The Design of Experiments (DOE) approach is a way of applying statistics to experimentation in a methodical manner. Because experimenting is so common in industries, most engineers (and scientists) end up analyzing their trials with statistics. Although there is a general set of rules and processes for performing the design of experiments (DOE), the literature lacks a recommended course of action for identifying and selecting the optimal design of experiments from a vast number of viable designs. As a result, the primary goal of this project is to evaluate four manufacturing methods, namely injection molding, extrusion, vacuum-assisted resin transfer molding, and 3D printing. Each process’s input and output parameters have been examined out of which four input parameters and four output parameters of every process have been chosen to evaluate them by altering their characteristics and determining the significance of the processes using “Minitab” ANOVA analysis. This will aid future perception of the optimization function employed in statistical analysis.
Cite this paper
Tirupathi, M. B. , Shaik, Y. P. and Schuster, J. (2024). Comparison of DOE Programs. Open Access Library Journal, 11, e1200. doi: http://dx.doi.org/10.4236/oalib.1111200.
Gibson, I., Rosen, D. and Stucker, B. (2010) Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. Springer, Berlin, 1-18.
https://doi.org/10.1007/978-1-4419-1120-9
Lee, C.S., Kang, M.K. and Kim, H.S. (2019) Study on Optimization of Injection Molding Process for Reduction of Weld Line in Thin Shell Parts. Materials Today Communications, 20, Article ID: 100566.
Meng, L., Wang, Y. and Li, L. (2021) Smart Injection Molding: A Comprehensive Review of Research and Applications. Journal of Manufacturing Processes, 67, 856-878.
Tao, W., Kusiak, A. and Li, Y. (2018) A Data-Driven Approach to Energy Efficiency in Injection Molding Processes. Journal of Manufacturing Science and Engineering, 140, Article ID: 071012.
Gao, H., Zhang, Y., Zhou, X., et al. (2018) Intelligent Methods for the Process Parameter Determination of Plastic Injection Molding. Frontiers of Mechanical Engineering, 13, 85-95. https://doi.org/10.1007/s11465-018-0491-0
Ferris, T. and Young, B. (2018) Effect of Mold Temperature on Mechanical and Physical Properties. 2018 Society of Plastics Engineers Annual Technical Conference, ANTEC 2018, Orlando, 7-10 May 2018.
Chen, W.-C. and Nguyen, M.-H. (2016) Optimization of the Plastic Injection Molding Process Using the Taguchi Method, RSM, and Hybrid GA-PSO. The International Journal of Advanced Manufacturing Technology, 83, 1873-1886.
https://doi.org/10.1007/s00170-015-7683-0
Farotti, E. and Natalini, M. (2018) Injection Molding. Influence of Process Parameters on Mechanical Properties of Polypropylene Polymer. A First Study. Procedia Structural Integrity, 8, 256-264. https://doi.org/10.1016/j.prostr.2017.12.027
Liao, S.J., Hsieh, W.H., Wang, J.T. and Su, Y.C. (2004) Shrinkage and Warpage Prediction of Injection-Molded Thin-Wall Parts Using Artificial Neural Networks. Polymer Engineering and Science, 44, 2029-2040. https://doi.org/10.1002/pen.20206
Kale, H.P. and Hambire, U.V. (2015) Review on Optimization of Injection Molding Process Parameter for Reducing Shrinkage of High Density Polyethylene (HDPE) Material. International Journal of Science and Research, 4, 2847-2850.
Singh, G., Pradhan, M.K. and Verma, A. (2018) Multi Response Optimization of Injection Moulding Process Parameters to Reduce Cycle Time and Warpage. Materials Today: Proceedings, 5, 8398-8405. https://doi.org/10.1016/j.matpr.2017.11.534
Lakshmi, K., Manamalli, D. and Rafiq, M. (2014) Design of Multimodel Based MPC and IMC Control Schemes Applied to Injection Molding Machine. International Journal of Engineering & Technology, 3, 82-92.
https://doi.org/10.14419/ijet.v3i2.1844
Karimi-Maleh, H. and Malekfar, R. (2020) Extrusion as a Green and Sustainable Technology for the Production of Bio-Based Materials. Polymers, 12, Article No. 2701.
