|
|
- 2017
表面改性对活性炭孔结构及热电转换性能的影响
|
Abstract:
为探究表面改性对活性炭孔结构及热电转换性能的影响，使用HNO3和KOH在不同条件下对活性炭进行表面改性，用N2吸附法和XRD图谱表征活性炭改性前后孔结构和石墨化程度的变化。结果表明，改性后活性炭的比表面积和孔容提高，平均孔径减小，并存在石墨晶体结构。干法改性活性炭的比表面积和总孔容由1 077.880 m2/g和0.763 cm3/g分别增加到1 635.268 m2/g和1.128 cm3/g，并且微孔的孔容增加。改性处理可以去除活性炭中的杂质。分别以改性前后活性炭为材料制备固体电极，KCl为电解液，测试活性炭电极的热电转换性能，发现改性后活性炭具有更高的热电转换性能。 In order to explore the effect of surface modification on pore structure and thermal-electric energy conversion of activated carbon, activated carbons were first modified by surface treatment using HNO3 and KOH under different conditions. The pore structure and graphitic-type structure of the activated carbons were characterized by N2 adsorption and XRD. The specific surface area and pore volume of the activated carbon are significantly increased by the surface treatments, while the average pore size and presence of graphite crystal structure are slightly affected. For the dry modification method, the specific surface area and pore volume are increased from 1 077.880 m2/g and 0.763 cm3/g to 1 635.268 m2/g and 1.128 cm3/g, respectively. Furthermore, after modification, the micropore volume is increased and the impurities of the activated carbon are removed. The performance of thermal-electric energy conversion of the activated carbon is tested by using the activated carbon as solid electrode materials and KCl solution as electrolyte, which shows the treated activated carbon has better performance. 国家自然科学基金（11302163；11572239；11572238；11372241）；陕西省自然科学基金（2015JM1021）
| [1] | 艾子萍, 刘宏. 方钴矿(NaFe4P12)-聚苯胺复合材料的制备及复合过程的研究[J]. 复合材料学报, 2004, 21(2):55-59. AI Z P, LIU H. Preparation and studies of skutterudite-polyaniline compsite[J]. Acta Materiae Compositae Sinica, 2004, 21(2):55-59 (in Chinese). |
| [2] | LIU W, YAN X, CHEN G, et al. Recent advances in thermoelectric nanocomposites[J]. Nano Energy, 2012, 1(1):42-56. |
| [3] | CHEN X, XU B X, LIU L. Nanoscale fluid mechanics and energy conversion[J]. Applied Mechanics Reviews, 2014, 66(5):050803. |
| [4] | 蒋绍阶, 马丹丹, 盛贵尚, 等. KOH改性活性炭涂层电极的电容去离子性能研究[J]. 工业水处理, 2015, 35(9):53-56. JIANG S J, MA D D, SHENG G S, et al. Research on the capacitive deionization performance of activated carbon-coated electrodes modified with KOH[J]. Industrial Water Treatment, 2015, 35(9):53-56 (in Chinese). |
| [5] | 胡中华, 万翔, 刘亚菲, 等. 改性活性炭双电层电容器电极材料研究[J]. 电子元件与材料, 2006, 25(8):11-15. HU Z H, WAN X, LIU Y F, et al. Modification of activated carbon as electrode material for electric double-layer capacitor[J]. Electroninc Components & Materials, 2006, 25(8):11-15 (in Chinese). |
| [6] | LOZANO-CASTELLó D, LILLO-RóDENAS M A, CAZORLA-AMORóS D, et al. Preparation of activated carbons from Spanish anthracite I:Activation by KOH[J]. Carbon, 2001, 39(5):741-749. |
| [7] | 刘文宏, 袁怀波, 吕建平. 不同温度下HNO3改性对活性炭吸附银的影响[J]. 中国有色金属学报, 2007, 17(4):663-667. LIU W H, YUAN H B, LV J P. Effect of modification of activated carbon with HNO3 at different temperature on silver adsorption[J]. The Chinese Journal of Nonferrous Metals, 2007, 17(4):663-667 (in Chinese). |
