全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用：99美元
投递稿件

为什么选择我们？ >>
- 开源期刊
- 同行审议
- 快速出刊
- 终身存储
- 免费检索
- 免费推广
- 更多...
- 搜索引擎

西安交通大学学报

ISSN Print: 0253-987X

ISSN Online:

主页: http://zkxb.xjtu.edu.cn/

分享:




Go

注排液式砂轮在线动平衡技术研究
Liquid Injection and Drainage Online Dynamic Balancing Technique for Grinding Wheel

张西宁,刘旭,吴婷婷

仿生翼几何特征与气动性能的关系初探
Study on the Relationship Between Geometric Features and Aerodynamic Performance of Bionic Wings

李丹宇,刘小民,李典

离子液体型离子聚合物金属复合材料的 封装及变形性能
A Packaging Technology and Drive Stability of Ionic Polymer？？Metal Composite Materials Based on Ionic Liquid Type Electrolyte Layer

罗斌,朱子才,陈花玲,王延杰

动静压柔性铰链可倾瓦轴承的阶跃载荷动态响应
Dynamic Response of Hybrid Flexure Pivot-Tilting Pad Bearing to Step Loads

李昊,陈淑江,马金奎,路长厚

蒸汽冷却厚壁通道传热性能的耦合传热研究
Conjugate Calculation of Heat Transfer Performance of a Steam Cooled Thick？？Wall Ribbed Channel

席雷,徐亮,高建民,赵振,王明森

正/负电场对预混稀燃火焰影响的对比研究
Comparative Research on Effect of Positive/Negative Electric Field on Premixed Lean Burn Flame

魏旭星,贾伟东,侯俊才,李一鸣,李超,吴筱敏

双螺杆制冷压缩机气流脉动衰减器的研究与开发
Development of Gas Pulsation Damping Device for Twin Screw Refrigeration Compressor

武晓昆,陈文卿,周明龙,杨侨明,邢子文

机床支承件螺栓连接布局设计方法研究
Bolted Connections Layout Design for Machine Tool Support Part

盛晓茜,朱林波,洪军,屈云鹏

缠绕管式换热器结构参数多目标优化 数值模拟研究
Multi-Objective Optimization on the Structural Parameters of Spiral Wound Heat Exchanger

王斯民,简冠平,肖娟,王家瑞,文键

纳米多孔结构单晶硅热电薄膜 声子热导率数值研究
Numerical Study on the Phonon Thermal Conductivity of Nano？？Structured Single-Crystal Silicon Thermoelectric Thin Film

毕成,唐桂华,傅博

概念设计阶段机床基础大件质量的优化方法
Mass Optimization of Large Machine Tool Components in Conceptual Design

陈以磊,邱志惠,郭俊康,洪军,刘志刚

单液膜气泡聚并和连接过程的 移动粒子半隐式法数值模拟
Numerical Simulation of Moving Particle Semi？？Implicit Method for Single？？Film Bubbles Coalescence and Connection

倪妮,孙中国,陈啸,席光

3-PPSR柔性并联机器人力控制研究
A Force Control Strategy for 3？？PPSR Flexible Parallel Robots

栾玉亮,荣伟彬,吴方勇,孙立宁

回流式两级分离轴流旋风分离器性能实验研究
Experiment for Partial Reflux Axial？？Flow Cyclone Separator with Two？？Stage Separation

刘碧媛,冯健美,夏宗飞,畅云峰,彭学院

针板电极下局部放电对油浸绝缘纸板表面的影响
Influence of Partial Discharge on Oil？？Impregnated Insulation Pressboard Surface

崔彦捷,彭平,曹沛,祝令瑜,邓军波,汲胜昌

高效支持负载聚合的程序资源 敏感度获取及分析方法
A Method for Acquiring and Analyzing Program Resource Sensitivity for Workload Consolidation

王琳,钱德沛,王锐,栾钟治,魏光

颗粒流润滑力链演变及动力学状态的研究
Research on the Force Chain Evolution and Dynamic State of Granular Flow Lubrication

孟凡净,刘？j,秦涛

重型柴油机固态铵选择性催化还原系统 铵盐热解及动力学特征研究
Pyrolysis and Kinetic Characteristics of Ammonium Salt in Solid？？State Ammonium SCR System for Heavy Duty Diesel Engine

范鲁艳,汪安东,曲大为,马军彦

旋转半径和叶片安装角对动叶旋流冷却 流动和传热特性的影响
Influences of Rotating Radius and Blade Setting Angle on Rotor Vortex Cooling Flow and Heat Transfer Characteristics

杜长河,范小军,李亮,丰镇平

柴油引燃直线氢内燃机稀薄燃烧特性研究
Diesel Pilot？？Ignited Lean Combustion Characteristics of a Linear Hydrogen Engine

杨振中,秦朝举,张卫正,原彦鹏,宋立业

聚甲氧基二甲醚及其高比例掺混柴油混合燃料 发动机燃烧与排放的试验研究
Investigation of Engine Combustion and Emission Performance Fuelled with Neat PODE and PODE/Diesel Blend

谢萌,马志杰,王全红,刘建超,刘圣华

可倾瓦导轴承液膜力非线性指数模型及应用研究
Exponential Model of Nonlinear Liquid？？Film Force of Tilting？？Pad Guide Bearing and Its Application

张帆,金英泽,王祥,奚延辉,袁小阳

污水处理过程的多目标优化
Multi？？Objective Optimization of Wastewater Treatment Plant

罗健旭,彭培培,徐颖,余昭旭

应用智能可视化优化方法确定 催化重整的优化操作区域
Determination of Catalytic Reforming Optimal Operation Region Based on Intelligent Visualization Optimization Method