Kalyon, D., Lu, G., Yilgor, I. and Yilgor, E. (2003) Rheology and Extrusion of Medical-Grade Thermoplastic Polyurethane. Polymer and Engineering Science, 43, 1863-1877.
Boparai, K.S., Singh, R. and Singh, H. (2016) Modeling and Optimization of Extrusion Process Parameters for the Development of Nylon6-Al-Al2O3 Alternative FDM Filament. Progress in Additive Manufacturing, 1, 115-128.
https://doi.org/10.1007/s40964-016-0011-x
Shenzhen Rapid Direct Co., Ltd. (2004) What Is Plastic Extrusion: A Definitive Process Guide. https://www.rapiddirect.com/blog/plastic-extrusion-process/
Yang, T.-C. (2018) Effect of Extrusion Temperature on the Physi-Co-Mechanical Properties of Unidirectional Wood Fiber-Reinforced Polylactic Acid Composite (WFRPC) Components Using Fused Deposition Modeling. Polymers, 10, Article No. 976. https://doi.org/10.3390/polym10090976
Jones, R. (2002) Design and Analysis of Experiments (Fifth Edition), Douglas Montgomery, John Wiley and Sons, 2001, 684 Pages, £33.95. Quality and Reliability Engineering International, 18, 163. https://doi.org/10.1002/qre.458
GáLvez, J., et al. (2020) Effect of Extrusion Screw Speed and Plasticizer Proportions on the Rheological, Thermal, Mechanical, Morphological and Superficial Properties of PLA. Polymers, 12, Article No. 2111. https://doi.org/10.3390/polym12092111
Bhattacharya, S. and Choudhury, G.S. (1994) Twin-Screw Extrusion of Rice Flour: Effect of Extruder Length-to-Diameter Ratio and Barrel Temperature on Extrusion Parameters and Product Characteristics. Journal of Food Processing and Preservation, 18, 389-406. https://doi.org/10.1111/j.1745-4549.1994.tb00261.x
Pan, H. and Sun, X.S. (2003) Effects of Moisture Content and Extrusion Parameters on Tensile Strength of Starch and Poly(Lactic Acid) Blends. Applied Engineering in Agriculture, 19, 573-579. https://doi.org/10.13031/2013.15307
Toshimitsu, M., Okubo, H., Yao, S. and Matsukuma, Y. (2023) Analysing the Relationship between Mechanical Properties and Inner Structure of LLDPE Virgin Film for Optimizing Extrusion Condition. Journal of Chemical Engineering of Japan, 56, Article ID: 2172979. https://doi.org/10.1080/00219592.2023.2172979
Qamar, S.Z., Pervez, T. and Chekotu, J.C. (2018) Die Defects and Die Corrections in Metal Extrusion. Metals, 8, Article No. 380. https://doi.org/10.3390/met8060380
Kumar, A. and Kumar, D. (2022) Vacuum Assisted Resin Transfer Moulding Process Review and Variability Analysis Using Taguchi Optimization Technique. Materials Today: Proceedings, 50, 1472-1479. https://doi.org/10.1016/j.matpr.2021.09.055
Hsiao, K. and Heider, D. (2012) Vacuum Assisted Resin Transfer Molding (VARTM) in Polymer Matrix Composites. In: Advani, S.G. and Hsiao, K.-T., Eds., Manufacturing Techniques for Polymer Matrix Composites (PMCs), Elsevier, Berlin, 310-347. https://doi.org/10.1533/9780857096258.3.310
Ngo, T.D., Kashani, A., Imbalzano, G., Nguyen, K.T.Q. and Hui, D. (2018) Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges. Composites Part B: Engineering, 143, 172-196.
https://doi.org/10.1016/j.compositesb.2018.02.012
Flower, H. (1997) An Introduction to Composite Materials—Second Edition D. Hull and T.W. Clyne Cambridge University Press, the Pitt Building, Trumpington Street, Cambridge CB2 IRP. 1996. 326 pp. Illustrated. £19.95. Journal of the Royal Aeronautical Society, 101, 228. https://doi.org/10.1017/S0001924000066410
Kubá?, L. and Kodym, O. (2017) The Impact of 3D Printing Technology on Supply Chain. MATEC Web of Conferences, 134, Article No. 00027.
