Numerical simulation of single

A universal method is established to research the various possible damage modes of adhesive bond of laminated composites with or without z-pin reinforcements under tensile loads through numerical simulation. A Continuum Damage Mechanic model based on Hashin damage criterion as a user-defined subroutine is developed to simulate the damage of laminates and Z-pins. The Cohesive Zone Model is used to simulate the damage of adhesive damage, interlayer delamination, and Z-pin slipping-out phenomenon. The numerical simulation method is validated for simulating the various damage modes of the usual composite joints through comparing the simulated results and experiments. The research shows that different ply sequences induce different damage modes and ultimate failure loads of composite joints. The ultimate failure load of joint under tension is not affected obviously whether the joints are reinforced with or without z-pins. The reason is that the damage initiation usually locates at the two sides of adhesive zone and z-pins do not react on the reinforcement under tensile load of joint