In this paper, the composition, two-dimensional and three-dimensional microstructure of heat-resistant wrought aluminum alloy with strong oxidation resistance, heat resistance and easy processing are analyzed by using direct reading spectrometer, metallographic microscope and scanning electron microscope. The main alloy elements of heat-resistant forging aluminum alloy include Cu, Mg, Si, Ni and Fe. The α solid solution of each element in aluminum consists of S phase (Al2CuMg), Mg2Si phase, bright gray Al2CuNi phase and dark brown Al9FeNi phase. The distribution of each phase in the aluminum alloy is determined by the three-dimensional energy spectrum analysis of the microstructure, and the distribution of each phase in the crystal position is analyzed. The mechanism of heat resistance, easy processing type and wear resistance is obtained, which provides the theoretical basis for the development and use of heat-resistant forged aluminum alloy.
References
[1]
Yang, H.W., Wang, X., Zhu, Z.T. and Liu, R.L. (2022) Discharge Characteristic of Micro-Arc Oxidation on Aluminum Alloy under the Changing Electrolyte Temperature. Journal of Materials Science and Chemical Engineering, 10, 24-35. https://doi.org/10.4236/msce.2022.1011003
[2]
Jiang, Y.R., Shi, J. and Li, S.Q. (2021) Study on the Analysis of Main Components of Aluminum Alloy by XRF (X-Ray Fluorescence Analysis) Method. Open Access Library Journal, 8, e7845.
[3]
Du, W. and Tian, C.L. (2019) Deformation Analysis and Correction Technology of 2A70 Aluminum Alloy Plate Parts. Modern Manufacturing Engineering, No. 9, 95-97. (In Chinese)
[4]
Qiao, F.L. (2010) Study on Friction Stir Welding Process of 2A70 Aluminum Alloy Thick Plate. Harbin Institute of Technology, 1-10. (In Chinese)
[5]
Jiang, D., Yi, Y.P. and Huang, S.Q. (2017) Experimental Study on the Microscopic Mechanism of Expansion Strengthening of 2A70 Aluminum Alloy Ring. Hot Working Technology, 46, 75-78. (In Chinese)
[6]
Gong, H., Lin, C.X. and Cao, B. (2019) Effect of Over-Aging Heat Treatment on Microstructure and Properties of 2A70 Aluminum Alloy. Hot Working Technology, 48, 161-164. (In Chinese)
[7]
Yang, Z.H. (1993) Application of Aluminum and Its Alloys in Electrical Industry. Aluminum Processing, 16, 10-15. (In Chinese)
[8]
Liu, D.Y., Liu, J.J., Hou, S.X., et al. (2013) Development of Heat-Resistant Aluminum Alloy Wire. Heat Treatment Technology and Equipment, 34, 1-5. (In Chinese)
[9]
You, C.Y. (2006) Application Research of Capacitive Conductor in Overhead Transmission Line. Electric Power Equipment, 7, 1-7. (In Chinese)
[10]
You, C.Y. (2003) Heat Resistance Mechanism of Heat-Resistant Aluminum Alloy Wire and Its Application in Power Transmission Lines. Electric Power Construction, 24, 4-8. (In Chinese)
[11]
You, W.R., Miao, X.L. and Lu, W. (2005) A Method for Manufacturing High Conductive and Heat Resistant Aluminum Alloy Wire. CN200510111000.X.
[12]
Deng, Y.H. (2006) Performance and Application of 60% IACS Heat-Resistant Aluminum Alloy Conductor. Guangdong Power Transmission and Transformation Technology, No. 4, 47-49. (In Chinese)
[13]
Ding, G.X., Sun, Z.S., Zhang, Q., et al. (2012) Application Analysis of Energy-Saving Wires in Transmission Lines. Power Grid Technology, 36, 24-30. (In Chinese)
[14]
Peng, N.Y. and LI, J.J. (2010) Application Research of New Heat-Resistant Aluminum Alloy Wire Transmission Technology. Guangdong Electric Power, 23, 19-22. (In Chinese)
