A novel high CMRR current output stage (COS) with QFG is presented in this paper. A novel common mode feedback (CMFB) is used to reject the common mode signal in order to achieve high CMRR. The common mode signal is omitted by the technique of adding the main signal and its opposite polarity one. 112 dB of CMRR is obtained in 0.35 μm CMOS technology with ±0.75 v supply voltage and only 182μw power dissipation which shows good improvement compared to the other work in the literature.
References
[1]
E. Allen and M. Terry, “The Use of Current Amplifier in High Performance Voltage Application,” IEEE Journal of Solid State Circuits and Systems, Vol. 15, No. 2, 1980, pp. 155-162. doi:10.1109/JSSC.1980.1051357
[2]
C. Toumazou, F. J. Lidgey and D. G. Haigh, Eds., “Analogue IC Design: The Current-Mode Approach,” Peter Peregrinus Ltd., London, 1993.
[3]
S. Rajput and S. S. Jamuar, “Low Voltage Analog Circuit Design Techniques,” Circuits and Systems Magazine, Vol. 2, No. 1, 2002, pp. 24-42.
doi:10.1109/MCAS.2002.999703
[4]
G. Plamisano, C. Palumbo and S. Pennisi, “CMOS Current Amplifiers,” Kluwcr Academic Publishers, Boston, 1999. doi:10.1007/978-1-4615-5135-5
[5]
C. Toumazou, F. Lidgey and D. Haigh, Eds., “Analogue IC Design: The Current-Mode Approach,” Peregrinus, London, 1990.
[6]
A. F. Arbel, “Output Stage for Current-Mode Feedback Amplifiers, Theory and Applications,” Analog Integrated Circuits and Signal Processing, Vol. 2, No. 3, 1992, pp. 243-255. doi:10.1007/BF00276637
[7]
S. Pennisi, M. Piccioni, G. Scotti and A. Trifiletti, “HighCMRR Current Amplifier Architecture and Its CMOS Implementation,” IEEE Transactions on Circuits and Systems II: Express Briefs, Vol. 53, No. 10, 2006, pp. 1118-1122.
[8]
J. A. De Lima and C. Dualibe, “A Linearly Tunable LowVoltage CMOS Transconductor with Improved CommonMode Stability and Its Applications to gm-C Filters,” IEEE Transactions on Circuits and Systems II: Express Briefs, Vol. 48, No. 7, 2001, pp. 649-660.
doi:10.1109/82.958335
[9]
F. Centurelli, A. D. Grasso, S. Pennisi, G. Scotti and A. Trifiletti, “CMOS High-CMRR Current Output Stages,” IEEE Transactions on Circuits and Systems II: Express Briefs, Vol. 54, No. 9, 2007, pp. 745-749.
doi:10.1109/TCSII.2007.900351
[10]
F. Centurelli, S. Pennisi and A. Trifiletti, “Current Output Stage with Improved CMRR,” 2003 IEEE International Conference on Circuits and Systems, Vol. 2, 14-17 December 2003, pp. 543-546.
[11]
N. Larciprete, F. Loriga, P. Marietti and A. Trifiletti, “A High CMRR GaAs Single-Input to Differential Convertor,” Gallium Arsenide Application Symposium GAAS 1996, Paris, 5-7 June 1996, pp. 4-9.
[12]
M. H. Kashtiban and S. J. Azhari, “A Novel High CMRR Low Voltage Current Output Stage,” Proceedings of 2009 IEEE International Symposium on Circuits and Systems, 9-10 July 2009, pp. 1-4.
[13]
F. Centurelli, S. Pennisi and A. Trifiletti, “High-CMRR CMOS Current Output Stage,” Electronics Letters, Vol. 39, No. 13, 2003, pp. 945-946. doi:10.1049/el:20030602
[14]
K.-H. Cheng and H.-C. Wang, “Design of Current Mode Operational Amplifier with Differential-Input and Differential-Output,” Proceedings of 1997 IEEE International Symposium on Circuits and Systems, Vol. 1, 9-12 June 1997, pp. 153-156.
[15]
I. Mucha, “Current Operational Amplifiers: Basic Architecture, Properties, Exploitation and Future,” Analog Integrated Circuits and Signal Processing, Vol. 7, No. 3, 1995, pp. 243-255. doi:10.1007/BF01250804
[16]
E. Bruun, “Bandwidth Optimization of Low Power, High Speed CMOS Current Op Amp,” International Journal of Analog Integrated Circuits and Signal Processing, Vol. 7, 1995, pp. 11-19. doi:10.1007/BF01256443
