Power flow analysis is a numerical way of study of behavior of flow of electric power in an interconnected system. In order to meet the growing demands of electrical energy in an optimum way, there is a need to upgrade existing systems or to install new systems. Therefore, planning of new installations and determination of best operating conditions of existing systems need power flow analysis. In this way, cost/benefit ratio for both suppliers and customers is maintained. This research involves the design and power flow analysis of IEEE-14 bus system. Newton Raphson method is applied for better efficiency and reduced computational time. Simulation analysis is conducted in ETAP software because of its excessive used in real life systems.
References
[1]
Muzzammel, R., Ahsan, M. and Ahmad, W. (2015) Non-Linear Analytic Approaches of Power Flow Analysis and Voltage Profile Improvement. 2015 Power Generation System and Renewable Energy Technologies (PGSRET), Islamabad, June 2015, 1-7.
[2]
Saadat, H. (1999) Power System Analysis. Mc Graw-hill, Inc., 2 Pennsylvania Plaza New York City.
[3]
Stevenson, W.D. (1982) Elements of Paver System Analysis. McGraw-Hill, 2 Pennsylvania Plaza New York City.
[4]
Athay, T. (1983) An Overview of Power Flow Analysis. 1983 American Control Conference, San Francisco, CA, USA, 22-24 June 1983, 404-410.
https://doi.org/10.23919/ACC.1983.4788145
[5]
Mešanović, A., Münz, U. and Ebenbauer, C. (2018) Robust Optimal Power Flow for Mixed AC/DC Transmission Systems with Volatile Renewables. IEEE Transactions on Power Systems, 33, 5171-5182. https://doi.org/10.1109/TPWRS.2018.2804358
[6]
Levron, Y., Guerrero, J.M. and Beck, Y. (2013) Optimal Power Flow in Microgrids with Energy Storage. IEEE Transactions on Power Systems, 28, 3226-3234.
https://doi.org/10.1109/TPWRS.2013.2245925
[7]
Stott, B. (1974) Review of Load-Flow Calculation Methods. Proceedings of the IEEE, 62, 916-929. https://doi.org/10.1109/PROC.1974.9544
[8]
Fikri, M., Cheddadi, B., Sabri, O., Haidi, T., Abdelaziz, B. and Majdoub, M. (2018) Power Flow Analysis by Numerical Techniques and Artificial Neural Networks. 2018 Renewable Energies, Power Systems & Green Inclusive Economy (REPS-GIE), Casablanca, 23-24 April 2018, 1-5. https://doi.org/10.1109/REPSGIE.2018.8488870
[9]
Montoya, O.D., Garrido, V.M., Gil-González, W. and Grisales-Noreña, L. (2019) Power Flow Analysis in DC Grids: Two Alternative Numerical Methods. IEEE Transactions on Circuits and Systems II: Express Briefs, 1-1.
https://doi.org/10.1109/TCSII.2019.2891640
[10]
Asrari, A. and Ramos, B. (2018) Power System Protection Upgrade at Anclote Plant a Case Study in Florida State. 2018 IEEE Texas Power and Energy Conference (TPEC), College Station, TX, 8-9 February 2018, 1-6.
https://doi.org/10.1109/TPEC.2018.8312091
[11]
Chandraratne, C., Woo, W.L., Logenthiran, T. and Naayagi, R.T. (2018) Adaptive Overcurrent Protection for Power Systems with Distributed Generators. 2018 8th International Conference on Power and Energy Systems (ICPES), Colombo, Sri Lanka, 21-22 December 2018, 98-103.
https://doi.org/10.1109/ICPESYS.2018.8626908
[12]
Soni, C.J., Gandhi, P.R. and Takalkar, S.M. (2015) Design and Analysis of 11 KV Distribution System Using ETAP Software. 2015 International Conference on Computation of Power, Energy, Information and Communication (ICCPEIC), Chennai, Chennai, 22-23 April 2015, 0451-0456.
https://doi.org/10.1109/ICCPEIC.2015.7259526
[13]
Alinejad-Beromi, Y., Sedighizadeh, M., Bayat, M.R. and Khodayar, M.E. (2007) Using Genetic Alghoritm for Distributed Generation Allocation to Reduce Losses and Improve Voltage Profile. 2007 42nd International Universities Power Engineering Conference, Brighton, 4-6 September 2007, 954-959.
https://doi.org/10.1109/UPEC.2007.4469077
