This paper presents the methods and techniques used in the recently developed JKMRC/FEI Mineral Liberation Analyser (MLA). The MLA system consists of a specially developed software package and a standard modern SEM fitted with an energy dispersive spectrum (EDS) analyser. The on-line program of the MLA software package controls the SEM, captures sample images, performs necessary image analysis and acquires EDS x-ray spectra unattended. Typically, 40 to 100 images (containing 4000 to 10,000 particles) are acquired for each sample block and a dozen blocks (of 30 mm in diameter) are measured overnight. The MLA off-line processing program transforms raw particle image with x-ray
data into particle mineral maps and calculates bulk and liberation data from particle mineral maps.
References
[1]
Hall, J S (1977) Composite mineral particles – analysis by automated scanning electron
microscopy, PhD thesis, JKMRC, The University of Queensland, Brisbane.
[2]
Gu, Y and Sugden, T (1995) A highly integrated SEM-EDS-IP system automated quantitative mineral analysis, Proceedings of the third biennial symposium on SEM imaging and analysis: applications and techniques, University of Melbourne. (Australian Society of Electron Microscopy)
[3]
King, R P (1993) Basic image analysis for mineralogy, in ICAM’93 Demonstration Workshop Manual, pp 119 – 139.
[4]
Jones, M. P. (1987). Applied mineralogy : a quantitative approach. London ; Norwell, MA., Graham & Trotman.
[5]
Petruk, W. (2000). Applied mineralogy in the mining industry. Amsterdam ; New York, Elsevier Science BV.
[6]
Petruk, W (1988) Automatic image analysis for mineral beneficiation, J. Metals, 40:29 – 31.
[7]
Petruk, W (1986) The MP-SEM-IPS image analysis system. CANMET Report 87-1E (CANMET, Dept Energy, Mines, And Resources, Canada)
[8]
Sutherland, D N (1998) Application of quantitative process mineralogy through the mining cycle, Proceedings of the AusIMM Annual Conference ’98, Mount Isa, pp 333 – 337 (The Australasian Institute of Mining and Metallurgy: Melbourne)