熊佐松,黄辉,陈春锋,孙珊珊,马萌宏,史彬,鄢烈祥

采用荧光光纤检测局部放电的自适应阈值方法
Adaptive Threshold Method for Partial Discharge Detection by Fluorescent Fiber

李威,鲁华祥,陈天翔,陈刚

众筹项目的社交网络影响力预测与分析
Prediction and Analysis of Social Influence for Crowdfunding Projects

杨扬,Chun-Ta LU,王菲菲,许进,Philip S. YU

Buck变换器的自适应终端滑模控制策略
Adaptive Control Method of Terminal Sliding Mode with Double Loop for Buck Converters

汪建林,续丹,周欢,鲁伟

新型热处理工艺对搅拌摩擦焊接头性能的影响
Effects of a New Post-Weld Heat Treatment Process on the Properties of Friction Stir Welded Joints

戴明亮,万心勇,彭熠,胡志力

平板冲击发散冷却流动与换热特性的数值模拟
5Numerical Simulation for Flow and Heat Transfer Characteristics of Impingement/Effusion Cooling on a Flat Plane

费昕阳,王新军,陆海空

离心压缩机级通流与盘盖侧泄漏流的耦合分析
Coupling Analysis between Through Flow and Hub？？Shroud Side Leakage Flow of a Centrifugal Compressor Stage

王晟？F,琚亚平,张楚华

面向变矩器设计性能的平面流模型选用方法
A Method of Selecting Planar Flow Model for the Design Performance of Torque Convertors

李文嘉,王安麟,曹岩,李晓田,张庆武

锂电池分数阶建模与荷电状态研究
Fractional Model and State？？of？？Charge of Lithium Battery

鲁伟,续丹,杨晴霞,周阳

一种类螺纹孔结构的旋转射流换热特性数值模拟
Heat Transfer Characteristics Research of Screw Thread Swirling Impinging Jets Based on Numerical Simulation Method

徐亮,兰进,高建民,李云龙

压缩机舌簧排气阀运动模型对比及 动态特性影响因素分析
Comparison of Motion Models of Reciprocating Compressor Discharge Reed Valve and Analysis for Factors Affecting Dynamic Characteristics

慕光宇,王枫,米小珍

烟气余热回收换热器积灰抑制技术研究及参数优化
Numerical Study and Parameter Optimization for Suppressing Ash Deposition in Flue Gas Heat Exchanger

汤松臻,王飞龙,童自翔,何雅玲

采用双毛细管等流量法测量 航空煤油RP-3的动力黏度
Viscosity Measurement of Aviation Kerosene RP？？3 Using a Double？？Capillary Viscometer with Equal Mass Flow

冯松,毕勤成,刘朝晖,潘辉,曹冬冬

多路温度同步测量系统开发与实现
Development and Realization of a Multi？？Channel Synchronous Temperature Measurement System

付远明,孟现阳,吴江涛

铜基石墨密封材料的摩擦磨损性能研究
Investigation into Friction and Wear Behaviors of Copper？？Based Graphite Seal Material

张鹏鹏,赵伟刚,董光能

涡发生器高度对气膜冷却性能影响的实验研究
Experimental Investigation for Effects of Vortex Generator Height on Film Cooling Property

张超,宋英杰,宋立明,李军,丰镇平

一种具备自动增益控制功能的宽带正交解调器
A Wideband Orthogonal Demodulator with Auto Gain Control

黄水根,林敏,陈静,罗杰馨,杨根庆

大预旋下离心压缩机进口结构与 导叶掠角的改进研究
Improvements of Inlet Structure and Sweep？？Angle of Guide Vane Inside a Centrifugal Compressor at Large Pre？？Swirl

赵家毅,王志恒,席光,赵阳

弯曲通道中凸、凹表面水膜流动特性的数值研究
Numerical Investigation for Wall Film Flow Behaviors on Convex and Concave Surfaces of Curved Channel

王杰枫,范小军,李森,张翔,李亮

叶栅气动反问题的伴随优化解法及应用
Adjoint Optimization Method for Aerodynamic Inverse Problem of Cascades

朱玉杰,琚亚平,戴韧,张楚华

考虑处理机时间窗口的可分任务调度优化模型
An Optimization Model for Divisible？？Load Scheduling Considering Processor Time？？Window

赖俊凡,王宇平,王晓丽

有刷直流电机自适应滑模控制器设计与实验
Design and Experiments on the Adaptive Sliding Mode Controller of Brushed DC Motor∶Assessment

顾万里,胡云峰,张森,陈虹

辐射供冷空调系统下的人体热舒适性研究
Investigation on Human Body Thermal Comfort under Radiative Cooling Air Conditioning System

高松,赵民,李扬,王宇昂,孟祥兆,顾兆林,金立文

采用仿射迭代最近点的晶圆分割方法
A Wafer Segmentation Method Using the Closest Affine Iterative Point

杨静,尚夏,荣海军,杜少毅

几何参数对三维仿生运动翼推进性能的影响研究
Influences of Geometric Parameters on the Propulsion Performance of Three？？Dimensional Bionic Motion Wings

陈刚,苑宗敬,张鸿志,韩佳坤,龚春林

滑移区稀薄气体外掠圆柱体换热的数值分析
Numerical Analysis for Forced Convection Heat Transfer of Rarefied Gas Across Circular Cylinder in Slip Flow Region

王鑫宝,厉彦忠,谢福寿,王娇娇,王磊

DS-CDMA系统多波形优化的多址干扰抑制方法
A Multi-Address Interference Suppression Method with Multiple Waveform Optimization for DS-CDMA Systems

李清伟,郭黎利

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705