Caracteriza？？o tecnológica dos tipos de minério de fosfato do Complexo Alcalino de Salitre, MG - área Fosfertil

the present study was carried out on six different ore types from the salitre alkaline complex aiming to determine their mineralogical composition and the major features that are relevant in the mineral processing. the p2o5 grades vary from 9 to 25%. the slime content (-0,020 mm) varies between 20 and 34% (w/w) and carries 17-22% of the p2o5 content. the samples essentially consist of apatite, iron oxi-hydroxides, ilmenite, clayminerals, carbonate, quartz, pyroxene, perovskite, secondary phosphates and other minor accessory minerals. below 0.21 mm, apatite essentially occurs in free particles showing a clean surface or a weak coating of iron oxi-hydroxides; the highly covered apatite (not recoverable by flotation) varies from 6 to 9%. in the deslimed fraction (above 0.020 mm) more than 97% of the total phosphor content occurs as apatite; the estimated p2o5 potential recovery in flotation concentration is over 90% (71-76% overall recovery).