All Title Author
Keywords Abstract


重铬酸钾法测定铁矿石中全铁
Potassium Dichromate Method of Total Iron in Iron Ore

DOI: 10.12677/AAC.2013.31001, PP. 1-4

Keywords: 铁矿石;全铁;重铬酸钾法
Total Iron
, Potassium Dichromate Method

Full-Text   Cite this paper   Add to My Lib

Abstract:

本文简述了测定铁矿石中全铁三种测试方法并进行了比对,选择了三氯化钛–重铬酸钾–中性红指示剂法,实验研究了温度、溶样酸、介质酸、指示剂的选择及共存离子的消除,避免了汞带来的危害,取标样分析结果非常满意。
Three methods for determination total iron in iron ore were described and compared in this paper. The tita-nium trichloride, potassium dichromate and neutral red were selected as indicator. At the same time, the temperature, solution acid, medium acid, the selection for indictor and elimination of coexisting were all studied in this experiment, while the hazards posed by mercury was also avoid. At last, the results for analysis standard samples were very satis-factory.

References

[1]  ISO 9507, 铁压块中全铁含量分析[S]. 1990.
[2]  GB/T6730.5-2007, 铁矿石全铁含量的测定–三氯化钛还原法[S]. 2007.
[3]  章志青. 对无汞法测定全铁的改进[J]. 山西冶金, 2004, 1: 38-40.
[4]  李秀荣. 铁矿石中全铁的测定[J]. 内蒙古林业, 2004, 9: 30-33.
[5]  陈建亚. 铁矿石中全铁含量的测定–EDTA滴定法[J]. 福建分析测试, 2004, 12: 1916-1917.
[6]  冯宇新. 铁矿中全铁量的测定ISO法与国标法对比[J]. 分析与检测, 2005, 3: 19-20.

Full-Text

comments powered by Disqus