Mobile phones and other electronic devices are emitting radiations that will provide harmful effects to the human health. In order to measure the radiation, an innovative low cost measurement system is proposed in this paper. The ideology is to simplify the circuit’s value by converting a voltage detecting circuit to a field detecting circuit by finding an optimum resistance on trial and error basis. The requirement for a trial and error technique is to not allow too high or too low resistance which can be either short or open, resulting provides more damage to the circuit.
References
[1]
Ioriatti, L., Martinelli, M., Viani, F., Benedetti, M. and Massa, A. (2009) Real-Time Distributed Monitoring of Electro Magnetic Pollution in Urban Environments. IEEE International Geoscience and Remote Sensing Symposium, IGARSS, 5, 100-103.
[2]
Wadhwa, C.L. (2007) High Voltage Engineering. 2nd Edition, New Age International Private Limited, New Delhi.
[3]
Shen, X.L., Wang, F., Zeng, R. and Geng, Y.N. (2012) Lightning Impulse Electric Field Measurement in Long Air Gap Based on the Integrated Electro-optical Measurement System. Proceedings of the 2012 International Conference on High Voltage Engineering and Application, Shanghai, 17-20 September 2012, 30-34. http://dx.doi.org/10.1109/ICHVE.2012.6357003
[4]
William McNulty (2011) Voltage Detection and Indication by Electric Field Measurement. HD Electric Company.