https://doi.org/10.1051/matecconf/201713400027
Shaik, Y.P., Schuster, J., Katherapalli, H.R. and Shaik, A. (2022) 3D Printing under High Ambient Pressures and Improvement of Mechanical Properties of Printed Parts. Journal of Composites Science, 6, Article No. 16.
https://doi.org/10.3390/jcs6010016
Pipalla, R., Schuster, J. and Shaik, Y.P. (2021) Experimental Analysis on 3D Printed Onyx Specimens with Honeycomb Infill Structure. Journal of Advanced Material Science Engineering, 1, 1-10. https://doi.org/10.33425/2771-666X.1003
Shaik, Y.P., Schuster, J. and Shaik, A. (2021) A Scientific Review on Various Pellet Extruders Used in 3D Printing FDM Processes. Open Access Library Journal, 8, 1-19. https://doi.org/10.4236/oalib.1107698
Shaik, Y.P., Schuster, J. and Chowdary, R. (2020) Impact of 3D Printing Patterns and Post-Consolidation Pressure on Mechanical Properties of FDM Printed Samples. American Research Journal of Materials Science, 2, 1-10.
Gibson, I., Rosen, D. and Stucker, B. (2015) Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing. Springer, Berlin.
https://doi.org/10.1007/978-1-4939-2113-3
Ambade, V.V., Rajurkar, S.W. and Awari, G.K. (2023) Optimization of Process Parameters Affecting Performance of Part Characteristics in Fused Deposition Modeling (FDM) 3D Printing: A Critical Review. AIP Conference Proceedings, 2800, Article ID: 020072. https://doi.org/10.1063/5.0162925
Hopkinson, N., Hague, R. and Dickens, P. (2006) Introduction to Rapid Manufacturing. In: Hopkinson, N., Hague, R.J.M. and Dickens, P.M., Eds., Rapid Manufacturing: An Industrial Revolution for the Digital Age, John Wiley & Sons Ltd., Hoboken, 1-4. https://doi.org/10.1002/0470033991.ch1
Bourell, D., Kruth, J.P., Leu, M., Levy, G., Rosen, D., Beese, A.M. and Clare, A. (2017) Materials for Additive Manufacturing. CIRP Annals, 66, 659-681.
https://doi.org/10.1016/j.cirp.2017.05.009
Al-Ahmari, A., et al. (2019) Evaluation of Additive Manufacturing Technologies for Dimensional and Geometric Accuracy. International Journal of Materials and Product Technology, 58, 129-154. https://doi.org/10.1504/IJMPT.2019.10018139
Ahn, S., Montero, M., Odell, D., Roundy, S. and Wright, P.K. (2002) Anisotropic Material Properties of Fused Deposition Modeling ABS. Rapid Prototyping Journal, 8, 248-257. https://doi.org/10.1108/13552540210441166
Ali, M.H., Abilgaziyev, A. and Adair, D. (2019) 4D Printing: A Critical Review of Current Developments, and Future Prospects. The International Journal of Advanced Manufacturing Technology, 105, 701-717.
https://doi.org/10.1007/s00170-019-04258-0
Myers, R.H. and Montgomery, D.C. (2002) Response Surface Methodology: Process and Product Optimization Using Designed Experiments. John Wiley & Sons, Hoboken.
Surace, R., et al. (2014) Dimensional Accuracy Investigation of Injection Moulded Micro Features. Proceeding of ICOMM, 26-28.
https://www.researchgate.net/profile/gianluca-trotta-4/publication/265913422_dimensional_accuracy_investigation_of_injection_moulded_micro_features/links/59dbd144aca2728e201830c2/dimensional-accuracy-investigation-of-injection-moulded-micro-features.pdf
Zamani, H., et al. (2013) Warpage Characterization of Thin and Centrally-Gated Injection Molded Part by Applying Cavity Pressure Measurement. Applied Mechanics and Materials, 446-447, 1099-1103.
https://www.scientific.net/amm.446-447.1099
https://doi.org/10.4028/www.scientific.net/AMM.446-447.1099
Hyie, K.M., Budin, S. and Wahab, M. (2019) Effect of Injection Moulding Parameters in Reducing the Shrinkage of Polypropylene Product Using Taguchi Analysis. IOP Conference Series: Materials Science and Engineering, 505, Article ID: 012060.
