All Title Author
Keywords Abstract

Publish in OALib Journal
ISSN: 2333-9721
APC: Only $99
Paper Submission

Why Us? >>
- Open Access
- Peer-reviewed
- Rapid publication
- Lifetime hosting
- Free indexing service
- Free promotion service
- More...
- Search engine friendly

Journal of Manufacturing and Materials Processing | An Open Access Journal from MDPI

ISSN Print: 2504-4494

ISSN Online:

Website: https://www.mdpi.com/journal/jmmp

Share:




Go

An Investigation into Tool Wear and Hole Quality during Low-Frequency Vibration-Assisted Drilling of CFRP/Ti6Al4V Stack

Possibility of Fabricating Anisotropic Conductive Film with a Line-and-Space-Like Pattern by Stick-Slip Accompanying Abrasion

A Control Method for the Ultrasonic Spot Welding of Fiber-Reinforced Thermoplastic Laminates through the Weld-Power Time Derivative

Prediction of Surface Quality Based on the Non-Linear Vibrations in Orthogonal Cutting Process: Time Domain Modeling

Hot Extrusion of ZnSb-Based Thermoelectric Materials; A Novel Approach for Scale-Up Production

A Scale-up of Energy-Cycle Analysis on Processing Non-Woven Flax/PLA Tape and Triaxial Glass Fibre Fabric for Composites

Influence of the Wire Feeding on the Wetting Process during Laser Brazing of Aluminum Alloys with Aluminum-Based Braze Material

Benchmarking of Laser Powder Bed Fusion Machines

Micromagnetic Analysis of Thermally Induced Influences on Surface Integrity Using the Burning Limit Approach

Effect of Tool Design and Process Parameters on Lap Joints Made by Right Angle Friction Stir Welding (RAFSW)

A Semianalytical Model for the Determination of Bistability and Curvature of Metallic Cylindrical Shells

Five-Axis Machine Tool Coordinate Metrology Evaluation Using the Ball Dome Artefact Before and After Machine Calibration

Dimensional Quality and Distortion Analysis of Thin-Walled Alloy Parts of AlSi10Mg Manufactured by Selective Laser Melting

Chip Morphology and Delamination Characterization for Vibration-Assisted Drilling of Carbon Fiber-Reinforced Polymer

Kinematically Coupled Force Compensation—Experimental Results and Advanced Design for the 1D-Implementation？

Scale, Material Concentration, Stress Relief and Part Removal Effects on the Dimensional Behaviour of Selected AlSi10Mg Components Manufactured by Laser Powder Bed Fusion

Multi-Cycle Process Signature of Laser-Induced Thermochemical Polishing

Process Stability during Laser Beam Welding with Beam Oscillation and Wire Feed

Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

Sheet Metal Profiles with Variable Height: Numerical Analyses on Flexible Roller Beading

Post-Weld Heat Treatment Effects on Mechanical Properties and Microstructure of AA6061-T6 Butt Joints Made by Friction Stir Welding at Right Angle (RAFSW)

In-Situ Fretting Wear Analysis of Electrical Connectors for Real System Applications

Effect of Deformation Path on the Microstructure and Mechanical Behavior of TWIP980 Steel

Laser Surface Structuring of Cemented Carbide for improving the Strength of Induction Brazed Joints

Friction Stir Welding of T-Joints: Experimental and Statistical Analysis

Metallurgical Analysis of Chip Forming Process when Machining High Strength Bainitic Steels

High Speed Roll-to-Roll Printable Transistor Enabled by a Pulsed Light Curable CNT Ink

Microstructural Characterization of Shrouded Plasma-Sprayed Titanium Coatings？

Development of Steps in an Automated Process Chain for Piezoceramic-Metal Compound Production

Towards Optimization of μ-Injection Molding Process for a New V-Shaped Geometrical Component Using X-ray CT-Based Quality Characterization

Experimental and Numerical Investigation of the Influence of Process Parameters in Incremental Sheet Metal Forming on Residual Stresses

Thin-Rib and High Aspect Ratio Non-Stochastic Scaffolds by Vacuum Assisted Investment Casting

Finite Element Modeling and Mechanical Testing of Metal Composites Made by Composite Metal Foil Manufacturing

Effect of Graphene on Machinability of Glass Fiber Reinforced Polymer (GFRP)

Precision Core Temperature Measurement of Metals Using an Ultrasonic Phase-Shift Method

Fabrication of Demineralized Bone Matrix/Polycaprolactone Composites Using Large Area Projection Sintering (LAPS)

An Investigation of the Influence of a Micro-Textured Ball End Cutter’s Different Parameters on the Surface Residual Stress of a Titanium Alloy Workpiece

Enhancing Signal Quality of Capacitive Displacement Measurements in Machine Tool Environments？

Fabrication of Piezoelectric Composites Using High-Temperature Dielectrophoresis

Influence of Magnesium on Spatter Behavior in Laser Deep Penetration Welding of Aluminum Alloys

Analytical and Simulation-Based Prediction of Surface Roughness for Micromilling Hardened HSS

Comparative Assessment of the Surface Integrity of AD730？ and IN718 Superalloys in High-Speed Turning with a CBN Tool

Interplay of Process Variables in Magnetic Abrasive Finishing of AISI 1018 Steel Using SiC and Al2O3 Abrasives

Finite Element Modeling of Orthogonal Machining of Brittle Materials Using an Embedded Cohesive Element Mesh

Transient Powder Melting in SLM Using an Analytical Model with Phase Change and Spherical Symmetry in a Semi-Infinite Medium

Automated Unsupervised 3D Tool-Path Generation Using Stacked 2D Image Processing Technique

Balancing WAAM Production Costs and Wall Surface Quality through Parameter Selection: A Case Study of an Al-Mg5 Alloy Multilayer-Non-Oscillated Single Pass Wall

Development of an Additive Manufacturing System for the Deposition of Thermoplastics Impregnated with Carbon Fibers？

A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics

Phase Change with Density Variation and Cylindrical Symmetry: Application to Selective Laser Melting

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705