HIGH-STRENGTH LOW-ALLOYED MULTIPASS WELD METALS
INFLUENCE OF LOCAL BRITTLE ZONE ON THE FRACTURETOUGHNESS OF HIGH-STRENGTH LOW-ALLOYEDMULTIPASS WELD METALS

In this paper, toughness properties and microstructurc of low-alloyed multipass welds with yield strength above 700MPa have 6een studied using the weld thermal simulation and throughout thickness CTOD fracture mechanics tests. Impact testing of thermal simulated specimens showed that the primary weld metal and the fine gmmed weld metal had good toughness, while the coarse grained weld metal had the lowest toughness value as the local brittle zone (LBZ) in multipass weld metals. Cleavage fracture in CTOD testing of thick multipass weld metals was initiated from martensite-austenite (MA) phases in the LBZ. MA phases were distributed at the prior austenite grain boundaries and around ferrite grains. As the size of the local brittle zone along the fatigue crack front increases, CTOD frncture toughness of multipass weld metals decreases. The weakest link theory was used to evaluate effect of the local brittle zone on fracture toughness of thick multipass weld metals. The estimated curves agree well with the eaperimental data.