https://iopscience.iop.org/article/10.1088/1757-899x/505/1/012060/meta
https://doi.org/10.1088/1757-899X/505/1/012060
Thiry, J., Krier, F. and Evrard, B. (2015) A Review of Pharmaceutical Extrusion: Critical Process Parameters and Scaling-Up. International Journal of Pharmaceutics, 479, 227-240. https://doi.org/10.1016/j.ijpharm.2014.12.036
Modugu, S.C.R., Schuster, J. and Shaik, Y.P. (2022) Synthesis and Characterization of Carbon Fiber Nanocomposite Using Titanium Dioxide and Silicon Carbide Nanomaterials. Journal of Composites Science, 6, Article No. 312.
https://doi.org/10.3390/jcs6100312
Shaik, Y.P., Schuster, J. and Naidu, N.K. (2023) High-Pressure FDM 3D Printing in Nitrogen [Inert Gas] and Improved Mechanical Performance of Printed Components. Journal of Composites Science, 7, Article No. 153.
https://doi.org/10.3390/jcs7040153
Stewardson, D. (2001) Design and Analysis of Experiments Design and Analysis of Experiments 5th Ed by Douglas C Montgomery 2001, John Wiley, New York. Hard-Bound, 684 pp ISBN 0471316490. MSOR Connections, 1, 15-16.
https://doi.org/10.11120/msor.2001.01010015a
Shaik, Y.P., Schuster, J., Seemala, S. and Naidu, N.K. (2022) 3D Printing in High Ambient Pressure and Analysis of Parts Printed with Minimum or No Base Support. SSRG International Journal of Polymer and Textile Engineering, 9, 17-24.
https://doi.org/10.14445/23942592/IJPTE-V9I2P103
Murugan, R., Mitilesh, R.N. and Singamneni, S. (2019) Influence of Process Parameters on the Mechanical Behaviour and Processing Time of 3D Printing. The International Journal of Modern Manufacturing Technologies, 1, 21-27.
Wang, Y.Q., et al. (2021) Mechanical Properties of Fused Filament Fabricated PEEK for Biomedical Applications Depending on Additive Manufacturing Parameters. Journal of the Mechanical Behavior of Biomedical Materials, 115, Article ID: 104250.
https://doi.org/10.1016/j.jmbbm.2020.104250
https://www.sciencedirect.com/science/article/abs/pii/s175161612030789x
El Magri, A., et al. (2020) Optimization of Printing Parameters for Improvement of Mechanical and Thermal Performances of 3D Printed Poly(Ether Ether Ketone) Parts. Journal of Applied Polymer Science, 137, 49087.
https://doi.org/10.1002/app.49087
Strano, M., Rane, K., Herve, G. and Tosi, A. (2019) Determination of Process-Induced Dimensional Variations of Ceramic Parts, 3D Printed by Extrusion of a Powder-Binder Feedstock. Procedia Manufacturing, 34, 560-565.
https://www.sciencedirect.com/science/article/pii/s2351978919309503
https://doi.org/10.1016/j.promfg.2019.06.220
Alsoufi, M.S. and Elsayed, A.E. (2018) Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer. Materials Sciences and Applications, 9, 11-40. https://doi.org/10.4236/msa.2018.91002
Salem, I.H. (2022) Multi-Objective Optimization on Dimensional Accuracy, Edge and Surface Quality of 3D-Printed Parts by Fused Deposition Modelling. Master’s Thesis, The American University, Cairo. https://fount.aucegypt.edu/etds/1881/
Elkaseer, A., Schneider, S. and Scholz, S.G. (2020) Experiment-Based Process Modeling and Optimization for High-Quality and Resource-Efficient FFF 3D Printing. Applied Sciences, 10, Article No. 2899.
https://www.mdpi.com/2076-3417/10/8/2899
https://doi.org/10.3390/app10082899
Smith, D.M., et al. (2018) Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule. International Journal of Pharmaceutics, 544, 21-30. https://www.sciencedirect.com/science/article/abs/pii/s0378517318302035
https://doi.org/10.1016/j.ijpharm.2018.03.056
Singh, J., Goyal, K.K., Kumar, R. and Gupta, V. (2022) Influence of Process Parameters on Mechanical Strength, Build Time, and Material Consumption of 3D Printed Polylactic Acid Parts. Polymer Composites, 43, 5908-5928.
https://doi.org/10.1002/pc.26849