| [8] | 陈玉莲, 吴秋芳, 孔凡滔. 酸碱改性活性炭对甲苯的吸附性能研究[J]. 环境工程, 2016, 34(2):91-95. CHEN Y L, WU Q F, KONG F T. Study on the toluene adsorption on activated carbon modified by acid and alkali[J]. Air Pollution Control, 2016, 34(2):91-95 (in Chinese). |
| [9] | WANG J X, HUANG Z P, DUAN H L, et al. Surface stress effect in mechanics of nanostructured materials[J]. Acta Mechanica Solida Sinica, 2011, 24(1):52-82. |
| [10] | SONG X, ZHANG Y, CHANG C. Novel method for preparing activated carbons with high specific surface area from rice husk[J]. Industrial & Engineering Chemistry Research, 2012, 51(46):15075-15081. |
| [11] | HUANG W, ZHANG H, HUANG Y, et al. Hierarchical porous carbon obtained from animal bone and evaluation in electric double-layer capacitors[J]. Carbon, 2011, 49(3):838-843. |
| [12] | XU B.X, LIU L, LIM H, et al. Harvesting energy from low-grade heat based on nanofluids[J]. Nano Energy, 2012, 1(6):805-811. |
| [13] | QIAO Y, PUNYAMURTULA V K, HAN A. Thermally induced capacitive effect of a nanoporous monel[J]. Applied Physics Letters, 2007, 91(15):153102-153103. |
| [14] | QIAO Y, PUNYAMURTUAL V K, HAN A, et al. Thermal-to-electric energy conversion of a nanoporous carbon[J]. Journal of Power Sources, 2008, 183(1):403-405. |
| [15] | 厉英, 王淑兰, 张大勇, 等. 热电材料的研究现状及发展[J]. 材料导报, 2005, 19(9):23-25. LI Y, WANG S L, ZHANG D Y, et al. Current status and development of thermoelectric materials[J]. Materials Review, 2005, 19(9):23-25 (in Chinese). |
| [16] | LIM H, LU W, CHEN X, et al. Effects of ion concentration on thermally-chargeable double-layer supercapacitors[J]. Nanotechnology, 2013, 24(46):465401-465405. |
| [17] | ZHANG W, ZHAO M, LIU R, et al. Hierarchical porous carbon derived from lignin for high performance supercapacitor[J]. Colloids & Surfaces A:Physicochemical & Engineering Aspects, 2015, 484:518-527. |
| [18] | 王新华. SiC-B4C复合膜的制备及其力学和热电性能[J]. 复合材料学报, 2004, 21(3):49-53. WANG X H. Preparation of SiC-B4C composite film and its mechanical and thermoelectric properties[J]. Acta Materiae Compositae Sinica, 2004, 21(3):49-53 (in Chinese). |
| [19] | KUMAR B, KIM S W. Energy harvesting based on semiconducting piezoelectric ZnO nanostructures[J]. Nano Energy, 2012, 1(3):342-355. |
| [20] | BONETTI M, NAKAMAE S, HUANG B T, et al. Thermoelectric energy recovery at ionic-liquid/electrode interface[J]. Journal of Chemical Physics, 2015, 142(24):244708. |
| [21] | 李崇俊, 马伯信, 霍肖旭. 炭/炭复合材料石墨化度的表征Ⅰ[J]. 新型炭材料, 1999, 14(1):19-25. LI C J, MA B X, HUO X X. Characterization of graphitization degree in C/C composites Ⅰ[J]. New Carbon Materials, 1999, 14(1):19-25 (in Chinese). |
| [22] | 中国国家标准化管理委员会. 木质活性炭试验方法、灰分含量的测定:GB/T 12496.3-1999[S]. 北京:中国标准出版社, 2000. Standardization Administration of the People's Republic of China. Test methods of wooden activated carbon-Determination of ash content:GB/T 12496.3-1999[S]. Beijing:China Standards Press, 2000. |
