Al2O3纤维对SiO2基陶瓷型芯的烧缩阻滞
Effect of Al2O3 fiber on shrinkage blocking of SiO2 matrix ceramic core

DOI: 10.13801/j.cnki.fhclxb.20170418.001

Keywords: Al2O3纤维,Al2O3/SiO2,陶瓷型芯,石英玻璃,烧结收缩
Al2O3 fiber,Al2O3/SiO2,ceramic core,quartz glass,sintering shrinkage

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	吴新正, 邓湘云, 李建保, 等. α-石英方石英转变的研究[J]. 材料工程, 2009(s2):67-69. WU X Z, DENG X Y, LI J B, et al. The critobalite transition of α-quartz[J]. Journal of Materials Engineering, 2009(s2):67-69(in Chinese).
[2]	任刚伟, 常亮, 卫晓辉, 等. 硅砖中方石英的晶体结构与形貌[J]. 硅酸盐学报, 2006, 34(1):123-126. REN G W, CHANG L, WEI X H, et al. Ctystal structure and morphology of α cristobalite in silica bricks[J]. Journal of the Chinese Ceramic Society, 2006, 34(1):123-126(in Chinese).
[3]	顾国红, 曹腊梅. 熔模铸造空心叶片用陶瓷型芯的发展[J]. 铸造技术, 2002, 23(2):80-83. GU G H, CAO L M. Development of ceramic cores for investment casting hollow blades[J]. Foundry Technology, 2002, 23(2):80-83(in Chinese).
[4]	张强. 硅基陶瓷型芯性能对空心叶片不露芯率的影响[J]. 铸造技术, 2004, 25(8):586-587. ZHANG Q. Effect of silica-based ceramic core on non core-basseted rate of hollow blade[J]. Foundry Technology, 2004, 25(8):586-587(in Chinese).
[5]	张伟, 张玉军, 陈坤, 等. 浅谈熔模铸造陶瓷型芯研究现状[J]. 陶瓷, 2007(12):8-11. ZHANG W, ZHANG Y J, CHEN K, et al. Renew of lost pattern ceramic core by precision casting[J]. Ceramics, 2007(12):8-11(in Chinese).
[6]	WERESZCZAK A A, BREDER K, FERBER M K, et al. Dimensional changes and creep of silica core ceramics used in investment casting of superalloys[J]. Journal of Materials Science, 2002, 37(19):4235-4245.
[7]	李倩, 马德文, 蒋殷红, 等. 影响定向空心叶片陶瓷型芯性能的一个重要因素:方石英含量的控制[J]. 材料工程, 1994(5):18-19. LI Q, MA D W, JIANG Y H, et al. Effect of cristobalite content on the properties of ceramic core in making directionally solidified hollow blade[J]. Materials Engineering, 1994(5):18-19(in Chinese).
[8]	康海峰, 李飞, 赵彦杰, 等. 高温合金空心叶片精密铸造用陶瓷型芯与型壳的研究现状[J]. 材料工程, 2013(8):85-91. KANG H F, LI F, ZHAO Y J, et al. Research status on ceramic cores and shells for superalloy hollow blades investment casting[J]. Materials Engineering, 2013(8):85-91(in Chinese).
[9]	熊建平, 赵国庆, 戴斌煜, 等. 陶瓷型芯在航空发动机叶片生产中的应用与发展[J]. 江西科学报, 2007, 25(6):801-806. XIONG J P, ZHAO G Q, DAI B Y, et al. Application and development of ceramic core in production of aero engine blade[J]. Jiangxi Science, 2007, 25(6):801-806(in Chinese).
[10]	赵效忠. 陶瓷型芯的制备与使用[M]. 北京:科学出版社, 2013. ZHAO X Z. Preparation and application of ceramic core[M]. Beijing:Science Press, 2013(in Chinese).
[11]	贺靠团, 马德文, 蒋殷鸿, 等. 空心叶片复杂硅基陶瓷型芯的粉料粒度[J]. 材料工程, 1992(1):34-35. HE K T, MA D W, JIANG Y H, et al. Particle size of hollow blade complex silicon-based ceramic core[J]. Materials Engineering, 1992(1):34-35(in Chinese).
