Filamentous Overgrowth in Aerobic Granules
好氧颗粒污泥中丝状微生物生长研究

Filamentous overgrowth has been observed after aerobic granulation in shaking sequencing batch reactors (SSBR). The factors affecting the filamentous overgrowth in aerobic granules and its possible control methods were investigated. It was found that both the influent and sludge inoculation largely influenced the filamentous overgrowth in aerobic granules. With the same activated sludge inoculation, the filamentous overgrowth in R3 treating fresh wastewater was much more severe than that in R1 treating saline wastewater. The filamentous overgrowth in R2 was the least among the three reactors, which was inoculated anaerobic granules and treated saline wastewater. When the filamentous overgrowth happened at the outer aerobic granules, Delta referring the degree of filamentous overgrowth achieved DeltaR1 = 1.4, DeltaR2 = 1.2 and DeltaR3 = 2.0, respectively. Filamentous identification showed that the filamentous microorganisms in R1 mainly composed of Eikelboom 0092 and Nocardia spp., Fungi spp. and Nocardia spp. in R2, S. natans and H. hydrossis in R3. The identified filamentous microorganisms likely occurred in conditions with long SRT, low dissolved oxygen and biodegradable substrates. However, due to the fact that filamentous overgrowth in aerobic granules initiated in the inner part of the granules and acted as frameworks with rod-shape or coccoid bacteria entrapping into in the granulation period, various strategies effectively in dealing with conventional bulking problems including shorting SRT, changing organic loading rate and enhancing aeration et al, could not effectively inhibit the filamentous growth in aerobic granules. The filamentous overgrowth was ultimately controlled through changing the substrate from synthetic glucose-rich wastewater to non-biodegradable wastewater.