亚临界流体挤出制备木粉/聚丙烯复合材料
Preparation of wood powder/polypropylene composites in presence of subcritical fluids

DOI: 10.13801/j.cnki.fhclxb.20161208.004

Keywords: 亚临界流体,聚丙烯,木粉,液化,界面结合,马来酸酐接枝聚丙烯
subcritical fluids,polypropylene,wood powder,liquefaction,interfacial adhesion,maleic anhydride grafted polypropylene

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	DAI H, SMITH M J, RAMANI K. Design and processing of a thermoplastic composite reinforced wood structure[J]. Polymer Composites, 2004, 25(2):119-133.
[2]	TEUBER L, OSBURG V, TOPOROWSKI W, et al. Wood polymer composites and their contribution to cascading utilisation[J]. Journal of Cleaner Production, 2016, 110:9-15.
[3]	OSBURG V, STRACK M, TOPOROWSKI W. Consumer acceptance of wood-polymer composites:A conjoint analytical approach with a focus on innovative and environmentally concerned consumers[J]. Journal of Cleaner Production, 2016, 110:180-190.
[4]	LIU R, SUN W, CAO J, et al. Surface properties of in situ organo-montmorillonite modified wood flour and the influence on mechanical properties of composites with polypropylene[J]. Applied Surface Science, 2016, 361:234-241.
[5]	LIN X, ZHANG Z, SUN J, et al. Effects of phosphorus-modified HZSM-5 on distribution of hydrocarbon compounds from wood-plastic composite pyrolysis using Py-GC/MS[J]. Journal of Analytical and Applied Pyrolysis, 2015, 116:223-230.
[6]	MATUANA L M, BALATINECZ J J, PARK C B. Effect of surface properties on the adhesion between PVC and wood veneer laminates[J]. Polymer Engineering and Science, 1998, 38(5):765-773.
[7]	OLAKANMI E O, OGUNESAN E A, VUNAIN E, et al. Mechanism of fiber/matrix bond and properties of wood polymer composites produced from alkaline treated Daniella oliveri wood flour[J]. Polymer Composites, 2015, 37(9):2657-2672.
[8]	LEBEDEV A E, KATALEVICH A M, MENSHUTINA N V. Modeling and scale-up of supercritical fluid processes. Part I:Supercritical drying[J]. The Journal of Supercritical Fluids, 2015, 106:122-132.
[9]	YAMAMOTO S, FURUSAWA T. Thermophysical flow simulations of rapid expansion of supercritical solutions (RESS)[J]. The Journal of Supercritical Fluids, 2015, 97:192-201.
[10]	孔维荣, 张云灿. 废旧轮胎胶脱硫再生方法研究进展[J]. 高分子通报, 2014(2):78-96. KONG W R, ZHANG Y C. Research advances of tire rubber devulcanizing and recycling technology[J]. Chinese Polymer Bulletin, 2014(2):78-96(in Chinese).
[11]	PIORO I L, DUFFEY R B. Experimental heat transfer in supercritical water flowing inside channels (survey)[J]. Nuclear Engineering and Design, 2005, 235(22):2407-2430.
[12]	王鉴, 冉玉霞, 邹恩广, 等. 超临界CO2协助三单体接枝改性聚丙烯[J]. 化学学报, 2009,67(10):1141-1146. WANG J, RAN Y X, ZOU E G, et al. Grafting of polypropylene with ternary monomer assisted by supercritical CO2[J]. Acta Chimica Sinica, 2009, 67(10):1141-1146(in Chinese).
[13]	SUN V Z, PARAMAN I, RIZVI S S H. Supercritical fluid extrusion of protein puff made with fruit pomace and liquid whey[J]. Food and Bioprocess Technology, 2015, 8(8):1707-1715.
[14]	MASATCIOGLU M T, YALCIN E, HWAN P J, et al. Hull-less barley flour supplemented corn extrudates produced by conventional extrusion and CO2 injection process[J]. Innovative Food Science & Emerging Technologies, 2014, 26:302-309.
[15]	中华人民共和国国家质量监督检验检疫总局. 塑料弯曲性能的测定:GB/T 9341-2008[S]. 北京:中国标准出版社, 2008. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Plastics-Determination of flexural properties:GB/T 9341-2008[S]. Beijing:China Standards Press, 2008(in Chinese).
[16]	MILLER J E, EVANS L, LITTLEWOLF A, et al. Batch microreactor studies of lignin and lignin model compound depolymerization by bases in alcohol solvents[J]. Fuel, 1999, 78(11):1363-1366.