[12]	覃业霞, 张睿, 杜爱兵, 等. 粉料季度对氧化铝基陶瓷型芯材料性能的影响[J]. 稀有金属材料与工程, 2007, 36(S1):711-713. QIN Y X, ZHANG R, DU A B, et al. Effect of quarterly powder on properties of alumina-based ceramic core materials[J]. Rare Metal Materials and Engineering, 2007, 36(S1):711-713(in Chinese).
[13]	覃业霞, 潘伟. 蓝晶石对氧化铝基复合陶瓷型芯性能的影响[J]. 稀有金属材料与工程, 2008, 38(s2):223-225. QIN Y X, PAN W. Effects of kyanite on the properties of alumina-based composite ceramic core[J]. Rare Metal Materials and Engineering, 2008, 38(s2):223-225(in Chinese).
[14]	芦刚, 纪超众, 严青松, 等. 陶瓷纤维长度对复合精铸型壳抗弯强度与透气性的影响及增强行为[J]. 复合材料学报, 2017, 34(4):865-872. LU G, JI C Z, YAN Q S, et al. Effects and enhanced behavior of ceramic fiber length on bending strength and breathability of composite shell for investment casting[J]. Acta Meterial Compositae Sinica, 2017, 34(4):865-872(in Chinese).
[15]	孙爱芳, 刘敏珊, 董其伍. 短切纤维增强复合材料拉伸强度的预测[J]. 材料研究学报, 2008, 22(3):333-336. SUN A F, LIU M S, DONG Q W. Prediction of tensile strength for short-fiber-reinforced composites[J]. Chinese Joural of Materials Research, 2008, 22(3):333-336(in Chinese).
[16]	陈冰. 聚合物和纤维增强硅溶胶-国外精铸技术进展述评(4)[J]. 特种铸造及有色合金, 2005, 25(4):231-233. CHEN B. Review of progress in investment casting technology at abroad Part Ⅲ:Polymer and fibre reinforced sol silicate[J]. Special Casting and Nonferrous Alloys, 2005, 25(4):231-233(in Chinese).
[17]	国防科学技术工业委员会. 熔模铸造陶瓷型芯性能试验方法第2部分:烧成收缩率的测定:HB 5353.2-2004[S]. 北京:中国航空综合技术研究所,2004. State Administration of Science, Technology, and Industry for National Defense. Test method for properties of investment casting ceramic core-Part 2:Determination of sintered shrinkage:HB 5353.2-2004[S]. Beijing:AVIC China Aero-Polytechnology Establishvient, 2004(in Chinese).
[18]	王毅强. 硅基陶瓷型芯制备与性能分析[D]. 西安:西北工业大学, 2005. WANG Y Q. Preparation and properties of silica-based ceramic core[D]. Xi'an:Northwestern Polytechnical University, 2005(in Chinese).
[19]	杨来侠, 段志军, 吴海华. 氧化铝陶瓷型芯凝胶成型因素研究[J]. 特种铸造及有色合金, 2010, 30(2):149-152. YANG L X, DUAN Z J, WU H H. Study on the forming factors of alumina ceramic core gel[J]. Special Casting & Nonferrous Alloys, 2010, 30(2):149-152(in Chinese).
[20]	TUAN K T, DONG J K. High strain rate effects on direct tensile behavior of high performance fiber reinforced cementitious composites[J]. Cement and Concrete Composites, 2014, 45:186-200.
[21]	王婕丽, 林文松, 姜自旺, 等. 纤维结构钼铜复合材料的制备及组织性能[J]. 中国有色金属学报, 2014, 24(1):174-178. WANG J L, LIN W S, JIANG Z W, et al. Fabrication and structure properties of fiber-structured Mo-Cu composites[J]. The Chinese Journal of Nonferrous Metals, 2014, 24(1):174-178(in Chinese).

Full-Text