All Title Author
Keywords Abstract

Publish in OALib Journal
ISSN: 2333-9721
APC: Only $99

ViewsDownloads

Relative Articles

Influence of Nano-Modification on the Interlaminar Shear Strength of Unidirectional Glass Fiber-Reinforced Epoxy Resin

Investigation of the Flexural Properties and Failure Behavior of Unidirectional CF/Nylon 6 and CF/Epoxy Composites

Optical Fiber Embedded in Epoxy Glass Unidirectional Fiber Composite System

Mechanical and falling weight impact properties of unidirectional phormium fibre/epoxy laminates

单向碳纤维/环氧树脂预浸料热解特性
Pyrolysis characteristics of unidirectional carbon fiber/epoxy prepreg

PP/GMT片材骨架材料——玻纤毡

单向连续碳纤维-玻璃纤维层间混杂增强环氧树脂基复合材料的力学性能
Mechanical properties of unidirectional carbon fiber-glass fiber hybrid reinforced epoxy composites in interlaminar layer

Application of the Experiment Design Method in Modelling the Temperature Effect on the Behaviour at a Low Velocity Impact Damage of Epoxy Matrix Reinforced with Unidirectional Carbon Fiber Composite

静电植绒法处理多壁碳纳米管改性玻纤织物/环氧树脂复合材料的制备及力学性能
Preparation and mechanical properties of MWCNTs modified glass fiber fabrics/epoxy composites disposed by electrostatic flocking method

孔隙微观特征对碳纤维/环氧树脂复合材料横向拉伸强度的影响
Influence of void micro-characteristics on transverse tensile strength of unidirectional carbon fiber/epoxy resin composites

碳纤维-玻璃纤维层内混杂单向增强环氧树脂复合材料拉伸性能
Tensile properties of unidirectional carbon fiber-glass fiber hybrid reinforced epoxy composites in layer

More...
-  2017 

单向碳纤维增强树脂基复合材料的超低温力学性能
Cryogenic mechanical properties of unidirectional carbon fiber reinforced epoxy composite

DOI: 10.13801/j.cnki.fhclxb.20170224.001

Keywords: 碳纤维,复合材料,超低温,力学性能,微观特征,变化机制
carbom fiber
,composites,cryogenic,mechanical properties,microscopic characteristics,change mechanism