[17]	MINAMI E, SAKA S. Comparison of the decomposition behaviors of hardwood and softwood in supercritical methanol[J]. Journal of Wood Science, 2003, 49(1):73-78.
[18]	郑怀玉. 木质生物质醇解液化的研究[D]. 福建:福建农林大学, 2014. ZHEN H Y. Study on alcoholysis liquefaction of woody biomass[D]. Fujian:Fujian Agriculture and Forestry University, 2014.
[19]	ISHIKAWA Y, SAKA S. Chemical conversion of cellulose as treated in supercritical methanol[J]. Cellulose, 2001, 8(3):189-195.
[20]	DEMAIN A L, NEWCOMB M, WU J. Cellulase, clostridia, and ethanol[J]. Microbiology and Molecular Biology Reviews, 2005, 69(1):124-154.
[21]	JERVIS E J, HAYNES C A, KILBURN D G. Surface diffusion of cellulases and their isolated binding domains on cellulose[J]. Journal of Biological Chemistry, 1997, 272(38):24016-24023.
[22]	NOTLEY S M, PETTERSSON B, WAGBERG L. Direct measurement of attractive van der waals' forces between regenerated cellulose surfaces in an aqueous environment[J]. Journal of the American Chemical Society, 2004, 126(43):13930-13931.
[23]	赵岩, 李冬, 陆文静, 等. 纤维素超临界水预处理与水解研究[J]. 化学学报, 2008(20):2295-2301. ZHAO Y, LI D, LU W J, et al. Supercritical pretreatment and hydrolyzation of cellulose[J]. Acta Chimica Sinica, 2008(20):2295-2301(in Chinese).
[24]	CARLBORN K, MATUANA L M. Influence of processing conditions and material compositions on the performance of formaldehyde-free wood-based composites[J]. Polymer Composites, 2006, 27(6):599-607.
[25]	MOELLER M, HARNISCH F, SCHROEDER U. Hydrothermal liquefaction of cellulose in subcritical water-the role of crystallinity on the cellulose reactivity[J]. RSC Advances, 2013, 3(27):11035-11044.
[26]	HWANG T Y, LEE S, YOO Y, et al. Reactive extrusion of polypropylene/polystyrene blends with supercritical carbon dioxide[J]. Macromolecular Research, 2012, 20(6):559-567.
[27]	WANG K, WANG S, WU F, et al. A new strategy for preparation of long-chain branched polypropylene via reactive extrusion with supercritical CO2 designed for an improved foaming approach[J]. Journal of Materials Science, 2016, 51(5):2705-2715.
[28]	李玉华, 孔维荣, 张玲, 等. 亚临界水挤出法制备ABS/木粉复合材料力学性能研究[J]. 中国塑料, 2015, 29(1):42-47. LI Y H, KONG W R, ZHANG L, et al. Mechanical properties of ABS/wood powder composite prepared by a twin-screw extruder with subcritical water[J]. China Plastics, 2015, 29(1):42-47(in Chinese).
[29]	中华人民共和国国家质量监督检验检疫总局. 塑料拉伸性能的测定第2部分:模塑和挤塑塑料的试验条件:GB/T 1040.2-2006[S]. 北京:中国标准出版社, 2006. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Plastics-Determination of tensile properties-Part 2:Test conditions for moulding and extrusion plastics:GB/T1040.2-2006[S]. Beijing:China Standards Press, 2006(in Chinese).
[30]	中华人民共和国国家质量监督检验检疫总局. 塑料悬臂梁冲击强度的测定:GB/T 1843-2008[S]. 北京:中国标准出版社, 2008. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Plastics-Determination of izod impact strength:GB/T 1843-2008[S]. Beijing:China Standards Press, 2008(in Chinese).
[31]	中华人民共和国国家质量监督检验检疫总局. 热塑性塑料熔体质量流动速率和熔体体积流动速率的测定:GB/T 3682-2000[S]. 北京:中国标准出版社, 2000. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics:GB/T 3682-2000[S]. Beijing:China Standards Press, 2000(in Chinese).
[32]	YAMAZAKI J, MINAMI E, SAKA S. Liquefaction of beech wood in various supercritical alcohols[J]. Journal of Wood Science, 2006, 52(6):527-532.
[33]	BARAKAT N A M, YOUSEF A, OBAID M, et al. Ag-doped M2O3 nanoflakes as effective catalyst for lignin liquefaction in supercritical methanol medium[J]. Ceramics International, 2016, 42(3):4386-4392.

Full-Text