All Title Author
Keywords Abstract

CCS Membrane Development at CIUDEN’s Technology Development Centre for CO2 Capture

DOI: 10.4236/jpee.2018.612001, PP. 1-16

Keywords: CCS, Membrane, Carbon Capture, Oxy-Fuel, CIUDEN

Full-Text   Cite this paper   Add to My Lib


CO2 concentration to the atmosphere has risen faster than ever in the last century. This is highly due to fossil fuel combustion which is the major anthropogenic CO2 source. Membrane technology is an important alternative for reliability, flexibility and economically competitiveness for Carbon Capture and Storage (CCS) processes. The use of membranes has applicability to CCS technologies mainly for CO2, O2 or H2 separation, although most of the membrane studies for CO2/O2 production have been carried out at laboratory scale and will require a step further for commercial scale. This paper will present current membranes R & D needs when applied to CCS systems and CIUDEN capabilities for membrane technological development and testing under real conditions. It covers from O2 separation membrane integration in the process, and applied to the oxy-combustion CO2 capture, to post-combustion technologies for membrane CO2 separation, tested under real conditions or H2 production catalytic-membranes through gasification. At CIUDEN CCS facility important membrane evaluations can be carried out for the module integration, testing of materials performance and behavior under real conditions.


[1]  International Energy Agency (2009) World Energy Outlook.
[2]  Hagedoorn, S. (2007) Transportation of CO2, International Interdisciplinary Summer School, on CCS2007: Munich, Germany, 19-24 August.
[3]  Bredesen, R., Jordal, K. and Bolland, O. (2004) High-Temperature Membranes in Power Generation with CO2 Capture. Chemical Engineering and Processing, 43, 1129-1158.
[4]  Freeman, B.D. (1999) Basis of Permeability/Selectivity Tradeoff Relations in Polymeric Gas Separation Membranes. Macromolecules, 32, 375-380.
[5]  Koros, W.J., Coleman, M.R. and Walker, D.R.B. (1992) Controlled Permeability Polymer Membranes. Annual Review of Materials Science, 22, 47-89.
[6]  Kloster, R. (1998) Thermodynamische Analyse und Optimierung von Gas-, Dampfturbinen-Kombi-Kraftwerken mit integrierter Kohlevergasung. Dissertation, Fortschritt-Berichte VDI, Nr. 409, Reihe 6, Energietechnik.
[7]  Marano, J.J. and Cifinero, J.P. (2009) Integration of Gas Separation Membranes with IGCC Identifying the Right Membrane for the Right Job. Energy Procedia, 1, 361-368.
[8]  Armstrong, P.A., Bennett, D.L., Foster, E.P. and Stein, E.E. (2005) ITM Oxygen: The New Oxygen Supply for the New IGCC Market. Gasification Technologies 2005, San Francisco, CA, 9-12 October 2005.
[9]  Davidson, O. and Metz, B. (2005) Special Report on Carbon Dioxide Capture and Storage. International Panel on Climate Change, Geneva.
[10]  Alamo, G., Hart, A., Grimshaw, A. and Lundstrøm, P. (2012) Characterization of Syngas Produced from MSW Gasification at Commercial-Scale ENERGOS Plants. Waste Management, 32, 1835-1842.
[11]  Couto, N., Roubo, N., Silva, V., Monteiro, E. and Bouziane, K. (2013) Influence of the Biomass Gasification Processes on the Final Composition of Syngas. Energy Procedia, 36, 596-606.
[12]  ZEP, Report on Long Term R&D Priorities for CCS Capture, 2013.


comments powered by Disqus

Contact Us


微信:OALib Journal