全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
-  2017 

基于C-lens的光子带隙光纤准直器传输特性
Propagation characteristics of photonic bandgap fiber collimator with C-lens

DOI: 10.13700/j.bh.1001-5965.2016.0581

Keywords: 光子带隙光纤,束腰直径,工作距离,光纤准直器,C-lens
photonic bandgap fiber
,beam waist diameter,working distance,fiber collimator,C-lens

Full-Text   Cite this paper   Add to My Lib

Abstract:

摘要 研究了一种基于C-lens的光子带隙光纤准直器,由于光子带隙光纤准直器光纤端面没有反射,相比普通光纤准直器,其传输矩阵将发生变化。从高斯光束单透镜成像的一般模型出发,利用矩阵光学,在子午面和弧矢面推导了光线传输矩阵。结合实际应用中光子带隙光纤及C-lens透镜的参数,仿真分析了尾纤与C-lens透镜之间的间距及C-lens透镜的参数对工作距离和束腰直径大小的影响,理论得到了新模型下,光子带隙光纤准直器的出射光斑在子午面和弧矢面束腰直径和工作距离近似重合,相比普通光纤出射光斑的椭圆化程度小。研究结果对进行光子带隙光纤准直器及基于光纤准直器的光学器件设计与制作具有指导意义。
Abstract:A photonic bandgap fiber collimator with C-lens was proposed. The photonic crystal fiber end face does not have reflection, so the transform matrix will change. From the general model of Gaussian-beam imaging, using the theory of matrix optics, the matrix optics was calculated in meridian plane and sagittal plane respectively. Combined with practical applications in photonic bandgap fiber and C-lens related parameters, the influence of the distance between fiber tail and C-lens and the influence of the parameter of the C-lens on working distance and beam waist diameter of collimator were both stimulated and analyzed. The results of the analysis in new model show that the influence of the C-lens tile for meridian plane and sagittal plane was similar, and the Gaussian-beam ellipse was smaller compared with ordinary fiber. The result may direct the design of photonic bandgap fiber collimator and the design of optical device with photonic bandgap fiber collimator.

References

[1]  胡海蕾,陈荣,赖爱光,等.C-lens准直特性分析[J].福建师范大学学报,2005,21(1):36-40.HU H L,CHEN R,LAI A G,et al.Analysis of C-lens collimating propert[J].Journal of Fujian Normal University,2005,21(1):36-40(in Chinese).
[2]  王素芹,阮玉,殷东亮,等.C-lens准直器回波损耗的理论计算与分析[J].大气与环境光学学报,2003,16(1):24-28.WANG S Q,RUAN Y,YIN D L,et al.The calculation and analyzing of the RL of C-lens collimator[J].Optoelectronic Technology & Information,2003,16(1):24-28(in Chinese).
[3]  田燕宁, 方强, 王永昌.双通道光环形器结构的设计及理论分析[J].中国激光, 2004,31(11):1398-1402.TIAN Y N,FANG Q,WANG Y C.Structure and characteristics of a double function optical circulator with double fiber tip and lens twice[J].Chinese Journal of Lasers,2004,31(11):1398-1402(in Chinese).
[4]  林学煌.光无源器件[M].北京:人民邮电出版社,1998:164-171.LIN X H.Optical passive devices[M].Beijing:Posts and Telecom Press,1998:164-171(in Chinese).
[5]  JOANNOPOULOS J D,JOHNSON S G,WINN J N,et al.Photonic crystals:Molding the flow of light[M].Princeton:Princeton University Press,2011:30-90.
[6]  石飞飞.光子晶体光纤设计与传感特性研究[D].哈尔滨:哈尔滨工业大学,2013:5-9.SHI F F.Design and sensing characteristic on photonic crystal fibers[D].Harbin:Harbin Institute of Technology,2013:5-9(in Chinese).
[7]  KIM H,KIM J,PAEK U C,et al.Tunable photonic crystal fiber coupler based on a side-polish technique[J].Optics Letters,2004,29(11):1194-1196.
[8]  JAROSZEWICZ L R,STASIEWICZ A K,MARC P,et al.Broadband photonic crystal fiber coupler with polarization selection of coupling ratio[C]//Proceedings of 4th European Workshop on Optical Fiber Sensors.Bellingham,WA:SPIE,2010,7653:76533W.
[9]  代文,杨远洪,宋奎岩,等.基于渐变折射率透镜的低损耗1×N微结构光纤耦合方法[J].光学学报,2014,34(4):77-82.DAI W,YANG Y H,SONG K Y,et al.Low-loss 1×N microstructrued fiber coupling method with a single gradient index lens[J].Acta Optica Sinica,2014,34(4):77-82(in Chinese).
[10]  张璐.光子晶体光纤的低损耗透镜耦合技术[J].光学学报,2014,34(1):63-68.ZHANG L.Low-loss lens-coupling technique on photonic crystal fiber[J].Acta Optica Sinica,2014,34(1):63-68(in Chinese).
[11]  HIROOKA T,HORI Y,NAKAZAWA M. Gaussian and Sech approximations of mode field profiles in photonic crystal fibers[J].IEEE Photonics Technology Letters,2004,16(4):1071-1073.
[12]  张虎.空芯光子带隙光纤的结构设计和特性研究[D].北京:北京邮电大学,2009:1-4.ZHANG H.Structure design and property research of hollow-core photonic bandgap fibers[D].Beijing:Beijing University of Posts and Telecommunications,2009:1-4(in Chinese).
[13]  龚文杰.C-Lens准直器特性的研究[D].哈尔滨:哈尔滨工业大学,2006:2-16.GONG W J.Study of the C-lens collimator characteristics[D].Harbin:Harbin Industrial University,2006:2-16(in Chinese).
[14]  陆乔乔,胡姝玲,王鑫龙,等.大功率双包层光纤准直器的建模与仿真分析[J].红外与激光工程,2014,43(7):2055-2060.LU Q Q,HU S L,WANG X L,et al.Modeling and stimulation of high-power double-clad fiber collimator[J].Infrared and Laser Engineering,2014,43(7):2055-2060(in Chinese).
[15]  禹培栋,王国忠,陈明华,等.光开关技术进展[J].半导体光电,2001,22(3):149-154.YU P D,WANG G Z,CHEN M H,et al.Recent progress in optical switching[J].Semiconductor Optoelectronics,2001,22(3):149-154(in Chinese).
[16]  廖延彪.光纤光学[M].北京:清华大学出版社,2000:54-90.LIAO Y B.Fiber optics[M].Beijing:Tsinghua University Press,2000:54-90(in Chinese).

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133