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]  NAIR A, ROY S. Modeling of permeation and damage in graphite/epoxy laminates for cryogenic tanks in the presence of delaminations and stitch cracks[J]. Composites Science and Technology, 2007, 67(11-12):2592-2605.
[2]  KUMAR M S, SHARMA N, RAY B C. Structural integrity of glass/polyester composites at liquid nitrogen temperature[J]. Journal of Reinforced Plastics and Composites, 2009, 28(11):1297-1304.
[3]  TAKEDA T, FAN W, FENG Q P, et al. Cryogenic mechanical properties of woven glass/epoxy composites modified with multi-walled carbon nanotube and n-butyl glycidyl ether under tensile static and cyclic loadings[J]. Cryogenics, 2013, 58:33-37.
[4]  RAY B C. Loading rate sensitivity of glass fiber-epoxy composite at ambient and sub-ambient temperatures[J]. Journal of Reinforced Plastics and Composites, 2006, 25(3):329-333.
[5]  SANADA K, SANGA H, SHINDO Y. Cryogenic tensile and fracture properties of carbon nanofiber/poly-dicyclopentadiene composites fabricated by ultrasonic method[J]. Journal of Composite Materials, 2012, 46(12):1431-1438.
[6]  SHINDO Y, TAKEDA T, NARITA F. Mechanical response of nonwoven polyester fabric/epoxy composites at cryogenic temperatures[J]. Cryogenics, 2012, 52(10):564-568.
[7]  ZHAO F, HUANG Y D. Improved interfacial properties of carbon fiber/epoxy composites through grafting polyhedral oligomeric silsesquioxane on carbon fiber surface[J]. Materials Letters, 2010, 64(24):2742-2744.
[8]  GAO S L, MADER E, ZHANDAROV S F. Carbon fibers and composites with epoxy resins:Topography, fractography and interphases[J]. Carbon, 2004, 42(3):515-529.
[9]  KUMAR M S, SHARMA N, RAY B C. Microstructural and mechanical aspects of carbon/epoxy composites at liquid nitrogen temperature[J]. Journal of Reinforced Plastics and Composites, 2009, 28(16):2013-2023.
[10]  中国国家标准化管理委员会. 纤维增强塑料弯曲性能试验方法:GB/T 1449-2005[S]. 北京:中国标准出版社, 2005. Standardization Administration of the People's Republic of China. Fibre-reinforced plastic composites-Determination of flexural properties:GB/T 1449-2005[S]. Beijing:China Standards Press, 2005(in Chinese).
[11]  BECHEL V T, NEGILSKI M, JAMES J. Limiting the permeability of composites for cryogenic applications[J]. Composites Science and Technology, 2006, 66(13):2284-2295.
[12]  BECHEL V T, CAMPING J D, KIM R Y. Cryogenic/elevated temperature cycling induced leakage paths in PMCs[J]. Composites Part B:Engineering, 2005, 36(2):171-182.
[13]  BAI J, KOU H C, WANG J, et al. Strain rate response of a Ti-based metallic glass composite at cryogenic temperature[J]. Materials Letters, 2014, 117:228-230.
[14]  黄传军, 张以河, 付绍云, 等. SiO2/环氧树脂基纳米复合材料的室温和低温力学性能[J]. 复合材料学报, 2004, 21(4):77-81. HUANG C J, ZHANG Y H, FU S Y, et al. Mechanical properties of epoxy composites filled with SiO2 nano-particles at room and cryogenic temperatures[J]. Acta Materiae Compositae Sinica, 2004, 21(4):77-81(in Chinese).
[15]  HEYDENREICH R. Cryotanks in future vehicles[J]. Cryogenics, 1998, 38(1):125-130.
[16]  KANG S G, KIM M G, PARK S W, et al. Damage analysis of a type 3 cryogenic propellant tank after LN2 storage test[J]. Journal of Composite Materials, 2008, 42(10):975-992.
[17]  HIGUCHI K, TAKEUCHI S, SATO E, et al. Development and flight test of metal-lined CFRP cryogenic tank for reusable rocket[J]. Acta Astronaut, 2005, 57(2-8):432-437.
[18]  YOKOZEKI T, OGASAWARA T, AOKI T, et al. Experimental evaluation of gas permeability through damaged composite laminates for cryogenic tank[J]. Composites Science and Technology, 2009, 69(9):1334-1340.
[19]  沈小军, 孟令轩, 付绍云. 石墨烯-多壁碳纳米管协同增强环氧树脂复合材料的低温力学性能[J]. 复合材料学报, 2015, 32(1):21-26. SHEN X J, MENG L X, FU S Y. Cryogenic mechanical properties of epoxy composites synergistically reinforced by grapheme-multi-walled carbon nanotubes[J]. Acta Materiae Compositae Sinica, 2015, 32(1):21-26(in Chinese).
[20]  RAY B C. Effects of thermal and cryogenic conditionings on mechanical behavior of thermally shocked glass fiber-epoxy composites[J]. Journal of Reinforced Plastics and Composites, 2005, 24(7):713-717.
[21]  HARPER L T, TURNER T A, WARRIOR N A, et al. Characterisation of random carbon fibre composites from a directed fibre preforming process:Analysis of microstructural parameters[J]. Composites Part A:Applied Science and Manufacturing, 2006, 37(11):2136-2147.
[22]  国家质量技术监督局. 定向纤维增强塑料拉伸性能试验方法:GB/T 3354-1999[S]. 北京:中国标准出版社, 1999. The State Bureau of Quality and Technical Supervision. Test method for tensile properties of oriented fiber reinforced plastics:GB/T 3354-1999[S]. Beijing:China Standards Press, 1999(in Chinese).
[23]  BECHEL V T, FREDIN M B, DONALDSON S L, et al. Effect of stacking sequence on micro-cracking in a cryogenically cycled carbon/bismaleimide composite[J]. Composites Part A:Applied Science and Manufacturing, 2003, 34(7):663-666.

Full-Text

comments powered by Disqus