This paper evaluates Ouallé clay for ceramic applications using geotechnical, chemical, mineralogical, thermal, and firing-based characterization methods. The study finds that the clay is mainly kaolinite-rich, moderately plastic, and potentially suitable as a base material for faience and fired clay products. The fired specimens show acceptable shrinkage, but the porosity remains high and the maximum compressive strength is moderate.
References
[1]
Lindsay, B. (2022) The Mineral Fraction of Soil. Pearson Education.
[2]
El Yakoubi, N., Aberkan, M. and Ouadia, M. (2006) Potentialité d’utilisation d’argiles marocaines de Jbel Kharrou dans l’industrie céramique. Comptes Rendus. Géoscience, 338, 693-702. https://doi.org/10.1016/j.crte.2006.03.017
[3]
Sadik, C., El Amrani, I. and Albizane, A. (2012) Influence de la nature chimique et minéralogique des argiles et du processus de fabrication sur la qualité des carreaux céramiques. MATEC Web of Conferences, 2, Article ID: 01016. https://doi.org/10.1051/matecconf/20120201016
[4]
Aras, A. (2004) The Change of Phase Composition in Kaolinite-and Illite-Rich Clay-Based Ceramic Bodies. AppliedClayScience, 24, 257-269. https://doi.org/10.1016/j.clay.2003.08.012
[5]
Bensalem, H., Aadjour, M., El Hadi, H. and Saber, N. (2014) Evaluation of the Industrial Quality of Fibrous Clays from Bled Rmel, Gharb Basin, Morocco. European Scientific Journal, 10, No. 2.
[6]
Lanson, B., Beaufort, D., et al. (1996) Illitization of Diagenetic Kaolinite-To-Dickite Conversion Series: Late-Stage Diagenesis of the Lower Permian Rotliegend Sandstone Reservoir, Offshore of the Netherlands. SEPMJournalofSedimentaryResearch, 66, 501-518. https://doi.org/10.1306/d4268392-2b26-11d7-8648000102c1865d
[7]
Ait Said, A., Bey, K., Hadriche, I. and Bradai, C. (2022) Comportement mécanique en fatigue d’un composite sandwich à ame en nids d’abeilles en flexion 3 points. https://dspace.univ-annaba.dz//handle/123456789/3411
[8]
Sigg, J. (1991) Terracotta Products. Septima.
[9]
Moutou, J.M., Mbedi, R., Elimbi, A., Njopwouo, D., Yvon, J., et al. (2012) Mineralogy and Thermal Behaviour of the Kaolinitic Clay of Loutété (Congo-Brazzaville). Research Journal of Environmental and Earth Sciences, 4, 320. https://hal.science/hal-02505729v1
[10]
Ndzana, E.J.A., Njoya, D., Elimbi, A., Ranaivoarivo, G.V., Lecomte-Nana, G., Nzeukou, A.N., et al. (2019) Cocoa Cortex Ashes as Fluxing Additive for Vitrified Ceramic Making from Alluvial Clay. Journal of Materials Science and Chemical Engineering, 7, 24-39. https://doi.org/10.4236/msce.2019.710003
[11]
Wu, Y., German, R.M., Blaine, D., Marx, B. and Schlaefer, C. (2002) Effects of Residual Carbon Content on Sintering Shrinkage, Microstructure and Mechanical Properties of Injection Molded 17-4 PH Stainless Steel. JournalofMaterialsScience, 37, 3573-3583. https://doi.org/10.1023/a:1016532418920
[12]
Andreola, F., Barbieri, L., Lancellotti, I., Leonelli, C. and Manfredini, T. (2016) Recycling of Industrial Wastes in Ceramic Manufacturing: State of Art and Glass Case Studies. Ceramics International, 42, 13333-13338. https://doi.org/10.1016/j.ceramint.2016.05.205
Bartusch, R. and H?ndle, F. (2009) Laminations in Extrusion. In: H?ndle, F., Ed., Extrusion in Ceramics, Springer, 187-210. https://doi.org/10.1007/978-3-540-27102-4_10
