Properties of hemp fibre reinforced
unsaturated polyester composites following exposure to accelerated weathering
conditions have been studied. Exposure to ultraviolet (UV) radiation and UV radiation plus
condensation resulted in immediate loss in weight which stabilised following
prolonged exposure times. The same exposure led to initial decline in tensile
properties of hemp fibre composites, but the decline in properties also
stabilised following prolonged exposure and these materials seemed to perform
fairly well in these conditions. The decline in strength and modulus was quite
similar, unlike immersion in water where the reduction in modulus was more
pronounced than the reduction in strength. Discolouring of composites following
exposure to these conditions was identified as an issue with these composites.
Cite this paper
Shahzad, A. (2014). Accelerated Weathering Properties of Hemp Fibre Composites. Open Access Library Journal, 1, e606. doi: http://dx.doi.org/10.4236/oalib.1100606.
Mohanty, A.K., Misra, M. and Hinrichsen, G. (2000) Biofibres, Biodegradable Polymers and Biocomposites: An Overview. Macromolecular Materials and Engineering, 276-277, 1-24. http://dx.doi.org/10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W
Zou, P., Xiong, H. and Tang, S. (2009) Natural Weathering of Rape Straw Flour (RSF)/HDPE and Nano-SiO2/RSF/ HDPE Compo-sites. Carbohydrate Polymers, 73, 378-383. http://dx.doi.org/10.1016/j.carbpol.2007.12.002
Fabiyi, J.S. and McDonald, A.G. (2010) Effect of Wood Species on Property and Weathering Performance of Wood Plastic Composites. Composites Part A, 41, 1434-1440. http://dx.doi.org/10.1016/j.compositesa.2010.06.004
Stark, N.M. and Matuana, L.M. (2006) Influence of Photostabilizers on Wood Flour-HDPE Composites Exposed to Xenon-Arc Radiation with and without Water Spray. Polymer Degradation and Stability, 91, 3048-3056. http://dx.doi.org/10.1016/j.polymdegradstab.2006.08.003
Du, H., Wang, W., Wang, Q., Sui, S., Zhang, Z. and Zhang, Y. (2010) Effects of Pigments on the Ultraviolet Degradation of Wood Flour/HDPE Composites. Journal of Applied Polymer Science, 118, 1068-1076.
Butylina, S., Hyvarinen, M. and Karki, T. (2012) A Study of Surface Changes of Wood-Polypropylene Composites as the Result of Exterior Weathering. Polymer Degradation and Stability, 97, 337-345. http://dx.doi.org/10.1016/j.polymdegradstab.2011.12.014
Mehta, G., Mohanty, A.K., Drzal, L.T., Kamdem, D.P. and Misra, M. (2006) Effect of Accelerated Weathering on Biocomposites Processed by SMC and Compression Moulding. Journal of Polymers and Environment, 14, 359-368. http://dx.doi.org/10.1007/s10924-006-0029-0