|
|
钢丝缠绕剖分式扁挤压筒及其有限元分析
|
Abstract:
针对多层扁挤压筒结构圆弧过渡处容易出现应力集中及存在的制造装配困难等问题，提出了预应力钢丝缠绕剖分式扁挤压筒结构，并根据未裂先分原理将扁挤压筒内层沿长轴进行剖分，进而改变扁挤压筒内层的受力状态。通过有限元方法对整体式和剖分式预应力钢丝缠绕扁挤压筒进行对比分析，结果表明：内层扁挤压筒经过剖分后，其内壁圆弧过渡处的应力峰值显著下降，内壁应力分布更加均匀；剖分后的扁挤压筒抗挤压能力上升，内层疲劳破坏风险下降，使用寿命提高。
In order to solve the problems of stress concentration and assembly difficulty in the arc transition of multi-layer flat extrusion tube structure, a new type of flat extrusion tube structure with pre-stressed steel wire winding and splitting is proposed. According to the principle of splitting before cracking, the inner layer of flat extrusion tube is divided along the long axis, and then the stress state of the inner layer of flat extrusion tube is changed. The finite element method is used to com-pare and analyze the integral and split prestressed steel wire winding flat extrusion cylinder. The results show that the stress peak value of the inner flat extrusion cylinder at the arc transition of the inner wall decreases significantly after the inner flat extrusion cylinder is dissected, and the stress distribution of the inner wall is more uniform; the anti extrusion ability of the split flat extru-sion cylinder increases, the risk of inner fatigue failure decreases, and the service life increases.
| [1] | 张君, 侯永超, 杨建, 等. 高性能精密工业铝型材有效摩擦挤压成形关键技术研究与应用[J]. 塑性工程学报, 2020, 27(2): 53-59. |
| [2] | Xu, L., Yao, Z.Q., Liu, J.P., et al. (2021) Constitutive Model Parameter Identification for 6063 Aluminum Alloy Using Inverse Analysis Method for Extrusion Applications. Journal of Materials Engineering and Performance, 30, 7449-7460.
https://doi.org/10.1007/s11665-021-05897-9 |
| [3] | 尹君, 成小乐, 胥光申, 等. 应力释放扁挤压筒的优化设计[J]. 西安交通大学学报, 2018, 52(7): 146-152. |
| [4] | 罗远新, 徐俊峰, 王勇勤, 等. 挤压筒内筒磨损有限元分析[J]. 重型机械, 2019(4): 73-77. |
| [5] | 成小乐, 冯亚斌, 肖锦祺, 等. 扁挤压筒优化设计方法研究[J]. 重型机械, 2020(4): 6-16. |
| [6] | Wang, D., Zhang, C.S., Wang, C.X., et al. (2018) Application and Analysis of Spread Die and Flat Container in the Extrusion of a Large-Size, Hollow, and Flat-Wide Aluminum Alloy Profile. The International Journal of Advanced Manufacturing Technology, 94, 4247-4263. https://doi.org/10.1007/s00170-017-1127-y |
| [7] | Alegre, J.M., Bravo, P., Preciado, M., et al. (2010) Sim-ulation Procedure of High Pressure Vessels Using the Wire Winding Technique. Engineering Failure Analysis, 17, 61-69. https://doi.org/10.1016/j.engfailanal.2008.11.004 |
| [8] | 杨晓俊, 夏卫明. 等剪应力钢丝缠绕缸筒的有限元模拟与应用[J]. 锻压技术, 2020, 45(9): 201-211. |
| [9] | Liu, C.Y., Zhang, L., Lin, F., et al. (2014) A Novel Design of Extrusion Container for Large Steel Tube Extrusion Process. Proceedings of the Institution of Mechanical Engineers, Part B: Engineering Manufac-ture, 228, 255-265.
https://doi.org/10.1177/0954405413484910 |
| [10] | 吴任东, 王雪凤, 张磊. 预应力钢丝缠绕剖分-组合挤压筒[J]. 清华大学学报: 自然科学版, 2010, 50(7): 974-979. |
| [11] | Liu, C.Y., Zhang, R.J., Yan, Y.N., et al. (2017) Analysis on the Design of Steel Wire Wound Extrusion Containers for Hot Extrusion Process. Advances in Mechanical Engineering, 9, 798-809. https://doi.org/10.1177/1687814017712417 |
| [12] | 颜永年. 预应力钢丝缠绕筒体的设计计算[J]. 清华大学学报: 自然科学版, 1978(4): 106-119. |
