All Title Author
Keywords Abstract

Publish in OALib Journal
ISSN: 2333-9721
APC: Only $99
Paper Submission

Why Us? >>
- Open Access
- Peer-reviewed
- Rapid publication
- Lifetime hosting
- Free indexing service
- Free promotion service
- More...
- Search engine friendly

American Journal of Materials Science

ISSN Print: 2162-9382

ISSN Online: 2162-8424

Website: http://www.sapub.org/Journal/aimsandscope.aspx?journalid=1001

Share:




Go

Tribological Aspects of Wear of Polished Steel Surfaces in dry Friction Contact on Polymer Composites with Glass Fibres

Finite Element Modeling of Composite Materials Subjected to the Low Velocity Impact Damage

Understanding Interactions between Cellulose and Phosphate Esters in Papermaking

Synthesis of Gold-Palladium Bimetallic Nanoparticles and Surface Catalytic Activity in Suzuki Coupling Reactions Using in FTIR Spectroscopy

Microstructure and Electrochemical Behavior of in Vitro Ti-26Nb, Ti-26Zr and Ti-26Ta Alloys Processed by Levitation Melting Technique

Electrical Characteristic Measurement of the Fabricated CdSe / P-Si Heterojunction Solar Cell Under Radiation Effect

A Novel Method for Evaluation of Band Width of MEMS-Based Embedded Gas Sensor

Synthesis and Characterization of ZrO2 Thin Films

Electricalconductivity and Dielectric Properties of Bi0.5(Na0.7K0.2Li0.1)0.5TiO3 Ceramic Material

On the Primary Phase Microstructure of Solidifying Ti-46Al-8Nb Refractory Intermetallic Alloy

Synthesis, Structural and Magnetic Characterization of Ni-Doped ZnO Diluted Magnetic Semiconductor

Features of the Solid Solution (Mo0.9,Cr0.1)Si2 Formation Depending on the State of Initial Mixture

Micro-Structural Characterization of Si-SiC Ceramic Derived from C/C-SiC Composite

Nucleation Controlled in the Aggregative Growth of Strontium Carbonate Microcrystals

Preparation and Characterization of Polyaniline-Co3O4 Nanocomposites via Interfacial Polymerization

Photoluminescence Studies on Nanocrystalline Tin Oxide Powder for Optoelectronic Devices

Natural Rubber/ Organoclay Nanocomposite from Tea (Camellia Sinensis) Seed Oil Derivative

Biomimetic Mineralization of BaCO3 Microstructures By Simple CO2 Diffusion Method

Effect of Heat Input on the Properties of Dissimilar Friction Stir Welds of Aluminium and Copper

Cuinse2 Solar Cells Efficiency Optimization

Observation of Conductivity Type Change in Swift Heavy Ion Irradiated Metal/Semiconductor Devices

Tensile Behavior of Cryorolled Zircaloy-2

Thermodynamic Research of Solubility of Irradiate Cross-linked Copolymers in Mix Butadiene Nitrile with Polyvinylchloride

Impacts of Heat Treatment on the Electrochemical Properties of AA3003 expose to 0.1M Hydrochloric Acid Media

Capacitive Behavior of Manganese Dioxide/Stainless Steel Electrodes at Different Deposition Currents

Comparative Studies of The Effect of Particle Size on the Microstructural Characteristics of Bi2O3 and Sb2O3 Additives on Sintered Zno Ceramics

Dimensional and Geometric Deviations Induced by Milling of Annealed and Hardened AISI H13 Tool Steel

Effect of Load and Sliding Velocity on Friction Coefficient of Aluminum Sliding Against Different Pin Materials

Tartrazine Dye and Bovine Serum Albumin: the Influence of pH on Adsorption Process

Magnetic Susceptibility Measurements on Fly Ash Admixtured Cement Hydrated with Groundwater and Seawater

Shape Controlled Synthesis of Barium Carbonate Microclusters and Nanocrystallites using Natural Polysachharide – Gum Acacia

New Concepts for Improved Durability of MOM Total Hip Endoprostheses. A Review

Characteristics Study of Silicon Nanoparticles Produced by Physical Vapour Deposition

Effect of Film Thickness on Optical Properties of Tin Selenide Thin Films Prepared by Thermal Evaporation for Photovoltaic Applications

Structural Transitions of Silicate Nanocrystals in the Glass

Solid Particle Erosion of Short Glass Fiber Reinforced Polyester Composite

Determination of Exact Steady State Creep Behavior in Short Fiber Composites by Mapping Transformation Function (MTF) in MMC’s

Material Processing Technology for Soft Ferrites Manufacturing

Design and Simulation of MEMS Based Piezoelectric Shear Actuated Beam

Dielectric Properties of Biocompatible and Biodegradable Polycaprolone and Polylactide and Their Nanocomposites in the Millimeter Wave Band

Gaussian Distribution on Electrical Characteristics of Al/SiO2/p-Si Structures

Ferroelectric Relaxor Behavior and Spectroscopic Properties of Ba2+ and Zr4+ Modified Sodium Bismuth Titanate

Optical Properties of 3,4,9,10-Perylenetetracarboxylic Diimide (PTCDI) Organic Thin Films as a Function of Post-Annealing Temperatures

Evolution of Structure, Microstructure, Electrical and Magnetic Properties of Nickel Oxide (NiO) with Transition Metal ion Doping

The Sensitivity of Hopping Transport in Dipolar Glasses and Molecularly Doped Polymers to Localised Dipole Ordering

Effect of Reinforcement Particles on the Fluidity and Solidification Behavior of the Stir Cast Aluminum Alloy Metal Matrix Composites

Artificial Neural Network Modeling for Al-Zn-Sn Sacrificial Anode protection of Low Carbon Steel in Saline Media

Application of the Experiment Design Method in Modelling the Temperature Effect on the Behaviour at a Low Velocity Impact Damage of Epoxy Matrix Reinforced with Unidirectional Carbon Fiber Composite

Evolution of Dislocation Substructures in Fatigue Loaded and Failed Stainless Steel Processed by High-intensity Electron Beam

Band Gap Determination of Copper Doped Tungsten Diselenide Single Crystals by Optical Absorption Method

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705